Results 1 to 39 of 39

Building my armor/gauntlets...

Discussion on Building my armor/gauntlets... within the Boba Fett Armor forum, part of the Boba Fett category; My progress has been a bit slow - but it

  1. #1
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Building my armor/gauntlets...

    My progress has been a bit slow - but it is starting to gain momentum... I thought I would share it here and see what you all think...

    My gauntlets:
    This is how they looked when I first took them out of the box...




    This is what they look like today… ready to be premiered and painted…




    My Armor: So far…
    This is what I have of my chest and collar armor...



    I am still designing the actual chest pieces... they will look very close to Boba Fett's chest armor - just a bit more contoured to my body. No boob armor… I hate that look…




    Here is my stomach plate – I have not yet formed it to my body… but this is what it looks like flat…




    My cod piece is just about done…






    the dent in the front I burned in with a piece of pipe that I heated with a blow torch… it made the perfect dent… and will look a lot better once painted – I swear!


    My shoulder bells… they have already been premiered and are awaiting paint.




    As for the kneed I had a bit of a problem…
    I tried to make them out of one single piece and this is how they looked…




    Needless to say I don’t want to walk around looking like I have small boxes on my legs…
    So I am going a different route and am rebuilding the knees out of a bunch of separate pieces which will give me much more control and allow me to actually get a nice curve...

    Last edited by SarlaccBits; 03-07-2006 at 04:09 PM.

  2. TDH Sponsors
    The Dented Helmet Recommends
  3. #2
    fettishist's Avatar
    Join Date
    Feb 2006
    Location
    North London
    Posts
    52

    Re: Building my armor/gauntlets...

    Looking good so far!! Trust me, it will take a while and plenty of patience-and more than one attempt at painting and weathering if you are anything like me!! I just finished getting my knee armour the way I like it, and the same for the shoulders-will post some pics ltr!!!

  4. #3
    formerly joNich
    Join Date
    Dec 2005
    Location
    Columbus, OH
    Age
    30
    Posts
    589

    Re: Building my armor/gauntlets...

    Let me know how those knees work out. I too am going to try making them out of separate pieces...although I found I can't use bondo on any of the "joints" where the parts flex as it causes the bondo to just crack.

    I'm curious to see how you're going to put them together.

  5. #4
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    I will be using JB Weld to piece them together...
    much like evrything else
    JB Weld is awesome!

    I will post more pictures as i have them...

  6. #5
    Xombie's Avatar
    Join Date
    Sep 2005
    Location
    Spanish Fort, Alabama
    Age
    34
    Posts
    30

    Re: Building my armor/gauntlets...

    I built knee armor using the wizardofflight templates and they turned out awesome. I used ABS plastic, not knowing how hard it is to shape, so they aren't perfect. I agree that JB Weld is awesome, but I have found that JB Quik is a little less stressful since it sets up faster and doesn't settle as much. Also, 2 part plastic epoxy is a great filler and it bonds to almost everything. I'll post some pics at lunch so that you can see what I mean.

  7. #6
    Real Scooby's Avatar
    Join Date
    Oct 2005
    Location
    Austria
    Age
    37
    Posts
    257

    Re: Building my armor/gauntlets...

    Nice starting point there SB. You´ve got a lot of work to do. Keep the pics coming as you progress

  8. #7
    formerly joNich
    Join Date
    Dec 2005
    Location
    Columbus, OH
    Age
    30
    Posts
    589

    Re: Building my armor/gauntlets...

    Hmm...thanks for the tip Xombie. I've been looking for a good plastic filler.

  9. #8
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    Here is the beginning of my new knee armor...



    I still need to sand (a lot) and add the side pieces, but these have a nice curve (the curve I could not get with the ****** 1st attempt)


    and I started to paint my gaintlets as well... here is the left one with a nice layer of silver...


  10. #9
    Prymer13's Avatar
    Join Date
    Apr 2003
    Location
    VIRGINIA BEACH...VA
    Age
    36
    Posts
    1,090

    Re: Building my armor/gauntlets...

    Looks good! I am a single step behind you on the WOF knees...I can't wait to get home tonight and take it further.

  11. #10
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    Quote Originally Posted by Prymer13
    Looks good! I am a single step behind you on the WOF knees...I can't wait to get home tonight and take it further.

