MY MS2

Tension113

Hunter

• May 8, 2005

• #41

Well I've been checking these forums out for quite awhile now and figured I should just register allready.. but anyway..

You couldn't have started this thread at a better time for me, since I'm getting ready to paint my Bobamaker Helm.. Looking forward to the updates.. This should help out alot..

Lookin nice so far.. Although I did kinda like that Chrome look.

Tension

 

S

Spideyfett

Well-Known Hunter

• May 8, 2005

• #42

After removing the Masked Area I found that some of the panzer green lifted:cry .
Mistakes happen....Learn from them I say.

SO rather than remask for the lower cheeks I just decided to paint them by hand....YES by hand.

I use a Grayish Black mix....More to my liking.....Not to dark and not to light..
I try to stay very close to the Ref Photos...all the one's I've seen look really DARK GRIMY GRAY....HINT HINT .

Rogue Studios calls for a "* PRR Green (Inside cheeks)" (Looks DARK), that works good too.

 

Last edited by a moderator: Aug 2, 2017

Got Maul

Well-Known Hunter

• May 8, 2005

• #43

the lifting happened around the WHOLE crown of my blasted helmet, so don't feel alone. I painted by hand a thin layer first. I waited until that dried then came at it again, for about four layers (waiting in between to dry). After the washes, you don't even know its there and that's even with my OWN eye !

 

S

Spideyfett

Well-Known Hunter

• May 9, 2005

• #44

OOPS..... ...I forgot to take pictures of the "Masked" Red Mandibles....
Just mask as I did the green and spray at least 2 Coats of Box Car Red. I like to Darken it up a little then Spay a Mist Color of the Box Car RED Color straight from the bottle... as per the HIGH RES REF Photos..

Any hoo...I started to Remove some of the Masking Fluid... **THIS STAGE CAN GET VERY MESSY.
I USE A RUBBER CEMENT PICK UP.( It's the Ugly thing I'm holding)
:angry :angry Right away I started to Lift more than just the masked areas....(I've Highlighted the main areas I MESSED-up on)...:cry :cry
Then the rest of the pics show where I fixed them by Hand painting.

I then, as stated earlier, MISTED (sp) with the lighter tone of red....I USED AN AIR-BRUSH FOR THIS PART....My air Brush gets really tight and small, so not to get on the other painted areas...

 

Last edited by a moderator: Aug 2, 2017

DreadPirateRoberts

Active Hunter

• May 9, 2005

• #45

Awesome job SPidey, it;s comming along nicely.Due to my total lack of artistic talent I had a fellow member ( thanks AFFo$s ) do a bang up ESB job for me. heres a few snaps of my MS2

The FINAL product

 

BobaFettSlave1

Active Hunter

• May 9, 2005

• #46

cool AFFOD can do a comparison of the MS2 and MS. mine is the one next to yours

 

MARROW SUN

Active Hunter

• May 9, 2005

• #47

Looks great, now I've seen both the ESB and ROTJ themes completed. Now get that visor in place!

 

DreadPirateRoberts

Active Hunter

• May 9, 2005

• #48

MARROW SUN said:

Looks great, now I've seen both the ESB and ROTJ themes completed. Now get that visor in place!

Click to expand...

SIR , YES SIR !!!!......
Ive been in contact with BobaMaker in regards to one

 

DreadPirateRoberts

Active Hunter

• May 9, 2005

• #49

BobaFettSlave_1 said:

cool AFFOD can do a comparison of the MS2 and MS. mine is the one next to yours

Click to expand...

Niiiiiiice :cheers. $'s sent me a comparison shot just the other week. my fat head will fit nice with a hardhat liner or something.

 

S

Spideyfett

Well-Known Hunter

• May 12, 2005

• #50

Once I paint the Green I tend to get bored so I start painting some of the Detail Scratches....Mainly the "GRAY Scratches".....
I paint these TOPICALLY with a ZERO Sized Sable Brush...It gives me the different Gray thickness I'm looking for on each Scratch.
I like to Copy straight from the REF Photos, But It's recommended that you Draw them on if your painting skills aren't the best. This way you don't get lost and paint the same thing twice...

*** Be sure to use the Lighter GRAY on the Mandibles/ Red Area. DUH!!:rolleyes

And don't worry the Back of the Bucket is coming....

 

Last edited by a moderator: Aug 2, 2017

Got Maul

Well-Known Hunter

• May 13, 2005

• #51

show me some back, baby !

 

AFettFullofDollars

Well-Known Hunter

• May 13, 2005

• #52

------

 

Last edited by a moderator: May 13, 2005

AFettFullofDollars

Well-Known Hunter

• May 13, 2005

• #53

------

 

Last edited by a moderator: May 13, 2005

S

Spideyfett

Well-Known Hunter

• May 13, 2005

• #54

YOUR Bucket looks Great...

But No Offense, Hijacking someone's thread isn't cool...:facepalm

 

Last edited by a moderator: Aug 2, 2017

cal196

Well-Known Hunter

• May 14, 2005

• #55

how thin do you mix the paint so you cant see brush strokes?

 

S

Spideyfett

Well-Known Hunter

• May 14, 2005

• #56

cal196 said:

how thin do you mix the paint so you cant see brush strokes?

Click to expand...

I try to keep it the same consistency throughout...Not to thick and not too thin...
In regards to the Gray Scratches, If it doesn't just flow off your brush without having to apply a second coat it's too thin...
Hope that help...sorry:facepalm

 

Last edited by a moderator: Aug 2, 2017

cal196

Well-Known Hunter

• May 14, 2005

• #57

I know that when going from dark to light brush strokes are a problem but wasnt sure on dark to light.

Oh ya where do you get that sponge square thing looked all over Michael's and asked and turned over every rock and didnt find anything.

Thanks agian Spidey this is helping alot.

 

S

Spideyfett

Well-Known Hunter

• May 14, 2005

• #58

cal196 said:

I know that when going from dark to light brush strokes are a problem but wasnt sure on dark to light.

Oh ya where do you get that sponge square thing looked all over Michael's and asked and turned over every rock and didnt find anything.

Thanks agian Spidey this is helping alot.

Click to expand...

No Problem... Glad it's helping...that's my goal in this..
It's Called a Rubber Cement Pickup.....Normally it's where they have the Rubber Cement or Glues Section...It actually looks allot Whiter when brand-new..Mines a little used..

 

Last edited by a moderator: Aug 2, 2017

DreadPirateRoberts

Active Hunter

• May 14, 2005

• #59

Spideyfett said:

YOUR Bucket looks Great...

But No Offense, Hijacking someone's thread isn't cool...:facepalm

Click to expand...

Sorry Spidey, wasn't trying to Hijack OR step on any toespikes. Just thought Id share the MS2 love that im feeling.

again, sorry if I offended you

DPR





p.s. Mirax.........im working on the banner

 

Last edited by a moderator: Aug 2, 2017

S

Spideyfett

Well-Known Hunter

• May 15, 2005

• #60

DreadPirateRoberts said:

Sorry Spidey, wasn't trying to Hijack OR step on any toespikes. Just thought Id share the MS2 love that im feeling.

again, sorry if I offended you

DPR



p.s. Mirax.........im working on the banner

Click to expand...

Your Cool...It wasn't meant for you..
"WE $$" straightened it out..

Keep Posting..Your BUCKET IS PAINTED AWESOME....
Got a VISOR IN YET???