Where do you buy those fiberglas Boba Fett helmets?

I was wondering where do you buy those fiberglass helmets(and is there any cheap?)

watch the cargo hold here... folks are always selling something

a typical fiberglass helmet seems to range from $100 - $300 depending on where you get it from and how fancy it is. you then have to sand / paint / etc...

don't buy one on ebay unless you know the seller is a well respected tdh crafter. e.g. don't buy amiadfilter. you'll probably be dissapointed.

Wow.Has anyone made an sterling silver one.?If so how of it did you need?And do they have a mold for it?
An inquiring mind,BFett

What?

Hey,lately my signature's picture wouldn't show up.Anybody know why?
Wanna know,BFett

What do you mean WHAT.?!.?!
Mad,BFett

I think he means, why would you want a sterling silver helmet. Seems like that would be REALLY expensive.

No ones ever made a sterling silver bucket (to my knowledge) there is a maker here who makes awesome aluminium helmets, as mentioned before your best bet is to keep an eye on the cargo hold, there are always good quality helmets for sale if you check back often enough, best of luck and welcome aboard

I'd like a solid gold helmet. And a pony.

Originally Posted by Brandon Fett

Wow.Has anyone made an sterling silver one.?If so how of it did you need?And do they have a mold for it?
An inquiring mind,BFett

wow, that was wicked confusing

is that your way of saying "i thought they'd be way less than that?"

anyway, no... sterling would be a **** material... too soft

hand schaub does em in case aluminum though. mmmm, aluminum. can't WAIT to get mine!!

Ok so ya'll think its a bad idea with the sterling silver helmet..Well me think,well ya wouldn't have to paint the parts with scratches.Then again it might be too soft.Alright yall decide.If its a (worth a try) or (don't waste time on it).
You decide,BFett

This is why you start with primer, then do a metallic silver coat of paint. Mask off some scratches using masking tape, then paint over it with the color you want the helmet to be, remove the tape, then sand the edges of the scratches a bit to make it look more natural.

Or get a cold cast aluminum bucket

Originally Posted by Brandon Fett

Then again it might be too soft

i definitely think it would be too soft. silver isn't the toughest thing out there... one drop and i think your bucket would be history. not to mention the $$$ on that much silver!

cold cast or straight up aluminum would both definitely make the silver base code redundant, if that's the route you're looking to go.

OK so ya'll think its a bad idea.Hmmmm,ok fine so a how much does that aluminum helmet cost?.And does anybody know why my signature's picture won't show up?!?!?
Curious,BFett.

Oh ya,tk7602 that website named "stormtrooperguy" that you own is awesome.
A complement,BFett

Although a sterling silver helmet would have amazingly effective anti-werewolf properties, it's probably not the best way to go.

Originally Posted by Brandon Fett

OK so ya'll think its a bad idea.Hmmmm,ok fine so a how much does that aluminum helmet cost?.And does anybody know why my signature's picture won't show up?!?!?
Curious,BFett.

Brandon Fett,
Here is a thread with a lot of info about aluminum helmets.

http://www.thedentedhelmet.com/showt...-schaub+sculpt

Originally Posted by Brandon Fett

And does anybody know why my signature's picture won't show up?!?!?

Check out this thread:
http://www.thedentedhelmet.com/f33/signature-image-size-limit-468x60-pixels-13394/

If the picture is over limits, my guess is it will not be displayed.

Originally Posted by Brandon Fett

Oh ya,tk7602 that website named "stormtrooperguy" that you own is awesome.

You have found a very great site, dude!

Dang B Fett why the really chaotic posting? you dont have to act like a rabid jackalope in heat to get someone to answer your question

Brandon Fett, you need to stop being a noob. Try to clarify your questions more, and you will get clear answers.