Page 1 of 2 12 LastLast

Sancho Bucket build up progress

  1. #1
    evan4218's Avatar
    Member Since
    Nov 2005
    From
    Roanoke, TX
    Posts
    1,789

    Sancho Bucket build up progress

    Hi everyone, its about time to start a new bucket. This one is a comission job for our newbie, Sancho. I will post my progress as I go and what I do for all to see. I will be using custom stencils that I have been working on for accuracy. I have a feeling this bucket will be twice what my last one was.

    A couple of new things I will be doing on this one. I will be using the rare earth magnets on the earcap, this is the ultamate solution if you want to change out your RF stalk.

    I will also be using a decal system for the RF Earcap rather then the hand painted one that I did for my last.

    First off, I have it sanded and primed and finished up my silver coats last night. I am now ready to sketch on my stencils. This will be tedious but fun. I will be applying the grey, reds, and every major scrach with the stencil. The only one I can think of that cant be done that way is the feathered looking scratch that is at the back center of the helmet above the keyholes. That has to be done with a brush.

    Well, enjoy and keep coming back and checking, there will be lots of updates!
    Attached Thumbnails Attached Thumbnails fett-build-up-002-jpg   fett-build-up-003-jpg   fett-build-up-004-jpg  

    fett-build-up-005-jpg  

  2. #2
    SlaveR5's Avatar
    Member Since
    Nov 2005
    From
    Irvine, CA
    Posts
    354

    Re: Sancho Bucket build up progress

    do you use grey or black primer? looking smooth so far :-) im going to use templates as well on mine.

  3. #3
    Buckeye_01's Avatar
    Member Since
    Nov 2005
    From
    Hartville, Oh.
    Posts
    669

    Re: Sancho Bucket build up progress

    Is that an SG bucket? It looks like it. Thanks for the email Evan!

  4. #4
    SarlaccBits's Avatar
    Member Since
    Jan 2006
    From
    California
    Posts
    1,409

    Re: Sancho Bucket build up progress

    so shiny...

  5. #5
    evan4218's Avatar
    Member Since
    Nov 2005
    From
    Roanoke, TX
    Posts
    1,789

    Re: Sancho Bucket build up progress

    It is indeed a SGB bucket. I spent the day creating my scratch temps for the left side of the face (The hemets right) and traced them on. Tonight I will continue my progress. I am only going to use the stencils for the main detail scraches. I.E. the main silver parts, the mail grey and red.. and lets not forget the back... I will post a printable version of my stencils once I scan them in on this thread so be on the look out for this.

    I will post updated pics of the progress tomarrow night.

  6. #6
    evan4218's Avatar
    Member Since
    Nov 2005
    From
    Roanoke, TX
    Posts
    1,789

    Re: Sancho Bucket build up progress

    Here are some early pics I took sunday night while I was penciling on the stencils. Hopefully they show up witht he flash.

    EDIT- Sadly the fash dose take more than half of it away! Bastard!!! Oh well, you get the idea... painstakingly cut out stencils then draw the main scrach and add the little details !
    Attached Thumbnails Attached Thumbnails week-1-jpg  

  7. #7
    SlaveR5's Avatar
    Member Since
    Nov 2005
    From
    Irvine, CA
    Posts
    354

    Re: Sancho Bucket build up progress

    evan4218... looking good. ? - do you use black or grey primer?

    thanks

  8. #8
    evan4218's Avatar
    Member Since
    Nov 2005
    From
    Roanoke, TX
    Posts
    1,789

    Re: Sancho Bucket build up progress

    I used greay, and model masters chrome for the silver... To me it dulls out just a bit after clearcaoting it before I start drawing my stencil for masking but by testing it with a flash camera (the best way to see if you paits look like the real deal) that seems to get my silver the closest to screen accurate I can get.
    Attached Thumbnails Attached Thumbnails week-1_2-jpg  

  9. #9
    evan4218's Avatar
    Member Since
    Nov 2005
    From
    Roanoke, TX
    Posts
    1,789

    Re: Sancho Bucket build up progress

    I have applyed the dome green, Here are some pics of the silver revealed from the masking.
    Attached Thumbnails Attached Thumbnails fett-build-up-010-jpg  

  10. #10
    DarthMiller's Avatar
    Member Since
    Jun 2005
    From
    Ft. Worth, TX
    Posts
    1,194

    Re: Sancho Bucket build up progress

    hey buddy...We thought you were at work today?? me Alex and Eric are still at my house....come on over!!! ...the strippers just left!!



    evan4218 said:
    I have applyed the dome green, Here are some pics of the silver revealed from the masking.

  11. #11
    DarthMiller's Avatar
    Member Since
    Jun 2005
    From
    Ft. Worth, TX
    Posts
    1,194

    Re: Sancho Bucket build up progress

    the strippers are back!!

  12. #12
    sancho's Avatar
    Member Since
    Feb 2006
    From
    Round Rock, TX
    Posts
    40

    Re: Sancho Bucket build up progress

    bump s

  13. #13
    sancho's Avatar
    Member Since
    Feb 2006
    From
    Round Rock, TX
    Posts
    40

    Re: Sancho Bucket build up progress

    bump so

  14. #14
    sancho's Avatar
    Member Since
    Feb 2006
    From
    Round Rock, TX
    Posts
    40

    Re: Sancho Bucket build up progress

    bump back up

  15. #15
    sancho's Avatar
    Member Since
    Feb 2006
    From
    Round Rock, TX
    Posts
    40

    Re: Sancho Bucket build up progress

    It would appear that I'm having technical difficulties

  16. #16
    CombatBaby's Avatar
    Member Since
    Jul 2005
    From
    The miserable mill
    Posts
    2,325

    Re: Sancho Bucket build up progress

    apparently..

    the helmet looks good

    -=QuinN!

