help needed on ear details

M

msquared

Guest
I was wondering if someone could tell me how to do the details seen on the ear pieces. Im talking about the white U shaped thing and the black with white inside U shape. Thanks.
 
Are you talking about the right ear decal of the ESB helmet??
Maybe you can find the set for both ear pieces in the Cargo Hold, I saw them a while back.

Or maybe you can get the template that is posted in the Ref CD and print them yourself. :)
 
I used masking tape and an X-acto knife. I cut the shape of the U in the tape and stuck it on the ear piece.

Then I gave it a few light coats of spray-paint and let it dry in between coats.

This is how they look:

TDH_NSU_bits.JPG


I could have done a better job of it, especially the white bit in the black U on the gold piece. Lucky for me this was juct practice and when I paint my next helmet I'll get it right. :D

Hope that helps.

Cheers!
TJ
 
This thread is more than 20 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top