Subscribe
  1. Firespray's Avatar
    Member Since
    Jun 2005
    Posts
    48
    Jun 7, 2005, 5:26 PM - Newbie Intro & Question #1

    Hi all. My name is Kent. I've been visiting your forum for awhile now and decided it's time to join in. At this point I'm more of a Star Wars helmet collector than a full costumer. I purchased a Mystery Helmet kit over a year ago about the same time my wife and I had our first child. Needless to say I am just now finding the time to work on it again. I ordered an aluminum rangefinder mast from a fellow member and purchased some paint last weekend.

    The paint I purchased is Testors Model Master Acryl colors and one bottle of Pollyscale which is also an Acrylic paint. I was going to purchase some Floquil paint colors also but realized that Floquil is an enamel paint. Here's my question. Can I paint enamel over an acrylic or vice versa or is the paint going to have some sort of bad reaction? Should I return the paint I have now and purchase all Floquil?

    Thanks!
    Kent
  2. Prymer13's Avatar
    Member Since
    Apr 2003
    Posts
    1,090
    Jun 7, 2005, 7:23 PM - Re: Newbie Intro & Question #2

    I have been told that when layering paint you can put water based paints(acrylic) OVER lacqer based paints (Enamel), but never the other way around.

    I myself have used a lacquer based PRYMER and am in the begining stages of using Acrylic paints over it. I'll keep you posted on how it goes.

    BTW: Great handle! And welcome aboard!
  3. FrankFett's Avatar
    Member Since
    Jun 2005
    Posts
    182
    Jun 7, 2005, 10:12 PM - Re: Newbie Intro & Question #3

    Well I dont want to start a new post just to introduce myself so I will just throw my introduction in on this post. I am new to the fine hobby of costuming and recently created my first Star Wars costume, Jedi robes. I attended C3 in my Jedi robes and saw all of the wonderfully screen acurate, "hard" costumes like stormtroopers and the Fetts. I was amazed at the detail of many of these costumes and I was intrigued to create my own. A few days ago I ordered a "Mystery" sized Boba Fett helmet and can't wait to get started on this awesome character. Have patience with me guys, because I am sure I am going to have a lot of questions! Thanks!
  4. Admin Staff webchief's Avatar
    Member Since
    Mar 2002
    Posts
    4,703
    Jun 8, 2005, 7:58 AM - Re: Newbie Intro & Question #4

    Welcome to the both of you!
  5. Jedi-Bob's Avatar
    Member Since
    Mar 2002
    Posts
    1,570
    Jun 8, 2005, 10:07 AM - Re: Newbie Intro & Question #5

    Welcome to the group, fellas.
  6. Son of Knight's Avatar
    Member Since
    Jun 2005
    Posts
    19
    Jun 8, 2005, 4:28 PM - Re: Newbie Intro & Question #6

    I'm also a newbie (I just joined today) and I also have a question. I bought a Rubies helmet off ebay (haven't gotten it yet). I've heard though other posts that it would probably be too small for somone of my size. Now, I have more elbow greese in me than money. Is it posible to make a new helmet from the rubies one? Perhaps casting a new one from it? How do you guys who make them from scratch get started?
  7. T-Bone's Avatar
    Member Since
    Jun 2003
    Posts
    965
    Jun 9, 2005, 2:29 AM - Re: Newbie Intro & Question #7

    Well...I haven't built a full-sized bucket from scratch yet, but I do have plenty of pics in my thread on how I built my kid-sized one - http://www.thedentedhelmet.com/showthread.php?t=5031

    If you have a large-sized head, I would probably start with a base helmet that fits comfortably. If you use a procedure similar to mine, keep trying it on throught the creation process to make sure it will fit.

    Welcome a board!
  8. Member Since
    Jun 2004
    Posts
    95
    Jun 9, 2005, 2:29 AM - Re: Newbie Intro & Question #8

    Quote Son of Knight said:
    I'm also a newbie (I just joined today) and I also have a question. I bought a Rubies helmet off ebay (haven't gotten it yet). I've heard though other posts that it would probably be too small for somone of my size. Now, I have more elbow greese in me than money. Is it posible to make a new helmet from the rubies one? Perhaps casting a new one from it? How do you guys who make them from scratch get started?
    Welcome to the board, all you guys. If you want to cast a helmet you would need to sculpt one. If you cast your rubies helmet you'll just end up with the same thing. Try your rubies, it might fit. It may not be proportional, but it will be better than nothing. You can save your money and get a new helmet later. If you have the skill to sculpt go fot it. There are also threads on here about scratch built helmets. Use the search feature, there is a wealth of knowledge on here.

Similar Threads

  1. Newbie helmet question
    By Sirius_Cruger in forum Boba Fett Helmet
    Replies: 3
    Last Post: Dec 11, 2009, 6:02 PM
  2. Total newbie question
    By marshall2288 in forum Boba Fett Costume
    Replies: 2
    Last Post: Oct 4, 2009, 6:41 PM
  3. New Armor Question/Intro
    By AncientFett in forum The Sarlacc Pit
    Replies: 5
    Last Post: Mar 14, 2008, 1:06 AM
  4. Newbie question..NEED HELP!!!
    By darthmikec in forum Boba Fett Costume
    Replies: 4
    Last Post: Oct 3, 2005, 12:29 PM
  5. Newbie Intro and Request
    By womo68 in forum Boba Fett Helmet
    Replies: 14
    Last Post: May 7, 2005, 11:20 AM