Printable View
Hey guys! I'm working on a cardboard helmet based off of WoF's templates and Antmans tutorial and I was hoping you could help me out with a quick question. I bought a skate helmet and cut it down, but not sure if I cut it down enough? If you can tell from the picture, I would love some feedback. Its about 4" tall from the white part of the helmet.
Attachment 66574
Thanks,
Noah
Not going to use skate helmet after all, it wasn't quite the right size. There was too much of a gap between the side of the helmet and the side of the dome.
Attachment 66588
Also the shape wasn't quite right.
Attachment 66589
Going to do the "pepakura" style dome instead I guess. Wish me luck.
Attachment 66590
Good Luck! Looks good so far!
Good luck! this is a hard way you choose but with hard work, it will worth it.
Thanks guys! Might stick with the skate helmet after all. lol Started on the pepakura and wanted to cuss about 3 minutes into it:D
Guess I should have posted these pics first:
I printed WoF's templates and followed Antman's tutorial. I started with a 24" x 36" piece of matboard from Michaels and cut out the inner helmet part and the mask part and traced them onto the matboard.
Attachment 66610Attachment 66611
Then I cut out the helmet base, helmet form Rt/Lt, and helmet form Frt/Bk. Then traced them onto the matboard and cut them out.
Attachment 66612Attachment 66613
Next I put them together. (The fuzzy black kitten is crucial to this step:D) I put the dome form together before I took pictures, doh, but here it is in the picture!
Attachment 66614Attachment 66615
Here it is put together with the mask (forgot to take pics of that too).
Attachment 66616
And I cut out the mandible area from the helmet and "dry" fitted the mandibles and cheek plates. I used Antmans trick of misting the matboard down with water to make it easier to form the pieces and taped them in place until they dried.
Attachment 66617Attachment 66618Attachment 66619Attachment 66620
After they dried I glued them in and this is what I have so far.
Attachment 66621
I'm going to tackle the ear pieces next, but minus the electronics. My goal is to have a full suit done by May the 4th. My comic book store, 3rd Eye Comics, is having a May the 4th celebration. Its free comic book day and it is their 5 year anniversary so they're going to do all kinds of cool stuff.
I like the skate helmet idea. it might save you some thine down the road with fitting.
I can't take credit for it, got the idea from somebody else on here. I had to cut a section out of the middle to shorten it up, but it's working out good so far.
I've been slacking! Here is my helmet now, I have the right ear piece done I just need to attach it. I also have to do the stalk and rangefinder which I hope to have done by the end of the week.
Attachment 67092
Nice Progress!
