My Bucket!

Furious

Active Hunter
Woohoo Just got my Marrow_Sun helmet! Thanks Marrow! any tips for me before I get started on this bad boy?

bucket.jpg
 
Do you have any bondo? you will need to fill along the seam and sand. Don't use more bondo than necessary. Go slow when cutting out the visor so that you don't need to rebuild any spots. Hopefully you have a dremel and some type of power sander. WEAR A RESPRIATOR!!! and of course take your time and HAVE FUN :)
 
Yeah I have the bondo.. do I need to also fill in the tiny air buble holes on the back of the helmet? They are really really small I just am not sure if I should bondo those.
 
A thin skim coat will do the trick, but after you prime the helmet and paint you'll never notice the tiny pinholes. They are from the mold it is starting to deteriorate.
 
I just went out and bought a Dremel (along with a respirator and goggles). Thanks for the advice. wish me luck. I know I always like to see people post progress of their helmets so maybe I will do the same.

thanks again Marrow...great helmet!!
 
If you can, try to get yourself a Black & Decker Mouse handheld sander or similar. I highly recommend one. I am in the finishing stages of filling and shaping my MS Fett helmet and the Mouse sander helped to keep the ear sections square. I am currently shaping the dome and filling in the dent (making prepro "eyes" version) and it is even coming in handy for that.
 
This thread is more than 18 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top