Printable View
can anyone explain how to connect the cod and kidney armor pieces around the waist? i have not tried it yet (still waiting on ruffkin to get me stuff....that is another story :doh) but have been thinking about it and i am not sure if the girth belt is used, or elastic, or another belt....? anyone lend a hand? pics, or tutorial would be great....thanks!!
The cod and kidney plate are actually "bolted" together using the same type of stud seen on the shoulders. One stud per side.
the cod piece should slightly overlap the kidney plate. I've added velcro inside my cod piece close to my hips just to keep it in place. :thumbsup
I just added velcro and glued the studs on.
so what was the actual connection in ESB? any pics?
I saw the ROTJ costume and it had the same connection as the backplate on the codpiece, but was there a difference in ESB?
Probably not.Quote:
Originally Posted by volkerc
FettDad,
Don't have the pics readily available but here's how I did mine.
Using machined studs [same as the collar and backplate], screws and washers, I first drilled a hole thru both the cod and kidney plate at the sides after measuring.
And since Boba had a 'G-string' [I use this term loosely :lol], I glued on white elastic to the bottom of the cod and then had another elastic strap cut for the waist [this was done to give me a more comfortable form fit around the waist and some tension to hold up the cod piece and not worry about it sliding down :)]. \
The white elastic strap was then looped over the waist strap at the back [for the G look. :lol] and the ends of the waist strap was hole punched to accommodate the screw and washer that will poke thru from the inside and allow the machined stud to screw on from the outside.
So, if you're looking from the a layered view, you will see, starting from the inside: Screw head, washer, waist elastic strap, kidney plate, cod piece and then machined stud.
Hope this helps somehow... I'll try to get pics later tonite...
Stay safe,
Tim.
Quote:
Originally Posted by GCNgamer128
yeah, probably not. but i'm seeking confirmation what was used...
Problem is, ESB is extremely limited with reference.Quote:
Originally Posted by volkerc
I know, I know, that's what's killing me. I'm just hoping that someone here knows. See it could be that they used something ****** and than switched to the above mentioned method. And that's a question that bugs me for quite a while now.Quote:
Originally Posted by GCNgamer128
thanks guys for all your help on this...i should be getting my stuff this week, so i will check it over, put it on, with the g-string....ummm....:lol
but i think what you guys gave me will help a ton!!
It does a little bit, but pics would help out a ton for me to understand it better, so whenever you get around to it I guess.Quote:
Originally Posted by Halo_1
thanks
I am at the point of attaching the cod piece to the kidney plate myself. I was going to just use velcro, but I am toying with the idea of magnets.
Here are the pics...
Using machined studs [same as the collar and backplate], screws and washers, I first drilled a hole thru both the cod and kidney plate at the sides after measuring.
And since Boba had a 'G-string' [I use this term loosely ], I glued on white elastic to the bottom of the cod and then had another elastic strap cut for the waist [this was done to give me a more comfortable form fit around the waist and some tension to hold up the cod piece and not worry about it sliding down ].
The white elastic strap was then looped over the waist strap at the back [for the G look. ] and the ends of the waist strap was hole punched to accommodate the screw and washer that will poke thru from the inside and allow the machined stud to screw on from the outside.
http://img.photobucket.com/albums/v7...3/IMG_0228.jpg
http://img.photobucket.com/albums/v7...3/IMG_0227.jpg
http://img.photobucket.com/albums/v7...3/IMG_0229.jpg
http://img.photobucket.com/albums/v7...3/IMG_0236.jpg
So, if you're looking from the a layered view, you will see, starting from the inside: Screw head, washer, waist elastic strap, kidney plate, cod piece and then machined stud.
http://img.photobucket.com/albums/v7...3/IMG_0231.jpg
http://img.photobucket.com/albums/v7...3/IMG_0232.jpg
http://img.photobucket.com/albums/v7...3/IMG_0233.jpg
http://img.photobucket.com/albums/v7...3/IMG_0235.jpg
http://img.photobucket.com/albums/v7...3/IMG_0230.jpg
Hope this helps....
Stay safe,
Tim.
Nice cod there, Tim! Does that "G" ever slip on you since it's not connected to the kidney plate?
As for the connection in ESB, it's the same. Couldn't find a good ESB or pre-production pic, but you can see it on the Sandy armor pic that was in the Insider recently. Hope this helps.
Wow Tim, thanks a bunch! That helps me understand perfect now. Doesn't look hard either. You've been a tremendous help!
thanks.
totally helpful on that guys!!! looks easy enough, man!! appreciate the help as always...maybe someday i will be able to give good advice and pass on this rich tradition of helping the needy!! :)
My gear is set up exactly like Tim's except I don't use the black nylon. The white thong is attached to the kidney plate to the front of the codpiece.
Ryan,
The 'G' never slips. I made sure the elastic strap was 'tight' enough to prevent that from happening. :) Anyhow, with this set up, should I need to change the waist elastic strap, I can just slip it out, and slide on a new one. :)
Am glad I could help out Hunters. :cheers
Stay safe,
Tim.
Hey Tim, do you think this will work on a Bobamaker Armour set? :D and as bad as this sounds, do ya have any pics showing you in the Armour, with the Butt and G String setup :p
lol at G Strings.. at least we dont have to wear Diapers like the Scouts :p
Tim.. sweet set up bro (downloads pics) ;)
Thanks for sharing... :cheers
Matt,Quote:
Originally Posted by Alcfalath
It should work with any armor. :thumbsup I did post it up, it was in my build thread...no worries, here you go. This is the only pic I have:
http://img.photobucket.com/albums/v7...3/IMG_2181.jpg
Gav,
Glad it helps you out bro. ;)
Stay safe,
Tim.
Tim, thanks for the awesome tips on how to keep the cod/kidney pieces on and thanks to Darrell as well for posting this thread!
you are welcome, gene!! and thanks to all for the help, and the pics!! now, another problem...i just got my pieces from ruffkin, and guess what?!! i am to much a fat***!!:lol i kind of put the stuff around my waist, and maybe i just dont have enough hands (well, the wife thinks i do ;)) but it doesnt seem like my GUT will allow the kidney piece to slide into the cod piece...any suggestions? do i extend the kidney piece?
To extend the kidney piece I would suggest using one of those plastic "For Sale" signs that you can find at Home Depot or Lowes. You would probably need a little bondo to make the extension seamless.
Ah, so are you saying that once you attach the kidney and cod pieces together the circumference of the attached pieces doesn't allow you to fit in it? I'm a skinny dude so it shouldn't be an issue with me, but I would like to know how you'd go about extending it with one of those "for sale" signs (the bondo-ing process I don't quite get).Quote:
Originally Posted by FettDad
Here is a crude illustration on how this can be accomplished. The bondo is used to give the extension and the kidney plate a seamless (no gaps) clean look.
http://i131.photobucket.com/albums/p...ett/Slide1.jpg
Oh. Makes sense.
thanks!
NP LSOS!
looks great!! i can do that!! :cheering