Subscribe
  1. DL44 Blaster's Avatar
    Member Since
    Mar 2002
    Posts
    1,935
    Mar 27, 2004, 1:39 PM - Help with Clear coating armor/helmet/gauntlets/etc. #1

    I've ordered all my paints from the Testors website which will arrive some time this week.I held off on the clears since I wanted to some here first to get some clarification.

    In the guide provided by Rogue Studios the instructions state to "seal knees&shoulders with Semi and Armor with Flat"..I get this since it spells out the "semi" parts and the "flat" parts.

    Then it says in the helmet instructions to "seal finish with Clear coat then a dulcoat to prevent tearing"..please explain this stage......I'm assuming that EVERYTHING is flat except the shoulders & knees......is this correct??

    Could someone elaborate???

    Is a "dulcoat" simply a "flat" clear coat?? Should a semi clear go on fist,then a flat?? Any help will be greatly appreciated in this most important final step of painting

    Thanks,
    Steve
  2. Jango's kid's Avatar
    Member Since
    Nov 2002
    Posts
    2,517
    Mar 27, 2004, 3:51 PM - Re: Help with Clear coating armor/helmet/gauntlets/etc. #2

    Anytime you are planning on doing some masking with tape, you will want to spray that area with testors semi-gloss, you can then apply flat over the smi-gloss. plain old flat doesnt seem to seal as well, and you'll rip the paint right off your prop when you mask unless you use the semi-gloss first. You should also "kill" the tape by running it across your leg a couple of times to remove some of the tack, you can still tear paint off even in you sprayed with semi-gloss, so use care, (Ihad alot of problems with this on my bucket.) If you are not going to do any masking on an area, you don't necessarily have to use the semi-gloss, but its still a good idea. I think testors makes a couple different flat finnishes. I have one that is called "dull coat" and annother that is called "lusterless flat" there is maybe some difference between them, but I can't really tell the diff when sprayed on something. although the "dull coat does seem to seal a bit better. hope that helps a bit
    Damian
  3. DL44 Blaster's Avatar
    Member Since
    Mar 2002
    Posts
    1,935
    Mar 27, 2004, 7:18 PM - Re: Help with Clear coating armor/helmet/gauntlets/etc. #3

    So basically per instructions the final and last step of painting is indeed done with a flat or dulcoat.?.?...except for the knees & shoulders.

    Any other specific brands recommended? Are these spray cans or for an airbrush?

    Thanks again,
    Steve
  4. DL44 Blaster's Avatar
    Member Since
    Mar 2002
    Posts
    1,935
    Mar 28, 2004, 6:44 PM - Re: Help with Clear coating armor/helmet/gauntlets/etc. #4

    Well,I just ordered the Testors "Dullcote" in the 3oz. spray cans to finish my ensemble.With that I'll have every color and clear I'll need.....wish me luck

Similar Threads

  1. Cardboard Helmet Coating/Visor Questions
    By jeod66 in forum Boba Fett Helmet
    Replies: 8
    Last Post: Feb 21, 2007, 11:22 PM
  2. fiber glass and clear coating ABS??
    By sewbacca in forum Prop Building Workshop
    Replies: 4
    Last Post: Feb 17, 2007, 4:27 AM
  3. Coating Vacuum Form Bucks
    By ZeroVisibilite in forum Prop Building Workshop
    Replies: 6
    Last Post: Feb 8, 2007, 12:49 AM
  4. clear coating
    By Grizzly in forum Expanded Universe Bounty Hunters
    Replies: 3
    Last Post: Dec 1, 2006, 11:30 PM