ESB GAUNT WIRE COLOR'S

what are the colors of the wires on the esb gauntlets? they look like they go yellow red yellow/grey. what do you guy's think?

White on top,red in middle and black on bottom.


Steve

Hmmmmm.
I don't know but from the looks of this picture I am not seeing a black wire but it could just be me.

looking at the color simmalarity between the sholder bells and the top wire they look the same color dont they?

by the way im doing this as we speek so any info you guy's can give me would help greatly.

I would say from top to bottom... Yellow, Red, Grey

thats what it looks like to me so ima go with what you say.

I see white, red, and grey/black, depending on lighting. I'd would say it's black since those are the colours that come in those big wires with three wires inside...don't know what they're called exactly. Anyone else know what I'm referring to?

Id say its black

ok thats a good pic. white it is

a thought just crosed my mind. how thick are these wires?

I used 12ga. solid core for the top white wire.

I used a black cord from an old VCR and wrapped it with red electrical tape for the middle "red" wire.

I used the same black cord for the bottom black wire.

The bottom two red/black looked fatter than the top most white wire to me so I used what I thought the prop makers might have had on hand

Steve

can you post a quick pick so i can see what it looks like?

http://forums.thedentedhelmet.com/at...ntid=433&stc=1

Note the location of the first white wires entry point....it's supposed to be about midway from the top corner. Most I have seen make it too high.

nice gaunt's. thanks for the pic