Here we go again, my new MSH2 paint job,(update 30/6/04)

mobius

Well-Known Hunter
I got this awesome MSH2 the other day, and I´ve been painting it for the last day´s here is where I´m at


Here are the pics. Next to do is the topical painting silver and etc. I used Polly scale from the bottle but mmixed the back colors my self with a little help from Steve the Swede.

I masked the back with liquid latex and painted the blue over.

I also added a little Red to the boxcar red as I found it to be a bit to brown.

<font color="#CC0000"> Update 30/6/04
More detail added just wanted to show you. I took some days off from the helmet. I moved to the left side of the helmet and soon I will start on the dome. When that is finished I will have to go over the helmet again and add smaller details. Hope it will be finished before september 20th.

IMG_3617.jpg

IMG_3618.jpg

IMG_3616.jpg



Just added some small details here and there, I´m prepering the next move.

Here is A lousy pic I took the silver is very bright there don´t pay attention to it.

IMG_3297.jpg


I´ve moved to the front of the helmet and started working there as you can see I´ve managed to add some signature scratches and I have some detailing to add to the mandables andthe scartch beside the ear.

IMG_3281.jpg

IMG_3282.jpg

IMG_3215.jpg

IMG_3219.jpg

IMG_3217.jpg

IMG_3218.jpg


I just finsihed weathering the right backside of the helmet. I used pastels for the weathering and blast mark and used an Xacto knife for the scratches. For the yellow smudges I used UP armor yellow and wiped a bit of with a towel or my finger.

MSH2-010.jpg
 
Did you download the ones from TK409's website? Those are the ones I used.
 
Last edited by a moderator:
Looks good so far. What did you use for the yellowish color on the back?
 
Last edited by a moderator:
Lookin real good man!!! YEah, I used the TK409 template too, works really good:)
Damian
 
Last edited by a moderator:
Looking good! Though, I think the back "scratch" color is way too yellow. The lights at AOSW appeared to be yellow halogen lamps, and I think the color of those scratches gets distorted in photos where the lights are directly hitting the back of the helmet.
 
Last edited by a moderator:
It is acctualy much darker the flash brightens it up, It got even more darker after the wash I did.
 
Last edited by a moderator:
I love the keyslots of the MSH. They're better shaped than the ones of the MH. Nice job!
 
Last edited by a moderator:
Mobius man! That looks amazing! :D
I assume you're doing it all topical? That's alot of inspiration for me. I can't wait to get started painting mine.

What types of brushes are you using for the scratches? And are you using airbrushes for the major areas?

Bartek
 
Last edited by a moderator:
I noticed you have what look like screws on the inside of the visor area, I was planing on using a technique of countersunk screws through the helmet then bondoing over them from the outside, then ataching the visor onto the screws and using nuts to tighten it up, is this what your planning? Oh lord i've confused myself ha ha. Looks great by the way
 

HeadlessHunter wrote:

I noticed you have what look like screws on the inside of the visor area, I was planing on using a technique of countersunk screws through the helmet then bondoing over them from the outside, then ataching the visor onto the screws and using nuts to tighten it up, is this what your planning? Oh lord i've confused myself ha ha. Looks great by the way

I decided to use screws just the other day and than I already had painted the mandable so there was no way that I was gonna screw them in like you said, I new that would be a good idea but I was not ready to begin all over again with the painting.

So I just made a small groove inside the helmet and used a 2 part epoxy and glued the screws in place and let dry for many moons.

So now I can take the visor out whenever I want to just remove the nuts no problem.
 
This thread is more than 19 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top