Superjedi's Joe Johnston Concept "Eyeball" Fett helmet

it was nice to see a concept drawing brought to life, thanks for sharing it.
even better to see it with visor and as you put it, "less cluttered background" to have a good view of it.
 
Last edited by a moderator:
Just realized that you named this project as 'McQuarrie Concept' when the drawing is a Johnston one (No. 10):

Artof-01.jpg

(Note: some of the images were flipped, this is why the rangefinder is on the left and not on the right side.)

The image explanation was taken from the other page just to show who draw what, but even the styles are different between McQuarrie and Johnston.

I hope I didn't sound out of place or something.

Artof-01.jpg
 
Last edited by a moderator:
Thanks, Raf! Didn't realize this was a Joe Johnston sketch. :facepalm

Changed the thread title. . . I think.
 
Last edited by a moderator:
Thanks again! My visor has been shipped. Hopefully it'll be here by the end of the week.

Great build, cleaver using the Darth Vader Tie fighter kit part.

I was hoping someone would notice what it was! (y) I've had bits of that
kit in my spares box for over a decade. Finally found an interesting use for part of it.
 
Thanks again! My visor has been shipped. Hopefully it'll be here by the end of the week.



I was hoping someone would notice what it was! (y) I've had bits of that
kit in my spares box for over a decade. Finally found an interesting use for part of it.

I really love seeing works like this. You've done very good, as you always do!

That said, I am looking forward to seeing a visor installed. And better pics! You have access to a MUCH nicer camera!

...AND an actual background. I love Frasier, but I can't stomach Friends. Handle it lol!
 
Thanks, all! I received the visor a while back, but I was working on a commission so
I put this helmet on the back burner. I finally had a chance to install it, so here are
some finished pics!

IMG_0888_zps8a1500a2.jpg


I went with a standard shade 3 welding visor for this project.

IMG_0894_zpsc69e6ebe.jpg


Here are a couple of angles of the back.

IMG_0890_zps5eba7733.jpg


IMG_0892_zps78496642.jpg


Two closer shots to show some of the multi-layer weathering.

IMG_0889_zps90a4c3d7.jpg


IMG_0895_zps04802452.jpg


This was a really interesting side project. I'm a big fan of the concept artwork from the OT
and I had a lot of fun bringing one of those concept sketches into the 3D world. :)

This helmet doesn't really fit in with the rest of my collection though, and I'm going to offer
it up to a good home in the Cargo Hold. If you're interested, look for the FS post. (y)

Thanks to everyone who followed along with the build!
 
Thanks, all! I received the visor a while back, but I was working on a commission so
I put this helmet on the back burner. I finally had a chance to install it, so here are
some finished pics!

...

This helmet doesn't really fit in with the rest of my collection though, and I'm going to offer
it up to a good home in the Cargo Hold. If you're interested, look for the FS post. (y)

Thanks to everyone who followed along with the build!

Awesome work!

Sent from my HTC One
 
This thread is more than 10 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top