    Yeah, me too!
    Work is really getting in the way of my costume building!

  12. #11
    InfraFett's Avatar
    Join Date
    Oct 2005
    Posts
    763

    Re: Building my armor/gauntlets...

    nice work, nice work.I'm thinking I'm going to order my knee pieces already assembled and painted. How hard were the gauntlets?

  13. #12
    I helped at SDCC '08 GCNgamer128's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, Nevada USA
    Age
    24
    Posts
    5,487

    Re: Building my armor/gauntlets...

    Where did you get those gauntlets? I thought you were going to make an ESB version, not a ROTJ

  14. #13
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    I thought about doing that - since my 1st attempt at knee armor was so ******... but I decided to give it one more try with the wizardofflight templates I was directed to on this site... so far they are coming along wonderfully. I couldn’t be happier.

    The gauntlets haven’t been to terribly difficult so far... but I haven’t started to really paint them (I think that will be the hardest part). I bought those already formed and cut the arm holes and the holes for the LEDs and switches.

    I am just so ancy to complete them!
    Its killing me!
    :p

    And I like the ROTJ gauntlets better... I kinda switched...

  15. #14
    I helped at SDCC '08 GCNgamer128's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, Nevada USA
    Age
    24
    Posts
    5,487

    Re: Building my armor/gauntlets...

    I perfer the ESB gauntlets I always thought of Boba as being green, so that's what I've been sticking with! I also like the design of Boba's flamethrower in ESB also that's the set I purchased

  16. #15
    Buckeye_01's Avatar
    Join Date
    Nov 2005
    Location
    Hartville, Oh.
    Age
    38
    Posts
    669

    Re: Building my armor/gauntlets...

    Who's gauntlets are those? That's the first set i've seen with the calc pad molded in.

  17. #16
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    PM Sent

  18. #17
    I helped at SDCC '08 MandalorFett's Avatar
    Join Date
    Nov 2005
    Location
    California USA
    Posts
    2,736

    Re: Building my armor/gauntlets...

    Quote Originally Posted by GCNgamer128
    Where did you get those gauntlets? I thought you were going to make an ESB version, not a ROTJ
    S Bits, To go ESB all you need really is a different flamethrower. Subtle but important difference. Keep up the good work, it's looking great.


    Oh yeah, and the whip cord housing is different too.

  19. #18
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    Finally added the flame thrower to the left gauntlet... didnt have time to paint it though...


  20. #19
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    I finally got to work on my chest and stomach armor... here they are all silver and ready for me to paint them...





    (dont mind the fingerprints )
    Last edited by SarlaccBits; 04-17-2006 at 12:19 PM.

  21. #20
    evan4218's Avatar
    Join Date
    Nov 2005
    Location
    Roanoke, TX
    Age
    31
    Posts
    1,789

    Re: Building my armor/gauntlets...

    Looking good

  22. #21
    formerly joNich
    Join Date
    Dec 2005
    Location
    Columbus, OH
    Age
    30
    Posts
    589

    Re: Building my armor/gauntlets...

    Hey Kim, how are those knees coming together?

  23. #22
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    The weather finally cleared and I had a chance to begin the painting on my armor!








  24. #23
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...





  25. #24
    WannaBeBoba's Avatar
    Join Date
    Jan 2006
    Location
    East Bay Area, California
    Age
    38
    Posts
    365

    Re: Building my armor/gauntlets...

    Wow!!! That's really starting to look wicked! I can't wait to see the finished product!!!!

  26. #25
    evan4218's Avatar
    Join Date
    Nov 2005
    Location
    Roanoke, TX
    Age
    31
    Posts
    1,789

    Re: Building my armor/gauntlets...

    Coming along nicely, keep up the good work!

  27. #26
    Ronin677's Avatar
    Join Date
    Oct 2005
    Location
    Norwich UK
    Age
    41
    Posts
    1,900

    Re: Building my armor/gauntlets...

    Kim

    this is all coming along really well. I love seeing other ppl's scratch built kit. Have you got any updates?

    btw is the JP scratch built or bought?

    keep going girl, you are an inspiration.

  28. #27
    cal196's Avatar
    Join Date
    Aug 2004
    Location
    Earth
    Age
    37
    Posts
    2,617

    Re: Building my armor/gauntlets...

    nice job, that looks like the same jet pack I have. The rocket is like a brick though lol.

