Alright folks, I know there are at on of posts buried throughout this forum on what technique everyone might want to use etc but I'm making one that I can bookmark and recall with ease. My bucket should be arriving this week and as everyone who has been involved with it knows, I'm anxious to get at it soooooooo here is what I was thinking.
Step 1: Cut out the visor T and sand it nice and smooth
Step 2: Primer coating the entire exterior of bucket
Step 3: Chrome the entire exterior of bucket
Step 4: Paint the main green on the bucket. Wait till it dries
Step 5: Add scratches with steel wool pad?
Step 6: Paint red mandibles and repeat above step with steel wool pad?
Step 7: Paint the cheek sections and repeat the above steps with steel wool pad?
Step 8: Add finishing touchs with touch up paint (silver and grey)
Step 9: Add a flat clear coat to exterior to protect artwork?
Now, is this how its done folks? If not what were YOUR methods, tools, trick etc.
I'm compiling a complete manual to work in conjunction with the various Rogue Studio paint guidelines etc and will document my own buckets transformation.
Regards,
OK
Step 1: Cut out the visor T and sand it nice and smooth
Step 2: Primer coating the entire exterior of bucket
Step 3: Chrome the entire exterior of bucket
Step 4: Paint the main green on the bucket. Wait till it dries
Step 5: Add scratches with steel wool pad?
Step 6: Paint red mandibles and repeat above step with steel wool pad?
Step 7: Paint the cheek sections and repeat the above steps with steel wool pad?
Step 8: Add finishing touchs with touch up paint (silver and grey)
Step 9: Add a flat clear coat to exterior to protect artwork?
Now, is this how its done folks? If not what were YOUR methods, tools, trick etc.
I'm compiling a complete manual to work in conjunction with the various Rogue Studio paint guidelines etc and will document my own buckets transformation.
Regards,
OK