Looking to stop the slip

I just got a brand new bobamaker helmet, but when i turn my head it spins a bit, I know stormrider makes an interior kit, but i cannot swing that atm, how does everyone else stopthe helmet bobblehead slip thing? Right now I went to a athletic shop all they had was the little 'U' jaw pads from a football helmet, it works but it's kinda tight.

http://www.thedentedhelmet.com/showt...y-Helmet-liner
works for me.

I cut a strip of foam and run it as a ring inside my helmets. It's pretty much what the helmet liner does, just poor man mode. Let me know if you want a picture.

Originally Posted by askywalker98

I cut a strip of foam and run it as a ring inside my helmets. It's pretty much what the helmet liner does, just poor man mode. Let me know if you want a picture.

yes i would love a photo. Any visual refrence is a huge help.

i just use a strip of foam around the perimeter of the helmet. essentially make sure that there is foam touching both your head and the helmet all around and it should stay pretty steady.

Try inserting a puppy in before you wear the bucket.
LOL J/K

Look at the other pic here, the foam can be seen on the interior around the crown area.

Here ya go buddy. You can see what's going on more clearly in the inside of my Phase II Clone helmet. My Rubies Jango has a bit extra. I got my foam at Jo-Anne fabrics. Way in the back corner where they have massively wide rolls of different materials, they have a bunch of foam, and you can buy it in different colors/thicknesses/sizes. I think a 3ftx3ft was $5 or $10. But at this rate that square will last me a long time!



Let me know if you need any more info.

I have an extra V1 stormrider kit if ya can swing it. Is $60 doable for ya?

it is if ya can wait til maybe the 15th when i get paid, i'll more than happily grab that from you

I'm in no hurry, mate. Just lemme know when you're ready.

i used a hardhat liner, i had foam in mine and it just gets to hot in the summer trooping. the hardhat liner lets some air get in there.