Jango 2-piece injection helmet conversion to Boba ESB

Mister Hyde

Active Hunter
Hi everyone!
Last week my nephew asked me to build him a Boba bucket for Halloween. Since Halloween is only two months away, I won't have time to build him a bucket that will pass his scrutiny. For an 8 year old he's an expert at the small details of a Boba helmet since Boba Fett is his ultimate favorite SW character. So to make my life easier and give myself enough time to give him what he wants, I decided to buy Jango Fett 2-piece injection mold helmet ($25) and convert it to a Boba ESB. Of course I had to OK this with my nephew since the Jango is different from the Boba (ex. right side ear piece and no dent). I assured him it'll look just like Boba's ESB helmet and he agreed.

I've decided to share this conversion progress with you all since I haven't seen any post on this type of helmet (none that I know off). I've attached some pictures of the Jango bucket. You will notice that they made the RF stalk backwards. If I have time I will make a new one since I cannot use this one in reverse. The first thing I need to do is to sand everything down. Until then....

FILE0034.JPG


FILE0040.JPG


FILE0063.JPG


FILE0064.JPG


FILE0066.JPG


FILE0069.JPG


FILE0044.JPG
 
Last edited by a moderator:
I finally finished sanding the helmet and I also made the dent crater (as I like to call it) using a water bottle cap. The next step is to fill in the gap between the two pieces and sand it down, fill in the crater and shape the actual dent. Until then...

FILE0079.JPG


FILE0080.JPG


FILE0083.JPG


FILE0085.JPG


FILE0087.JPG
 
Last edited by a moderator:
Update pics of where I'm at with the bucket. First I reinforced the inside with Gorilla glue and tape for more support and rigidity, now it's not flimsy and a lot more sturdy. I made the dent, filled in the gap, sanded the whole dome down and gave it two coats of automotive primer. Now that all the prep work is done, it time for the fun part...painting. Until then...

FILE0081.JPG


FILE0079.JPG


FILE0084.JPG


FILE0087.JPG


FILE0089.JPG


FILE0091.JPG
 
Last edited by a moderator:
Sorry for the long delay since the last update. My work requires me to travel for sometimes weeks at a time. So I'm back and this is what I've gotten done to date.

I couldn't find the right colors at the hobby shops in my area so I decided to go with standard Home Depot spray paint colors and some acrylic paint I got at an arts & craft store. Dome & cheeks (moss green), upper cheeks (generic black), mandibles (colonial red), back panels (hunt club green) kill stripes (standard yellow acrylic). The moss green I used for the dome and cheeks was too light so I added some of the generic black to make it darker. I sprayed the black from about a foot away lightly misting the moss green. I'm satisfied with the result. Next will be the weathering and battle scars.

Just for the record, this is my first time doing anything like this so I'm opting for the amateur method of painting instead of the professional method so many talented painters on this website use. Until then...

FILE0106.JPG


FILE0093.JPG


FILE0080.JPG


FILE0110.JPG


FILE0082.JPG


FILE0109.JPG


FILE0115.JPG
 
Last edited by a moderator:
Looks really good so far. My only suggestion would be to reinforce the lower cheeks from behind with a rigid, flat piece of plastic so they don't bow out anymore. Just trace and cut a piece that you can glue over the entire inside of the lower cheek to flatten them out. I think it would help tremendously with making the helmet look more accurate.
 
@Maud'Dib Thanks for the advice. Here's a quick update on what I did to the cheeks so they don't bow out so much. I decided not to add anything to the the back of the cheeks so I shaved off a little piece and sanded it down. Then I took a heat gun and used it to soften the plastic then bent it into shape using clamps and poster board blocks so the paint wouldn't get scratched. I love the results.

FILE0080A.jpg


FILE0117.JPG
 
Last edited by a moderator:
I'm back with more update pics. I've completed all the dome scratches along with the back panels and both the ear caps. I not really satisfied with the brown paint I used on the back panels (I used the wrong color, I was using a reference photo that had that color. In reality it should be more of a light gray color). All in all the back panels looks OK.

FILE0121.JPG


FILE0122.JPG


FILE0123.JPG


FILE0124.JPG


FILE0125.JPG


FILE0132.JPG


FILE0131.JPG


FILE0127.JPG


FILE0133.JPG


FILE0134.JPG
 
Last edited by a moderator:
While the paint job looks great, please replace the right earpiece at least. The closed look doesn't look right for Boba.
 
I just got back from the road 4 days ago and finished all the paint job needed for the bucket. I'll post pictures of the finished bucket tomorrow when my nephew comes over to see it and try it out with his Halloween costume. Right now I'm just doing the finishing touches on it. I'm replacing the original t-visor with a green tinted face shield I got at Orchards. I made the bordan connector from a piece of wood I cut from the handle of a chisel tool. And lastly, I installed the inner padding for the bucket.

I included a picture of the helmet that came with the costume and I can understand my nephew's frustration and pain. I sure as hell wouldn't want to wear it also.

Until tomorrow with the finished bucket.

033.JPG


002.JPG


032.JPG


031.JPG


008.JPG
 
Last edited by a moderator:
@clonecollector Thank you, this is my first time doing this.

@Maud'Dib I wanted to modify the right earcap and make it the proper Boba two-piece along with fixing the backwards RF stalk by I just didn't have the time to.

Hello fellow TDH members, I'm finally done with painting the bucket.

The weathering of the entire front of the helmet along with the red areas and the keyhole slots in the back was done with only two colors: bright silver (Floquil) and battleship gray (Model Master). Unfortunately I couldn't find the other colors for highlighting (maroon & base metal) at any of the hobby shops in my area. Also I bought a paint brush kit but only ended up using the fine tip brush, a sponge that I cut into little brushes and masking fluid for the weathering of the entire helmet (I used a sponge so the paint would not show any brush strokes). I'm surprised at what I achieved with only those three things I used.

When I got the paint stencils and saw how detailed it was I was overwhelmed with doubt that I could pull off a halfway decent job, being this is my first time painting a bucket. I should have chosen to paint it ROTJ style, it's way more easier. But my nephew wanted ESB so it was do or die. Please keep in mind that I'm a amateur/beginner and I had limited time so I wasn't going for complete accuracy of the intricate details of the helmet. I just want it to resemble an ESB paint job. I've included before & after comparison shots and close-up shots. Enough of my yapping...here are the pictures.

Not bad for a $25 bucket.

034.JPG


015.JPG


016.JPG


017.JPG


018.JPG


020.JPG


019.JPG


021.JPG


022.JPG


023.JPG


014.JPG


024.JPG


025.JPG


026.JPG


027.JPG


028.JPG


029.JPG


030.JPG


FILE0063.JPG


FILE0064.JPG


FILE0066.JPG


FILE0069.JPG
 
Last edited by a moderator:
@elusivesolution Thank you! Per your request. Here's my brother wearing the bucket along with a very happy nephew ready to go bounty hunting for candies.

002.JPG


008.JPG


004.JPG


014.JPG


006.JPG


012.JPG
 
Man, that is so sweet. It's amazing how much better that Fett costume looks with the superior helmet. I converted the deluxe Jango into a ROTJ Boba, but now I wanna try my hand at modifying the 2 piece Jango. Truly inspirational
 
This thread is more than 8 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top