Mystery Helmet Kit- ANNOUNCEMENT last post.

if you haven,t sold both of these let me know of course boba not jango if you have please let me know when you get another boba made thanks much
 
Last edited by a moderator:

slave1117a wrote:

if you haven,t sold both of these let me know of course boba not jango if you have please let me know when you get another boba made thanks much

Slave1117a, he only has Boba, the Jango is made from the Boba like I did with mine.
Lynn
 
Last edited by a moderator:
I have to say, these helmets are awesome. Absolutly perfect for ROTJ, I recommend Sarge to anyone. Will post pics of mine in a week or two when I'm done painting.
 
Last edited by a moderator:

Bountys Hunted wrote:

Sarge, how difficult would it be to add more ESB flair?

I roughly measured the widths of both my Mystery helmet and my Movie size helmet and they are only about 3/8 to 1/2 of and inch off from each other (mostly because of ear width), you add more flair and Sarges won't look too good.
 
Last edited by a moderator:
Lynn, can you post side-by-side pics of both of them; one straight on and another of the profile? Thanks.
 
Last edited by a moderator:

Bountys Hunted wrote:

Sarge, how difficult would it be to add more ESB flair?

Well, it's pretty flared already- gotta remember, when you put the earpieces on, you're going to gain about 1/2" width on either side.
But, if you still want to do more, you could heat the helmet up with a hairdryer or heat gun, and maybe place a piece of wood or something, cut to the desired length, in between the flat, ear spaces till it cooled.

-Sarge
 
Last edited by a moderator:

Lynn TXP 0369 wrote:

I roughly measured the widths of both my Mystery helmet and my Movie size helmet and they are only about 3/8 to 1/2 of and inch off from each other (mostly because of ear width), you add more flair and Sarges won't look too good.

Hey Lynn- didn't you have comparison pics between your MH and a DP deluxe? Feel free to post 'em!

Also, anyone who's got one of these so far, please, feel free to post progress pics! I want to see how my babies are doing!

-Sarge
 
Last edited by a moderator:
Here is my move size helmet comared to the mystery helmet.
ViewImage.dll

ViewImage.dll

ViewImage.dll

ViewImage.dll

It is not that much smaller then the move size helmet, it is bigger than a GF helmet and DLX.
You wouldn't want it any more flared and it is comarabe to the movie size helmets flare.
It is really one SWEET helmet guys....... You won't find many nicer.
Lynn
 
Last edited by a moderator:
I Just got mine today and my GOD ITS PERFECT THANKS SO MUCH SARGE YOU ARE THE MAN !~!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
Last edited by a moderator:

Tim Allen wrote:

lets see that ESB
I'll try to get pics of what's done so far ASAP- After all this, I still haven't gotten around to getting a charger and battery for my digicam, but next time I go to the shop, I'll see if the owner can snap some pics for me. It still needs the kill stripes, and some zinc chromate splattered on, and the visor and RF mounted, but looks pretty good as is.

[UPDATE] Two are shipping out tomorrow or Tuesday for those waiting, and the resin for the next batch is finally on it's way. PM me with any other questions.

Thanks!

-Sarge
 
Last edited by a moderator:
This thread is more than 21 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top