Subscribe
  1. Jango_Fett_Jr's Avatar
    Member Since
    May 2002
    Posts
    1,957
    Aug 15, 2004, 5:28 PM - Quick resin warping question #1

    I left my M_S helmet in a car in a hot day for no more than 10 minutes, I come back and the resin rangefinder is bent about 50 degrees inward.

    I was just going to heat it up with a heatgun and bend it, but I just wanted to know if there are any precautions I should take...I've never tried heating resin before.

    Thanks.
  2. MARROW SUN's Avatar
    Member Since
    May 2004
    Posts
    608
    Aug 15, 2004, 5:59 PM - Re: Quick resin warping question #2

    Hey JFJ sorry to hear your RF bent , you might want to try a blowdryer first, I think the heat gun might be a bit too much.
  3. E2K13's Avatar
    Member Since
    Apr 2004
    Posts
    1,501
    Aug 15, 2004, 10:25 PM - Re: Quick resin warping question #3

    You could use a blowdryer or get yourself an aluminum RF. LOL
  4. mobius's Avatar
    Member Since
    Aug 2003
    Posts
    424
    Aug 16, 2004, 4:35 AM - Re: Quick resin warping question #4

    The rangefinder stalk that came with my MSH2 always bend inwards and was very bendable so I bought a steel rod 3mm, then I used my dremel and made a groove from the top to the bottom. I used fiberglass to secure the rod in place and sanded the excess fiberglass of and painted it again it worked wonders it is very strong now. But not that heavy I got the servo to lift it up and down. But I do not recomend a small servo cause the clogwheels are so fragile that they break.
  5. Aug 31, 2004, 8:43 PM - Re: Quick resin warping question #5

    I know this is kinda off, but what is a MSH2
    can someone send me a pm...?
  6. Jango_Fett_Jr's Avatar
    Member Since
    May 2002
    Posts
    1,957
    Aug 31, 2004, 9:23 PM - Re: Quick resin warping question #6

    I think you'll find that if you make use of the SEARCH feature you will find oodles of threads about the MSH2, including on just a few threads below this one.

Similar Threads

  1. Quick advice needed on resin bucket!
    By gymbeau2000 in forum Expanded Universe Bounty Hunters
    Replies: 3
    Last Post: Nov 3, 2009, 3:29 AM
  2. quick question
    By erock8100 in forum The Sarlacc Pit
    Replies: 2
    Last Post: Jan 15, 2009, 8:05 PM
  3. A quick question????
    By loveless in forum Boba Fett Helmet
    Replies: 14
    Last Post: Nov 26, 2007, 1:49 PM
  4. so quick question
    By morpheus1977 in forum Expanded Universe Bounty Hunters
    Replies: 9
    Last Post: Oct 25, 2006, 6:36 AM
  5. Quick Question
    By Boba Fett in forum Boba Fett Helmet
    Replies: 2
    Last Post: Jun 10, 2006, 8:07 PM