  29. #28
    MacRory's Avatar
    Join Date
    Apr 2006
    Location
    Portland, OR
    Posts
    187

    Re: Building my armor/gauntlets...

    Wow! That's looks great! Scratchbuilt JP?

  30. #29
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    Finally some updated pictures...
    My armor is just about complete, I just need to finish weathering the collar, kidney and cod pieces.




  31. #30
    wickedbeard's Avatar
    Join Date
    Feb 2006
    Age
    42
    Posts
    676

    Re: Building my armor/gauntlets...

    looking good!!

  32. #31
    mandaloresa's Avatar
    Join Date
    Jun 2006
    Location
    Humble, Texas
    Posts
    99

    Re: Building my armor/gauntlets...

    Love the armor but it looks a little too dark. Could be the lighting though.

  33. #32
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    Yeah, its the lighting I took the picts in... my dining room isnt the best photo location!

    and Thank You!!!


  34. #33
    gaogaigar's Avatar
    Join Date
    Jan 2006
    Location
    Long Beach, California
    Age
    33
    Posts
    77

    Re: Building my armor/gauntlets...

    Excellent work Sarlaccbits!

  35. #34
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    Collar armor...



    All chest armor is now complete - just need to finish the collar and the kidney plate...

  36. #35
    Buckeye_01's Avatar
    Join Date
    Nov 2005
    Location
    Hartville, Oh.
    Age
    38
    Posts
    669

    Re: Building my armor/gauntlets...

    Looks good! I see an ear cap sitting there

  37. #36
    I helped at SDCC '08 GCNgamer128's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, Nevada USA
    Age
    24
    Posts
    5,487

    Re: Building my armor/gauntlets...

    Quote Originally Posted by SarlaccBits
    Collar armor...



    All chest armor is now complete - just need to finish the collar and the kidney plate...
    Up in the corner there it looks like you cheated and bought some knees! Keep up the good work!

  38. #37
    SarlaccBits's Avatar
    Join Date
    Jan 2006
    Location
    California
    Posts
    1,407

    Re: Building my armor/gauntlets...

    Quote Originally Posted by GCNgamer128
    Up in the corner there it looks like you cheated and bought some knees! Keep up the good work!


    I do admit that after 3 tries to make my own knees (and failing miserably) I broke down and bought an awesome set of FettPride knees. They rock! I cant wait to start painting them.

    and thank you!

    With how everythign is progressing I should have no problem getting my Fett completed for SDCC in 20 days!!!

  39. #38
    I helped at SDCC '08 GCNgamer128's Avatar
    Join Date
    Jan 2006
    Location
    Las Vegas, Nevada USA
    Age
    24
    Posts
    5,487

    Re: Building my armor/gauntlets...

    Quote Originally Posted by SarlaccBits

    I do admit that after 3 tries to make my own knees (and failing miserably) I broke down and bought an awesome set of FettPride knees. They rock! I cant wait to start painting them.

    and thank you!

    With how everythign is progressing I should have no problem getting my Fett completed for SDCC in 20 days!!!
    Don't say that! I've got so much work to do!

  40. #39
    Replicant Shadow's Avatar
    Join Date
    Jul 2005
    Location
    St. Barbara, Calif.
    Age
    42
    Posts
    1,747

    Re: Building my armor/gauntlets...

    Your Fett is gonna rock Sarlacc!

Similar Threads

  1. building my first set of armor
    By nervodxb in forum Mandalorian Armor Costumes
    Replies: 10
    Last Post: 03-12-2010, 12:18 PM
  2. My custom PCV mandalorian armor (building)
    By RC-1736 in forum Mandalorian Armor Costumes
    Replies: 3
    Last Post: 11-25-2009, 09:41 PM
  3. Building Boba's armor need design help!
    By brettman in forum Boba Fett Armor
    Replies: 4
    Last Post: 04-28-2008, 11:15 PM
  4. armor building ?'s
    By saltydog81 in forum Prop Building Workshop
    Replies: 3
    Last Post: 04-08-2008, 11:44 PM
  5. New to armor building-- got any help?
    By tooclonecrazy in forum Jango Fett Costume
    Replies: 2
    Last Post: 09-24-2007, 10:17 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18