Hyperdyne voice changer help

  1. #1
    mandalore697's Avatar
    Member Since
    Dec 2004
    From
    London, UK
    Posts
    956

    Hyperdyne voice changer help

    Hey guys,

    Had a hyperdyne unit turn up today, but having problems, so anyone with experience I would appreciate you help.

    I'm getting no sound coming through at all. It plays the static burst when I finish talking but that's it, no speech in between.

    Any ideas?

    Thanks

    Dan

  2. #2

    Member Since
    Feb 2006
    Posts
    1,001

    Re: Hyperdyne voice changer help

    Are you using a powered mic or non-powered?
    (Does the mic require a battery)

  3. #3
    mandalore697's Avatar
    Member Since
    Dec 2004
    From
    London, UK
    Posts
    956

    Re: Hyperdyne voice changer help

    Powered mic. I've tested the mic on it's own and it works fine.

  4. #4
    I helped at SDCC '08 Jimmy BufFETT's Avatar
    Member Since
    Apr 2006
    From
    Phoenix, AZ
    Posts
    2,861

    Re: Hyperdyne voice changer help

    I take it you've got the TK voice chip. You're tellin' me you hear the static burst when you finish talking, but you do not hear any speech when you speak?

    If that's the case, just outta curiosity (can't hurt to ask) ... did you push the remote 3 times before using it? You turn it on, you hear about 4 beeps, then you push the remote button: 2 beeps. Push again: two beeps. And push again: two beeps. Push a fourth time: 4 beeps. Now the unit is ready to go.

    Is you speaker volume up enough?

    If the sound is coming in too low, then try this (but I warn you, it will be EXTREMELY loud) ... with the unit off, hold the remote button down. Turn the unit on and continue to hold the remote button down for 1/2 a second.

  5. #5
    mandalore697's Avatar
    Member Since
    Dec 2004
    From
    London, UK
    Posts
    956

    Re: Hyperdyne voice changer help

    Jimmy BufFETT said: View Post
    I take it you've got the TK voice chip. You're tellin' me you hear the static burst when you finish talking, but you do not hear any speech when you speak?

    If that's the case, just outta curiosity (can't hurt to ask) ... did you push the remote 3 times before using it? You turn it on, you hear about 4 beeps, then you push the remote button: 2 beeps. Push again: two beeps. And push again: two beeps. Push a fourth time: 4 beeps. Now the unit is ready to go.

    Is you speaker volume up enough?

    If the sound is coming in too low, then try this (but I warn you, it will be EXTREMELY loud) ... with the unit off, hold the remote button down. Turn the unit on and continue to hold the remote button down for 1/2 a second.

    That's right, plenty of static at the end but nothing in between.

    The unit worked fine to start with, but for some reason it now no longer let's my speech through.

  6. #6
    I helped at SDCC '08 Jimmy BufFETT's Avatar
    Member Since
    Apr 2006
    From
    Phoenix, AZ
    Posts
    2,861

    Re: Hyperdyne voice changer help

    Try taking the chip out and putting it back in. I hope you didn't push the chip down all the way ... that may be the problem. If none of this works, try contacting Hypderdyne and asking for trouble-shooting tips.

  7. #7

    Member Since
    Feb 2006
    Posts
    1,001

    Re: Hyperdyne voice changer help

    If it worked fine before and now has trouble, I would say there is a technical issue with the board. Like JB said, contact HD.

  8. #8
    mandalore697's Avatar
    Member Since
    Dec 2004
    From
    London, UK
    Posts
    956

    Re: Hyperdyne voice changer help

    I'll see what HD say then. Thanks for your help.

Similar Threads

  1. FYI: voice changer
    By wanta be jango in forum The Sarlacc Pit
    Replies: 16
    Last Post: Sep 17, 2009, 11:06 PM
  2. Voice changer - Where do you fit?
    By Mandalorian Guard in forum Jango Fett Costume
    Replies: 7
    Last Post: Sep 4, 2009, 11:05 AM
  3. Question: Voice changer
    By jwinnington in forum Boba Fett Helmet
    Replies: 11
    Last Post: Jun 23, 2009, 3:06 PM
  4. Question: Voice amp advice ROM FX v's Hyperdyne v's ???
    By Bobby Fett UK in forum The Sarlacc Pit
    Replies: 3
    Last Post: Jun 20, 2009, 1:32 PM
  5. Voice changer
    By tteF aboB in forum Boba Fett Helmet
    Replies: 16
    Last Post: May 6, 2003, 2:32 AM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •