Superjedi's Pre-Pro 1 "Eyes" helmet

superjedi

Sr Hunter
Hi all!
Man, it's been quite a while since I've started a progress thread. I'm actually kind of nervous. . . is that weird? :lol:
With everything going on the past few months I've been amazingly busy learning the ropes in my new unit and setting up our new house, but I've been wanting to tackle a new Fett project for some time now. I've always liked the looks of the PP1 helmet, the version with those cool looking eyes painted on the dome, and for my birthday this year my wife got me a Bobamaker deluxe helmet kit. She rocks! :love I ordered the "dentless" version from DAZ and it arrived yesterday (2 days from the UK to Virginia!! :eek:) and although I own many of his Boba pieces, this is my first experience with one of his helmets. The kit is just fantastic! As with all the other hard parts I've gotten from him, everything comes cut/sanded/smoothed/finished/trimmed/primed and basically ready to paint right out of the box!
Here's an overall shot of my new soon-to-be PP1 with my TerminalFettler PP3 helmet and my FPH ESB. The sizes are fairly comparable, with the FPH being a bit larger overall.

IMG_1804.JPG

Just another couple of angles of my 3 boys. :)

IMG_1805.JPGIMG_1807.JPG



Here is a shot of the kit's parts. Again, I have done nothing to the components. . . these are right outta the box.

IMG_1808.JPG

The RF parts (I have press fit them together for this pic). I had ordered the 'deluxe' RF as part of my order, and it came like this. Fully assembled, painted, with 2 non-functional red LEDs. Very nice satin black finish.

IMG_1809.JPG

Here's the circuit board part, which fits very nicely behind the keyslots.

IMG_1811.JPG

To top it all off is a well formed smoked visor.

IMG_1812.JPG

A very comprehensive kit, eh?
So I hope to have some pics soon as I begin to paint this baby! Watch this thread for more. (y)
Thanks for looking!

IMG_1804.JPG


IMG_1805.JPG


IMG_1807.JPG


IMG_1808.JPG


IMG_1809.JPG


IMG_1811.JPG


IMG_1812.JPG
 
Last edited by a moderator:
Nice to see you back in action Eric. This will be SWEET!!

I know that the ESB does, but Does the original PP1 have the "wavy" brow too?? I never noticed, Just curious...
 
Yeah, I'm looking forward to painting something that's not a wall for a change. :lol:
As far as the wavy brow goes, not sure exactly, but the reference pics show the same 3 gouges in the face (left cheek, left mandible, upper right "brow") as the ESB helmet. If the helmets were pulled from the same mold, I would think they'd share most of the same characteristics.
 
UPDATE: Nov 12th

OK, off to a good start here. :) The following pics show the first 2 stages. I first masked off the helmet except for the keyslot area and painted it with Floquil Foundation. It's a similar color to Concrete, like on the ESB helmet. Once I get all the colors on and begin to do some pastel weathering, the tone of this color will shift slightly.

Once the Foundation was dry I masked it off along with the bulk of the helmet, leaving the rear panels and right ear exposed. This was airbrushed with Polly Scale Intermediate Blue.

IMG_2087.JPGIMG_2089.JPG



As you can see in the second pic, I did not mask off my hand. :lol:

The next step will be rather time-consuming as I will have to make tracings/templates for the damage on the rear panels. This will be much trickier than working on my usual ESB paint jobs because the reference isn't nearly as comprehensive. I'll have to use what I have and try to extrapolate for the curvature of the helmet. Once I get that done, a dark green will be airbrushed on.

Speaking of colors, I just want to pause here and give a huge thank you to Ryan (Boba Phat aka Mojoday) who took the time through many PMs and emails to give me some invaluable input on the PP1 color scheme. He even went so far as to send me a color chip of an unusual Floquil color.
Thanks, Ryan! (y)
 
Last edited by a moderator:
Definitely going to be watching this one with a LOT of interest!!! I still have my "ears" helmet sitting here and needing a paint job!
 
Yeah! More Pre-Pro fans! :)

UPDATE #2: Nov 12th

Moving right along here. Got the damage areas traced out and applied some W/N masking fluid to the areas to remain Intermediate Blue. Sprayed on some Polly Scale CNW Green. This is a very "rich" looking green compared to what I'm used to on the ESB, but it looks great.
Here it is freshly sprayed. Gotta give it a few more hours to unmask. (y)
Sorry for the picture quality. It's dark here now and I only have one ceiling light in the hobby room. Don't want to use the flash as it will blow everything out.

IMG_2090.JPGIMG_2091.JPG

Hope the masking fluid did its job! I'll post pics later when it's all removed.
 
Last edited by a moderator:
Man, what a crazy storm we've been having! Lots of people around the Hampton Roads area have suffered storm damage and are without power. We had our power flicker a couple of times last night, but it never went out.

UPDATE: Nov 13th

I actually did this last night, but it was late and didn't snap the pics till this morning.
Took a handy rubber cement eraser and went over the masking fluid on the rear panels. It rolled off pretty well to reveal the Intermediate Blue. I'm happy with the results. :)
Here are 2 shots.

IMG_2107.JPGIMG_2108.JPG

Now here's a pic comparing the right panel with one of the only four reference pics I used to lay out the damage patterns. I'm not a huge photography expert, but I tried to match angles as best I could.
Pretty close? Still a little tweaking to do, and I need to add some silver chips, too.

IMG_2094.JPG

Next up: spraying the base color for the dome and lower cheeks!
 
Last edited by a moderator:
Hey, uh, are you EVER going to get started on this helmet, or what?.....

j/k I can't believe how much you accomplished just yesterday. Actually just woke Mando_pirate up to show her! lol Looks sick, man! :)
 
Yeah, I kinda get all amped up when I have a new project to work on. :lol: We were off work yesterday due to the storm so i had some time to work on it, too.

MM, so far the colors I've used are: Floquil Foundation (keyslots), Polly Scale Intermediate Blue (rear panels--light), Polly Scale CNW Green (rear panels--dark).
I always like to post the colors I use, so as I progress they'll be listed in the text.
 
Looks fantastic so far! I'm glad that my color suggestions are working out. The CNW really makes the Foundation take on yellowish hue that it needs. I think we might have nailed this paint job!

-Ryan
 
. . .I think we might have nailed this paint job!

-Ryan

Well, as long as you replace the "we" with "you!" Your color knowledge is really invaluable. (y)

UPDATE: Nov 13th

Looking a little more colorful now! Got the dome and lower cheeks done. This was one of those colors I went back and forth with many times. As I just mentioned, Ryan was a tremendous help in narrowing down the choices. What I went with was Polly Scale RLM 78 Lt. Blue. As military modelers may know, RLM colors are Luftwaffe colors.

IMG_2120.JPGIMG_2121.JPG

Since this is by no means a pristine helmet, I decided to slightly tone down the RLM 78 with Polly Scale RLM 65. This is pretty similar to the RLM 78 but with a more grayish cast to it. I just misted it on unevenly. I think it gives a very slight oxidized look to the base color. It's hard to even see in these pics.

IMG_2115.JPGIMG_2118.JPG



It sure was strange airbrushing this color onto the helmet! :lol:
More to come.
 
Last edited by a moderator:
sooooooo when you wanna paint this BM bucket I got ESB,,Hmmmmmmmmmmmmm???

ohhhh yeah so far the paint job looks ( . Y . )'s,,hee hee
 
Thanks for the credit, Eric. But all my crazy color ideas are just theory till you actually use them. And I'm still a long way off from having anything ready to paint myself!

-Ryan
 
This thread is more than 5 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top