1. NOITAIDAR's Avatar
    Member Since
    May 2005
    May 15, 2007, 7:59 AM - Rangefinder Servo help #1

    Hi all,

    I'm currently upgrading my Jango with a BKBT bucket, and movable rangefinder. I have been trying to get my head round the R/C setup for my flamethrower buttons, and currently have it transmitting and recieving well. The problem lies with the servo itself.

    I bought a cheapo R/C car in Argos, and took it apart, it has a green and a yellow wire coming out of it, which attached to the car's little motor. Now, How do I attach that to a Servo to get a bit more torque on my RF. As far as I know, the reciever board sends DC out to the motors, but the Servos require some kind of pulse via the white wire. How do I generate this?

    I'm trying to get this all sorted before I leave for C4 on the 22nd. If anyone can help, I'd appreciate a PM or Skype(jangobritt) convo.

    Cheers guys.

    Last edited by NOITAIDAR; Mar 26, 2010 at 10:45 AM.
  2. Become a member for 90 days and create 50 posts and you won't see these ads.Register now!
  3. NOITAIDAR's Avatar
    Member Since
    May 2005
    May 15, 2007, 12:49 PM - Re: Rangefinder Servo help #2

    OK, I figured that part out, I just took the electronics out of the servo and attached the reciever wires right to the high torque motor. Works like a charm. Now the problem lies with affixxing the Rangefinder Arm to the Servo. I have a couple servo horns that I'm cannibalising, but none of them seem deep enough to fill the hole in the RF, and cover the servo cog.

    Anyone have any suggestions?

  4. tubachris85x's Avatar
    Member Since
    Mar 2006
    May 15, 2007, 2:12 PM - Re: Rangefinder Servo help #3

    What I would suggest, is that your going to have to ether extend the servo horns from the servo itself, or from the actual RF stalk. I originally had the servo thing ready for my bucket, but I still need to get a servo control chip to creat the pulses needed to make the servo work.

    But just extend the servo horns, its probably best to do it from the stalk, and try to push the srvo motor as close as possible. I remember learning this from gatorfett awhile back, see if you can search for it.

  5. Member Since
    May 2006
    May 15, 2007, 5:14 PM - Re: Rangefinder Servo help #4

    I used a servo saver epoxied to the stalk to extend the reach. The hole in the helmet/ear piece had to be enlarged but it gave me the needed reach for the servo.

Similar Threads

  1. Rigging a HD rangefinder servo to your helmet
    By Jimmy BufFETT in forum Boba Fett Helmet
    Replies: 26
    Last Post: Jul 8, 2016, 9:34 PM
  2. servo
    By teabo in forum Boba Fett Helmet
    Replies: 4
    Last Post: Mar 21, 2009, 5:22 PM
  3. Fett SERVO HELP !!
    By Lucksy31 in forum Boba Fett Helmet
    Replies: 6
    Last Post: Sep 17, 2007, 12:31 PM
  4. Need Servo help
    By bobafett669 in forum Boba Fett Helmet
    Replies: 8
    Last Post: Oct 23, 2005, 10:06 PM
  5. RC RF servo help!!!!!
    By thksdad in forum Boba Fett Helmet
    Replies: 7
    Last Post: Jan 15, 2005, 12:20 PM