  17. #17
    evan4218's Avatar
    Member Since
    Nov 2005
    From
    Roanoke, TX
    Posts
    1,789

    Re: Sancho Bucket build up progress

    As promised to Sancho here is an update. I now have most of the dome and cheeks main details done. They have the SP Lark Gray around the scratches so things are moving well. I am going to go back with a fresh eye and ref pics to make sure I didnt miss any small silver peices. (The main sratch details that further the weathering will be added with a colored pencil once all main detail for the helmet is done!)

    The main silver sraches were done with stencils I cut my self, the gray was done by hand.

    The helmet is still lacking a few silver scratches on the back and one on the top... then the green is done!

    Next I will do the upper cheeks and the back. I am saving the red for last.
    Attached Thumbnails Attached Thumbnails domeprogress1-jpg   cheekprogress1-jpg   cheekprogress2-jpg  

    domeprogress2-jpg  

  18. #18
    DarthMiller's Avatar
    Member Since
    Jun 2005
    From
    Ft. Worth, TX
    Posts
    1,194

    Re: Sancho Bucket build up progress

    looking good!!

  19. #19
    sancho's Avatar
    Member Since
    Feb 2006
    From
    Round Rock, TX
    Posts
    40

    Re: Sancho Bucket build up progress

    Lookin great!!! :thumbup

  20. #20
    evan4218's Avatar
    Member Since
    Nov 2005
    From
    Roanoke, TX
    Posts
    1,789

    Re: Sancho Bucket build up progress

    Pics of these buckets never do them justice. I will post some pics in natural light out side of the bucket once a bit more is done.

    I did quite a bit more on monday! I will get some pics of that up soon.

  21. #21
    evan4218's Avatar
    Member Since
    Nov 2005
    From
    Roanoke, TX
    Posts
    1,789

    Re: Sancho Bucket build up progress

    Here are some great update pics, I have gotten all of the cheeks done, all of the detailing and dirt blents on the dome, and cheeks, all of the scratches done on the cheeks and dome... minus the one that goes into the killstripes, I alwas like to do that at the same time as the killstripes so that I know thwy line up correctly, call it paranoia.

    I will be doing the kill stripes monday with that final scrach and move on tot he back and the red parts.... I will fit in there somewhere my magnet instilation system. Then decal the ears and such... and install visor... and I am home free.

    Enjoy the pics... these were taken outside in natural light as promiced. 8)
    Attached Thumbnails Attached Thumbnails right-4-2-06-jpg   right2-4-2-06-jpg   top-4-2-06-jpg  

    front-4-2-06-jpg   back-4-2-06-jpg   left-4-2-06-jpg  


  22. #22
    Jango_Fett_Jr's Avatar
    Member Since
    May 2002
    From
    St. Catharines, ON
    Posts
    1,957

    Re: Sancho Bucket build up progress

    Looking good so far!

  23. #23
    Buckeye_01's Avatar
    Member Since
    Nov 2005
    From
    Hartville, Oh.
    Posts
    669

    Re: Sancho Bucket build up progress

    Very nice evan! Keep up the good work. I wish AFFO$ would post some progress pics of mine.

  24. #24
    evan4218's Avatar
    Member Since
    Nov 2005
    From
    Roanoke, TX
    Posts
    1,789

    Re: Sancho Bucket build up progress

    Here is a quick update using my revised killstripe template. Enjoy
    Attached Thumbnails Attached Thumbnails killstripe-4-3-06-jpg  

  25. #25
    evan4218's Avatar
    Member Since
    Nov 2005
    From
    Roanoke, TX
    Posts
    1,789

    Re: Sancho Bucket build up progress

    Here is an update of what I have been up to in the past week and a half other then easter and talking care of a nine month pregnant wife.

    I have the long ear attached and painted, still needs some weathering and the decal. I have about 75-80% of the detailing on the mandables done. I am fairly happy with how they turned out. I have installed the MS inspired magnet system into the ear! (If your wondering why its attached without an RF antena thats why, its not glued. LOL) I love magnets!!!

    The other lower ear peice is painted and weathered, just needs to be glued on. Then two coats on the back and some weathering and done!!!
    Attached Thumbnails Attached Thumbnails mandables_4_18-jpg   mandables2_4_18-jpg   mandables3_4_18-jpg  


Similar Threads

  1. TCW scratch build bucket
    By Fierfek in forum Star Wars Costumes
    Replies: 6
    Last Post: Jun 1, 2010, 5:45 PM
  2. WiP: First Scratch Build Bucket
    By 6thdvcptn in forum Boba Fett Helmet
    Replies: 9
    Last Post: Mar 11, 2009, 9:04 PM
  3. JD bucket build
    By Cruzer in forum Expanded Universe Bounty Hunters
    Replies: 8
    Last Post: Jul 30, 2006, 1:57 AM
  4. My BM lid build up progress
    By mandalore697 in forum Boba Fett Helmet
    Replies: 29
    Last Post: Jan 30, 2006, 10:29 AM
  5. Build your own bucket MLC pic tutorial
    By Han Hunter in forum Boba Fett Helmet
    Replies: 44
    Last Post: Jan 8, 2005, 9:06 AM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •