FP Budget helmet in COLD CAST!

I took some time today to work on my helmet a little. A few weeks ago I killed my palm sand and went out and bought something a little smaller that came with sanding pads in it. It also has one with steel wool on it. What you see took about 5 to 10 minutes. What do you think?
 
I have an Asok CC Resin Jango and an Asok CC Fiberglass Jango... I'll have to check the PP account, but I will probably be in for one of these soon ;)
 
Yes I did a few in FG. They turned out okay and to me a lot of work. The other problem is it is just way to cold here in Indiana to make them.
 
If you were looking to ID them, I know Java over at the clone-empire boards puts some sort of IC ship in the earwell area of his clone helmets. When scanned there is a number that comes up on a reader. He writes that number inside with a sharpie. No one would be able to tell unless they had a scanner though.

Nice looking helmet!!
 
If you were looking to ID them, I know Java over at the clone-empire boards puts some sort of IC ship in the earwell area of his clone helmets. When scanned there is a number that comes up on a reader. He writes that number inside with a sharpie. No one would be able to tell unless they had a scanner though.

Recasters beware
 
For just a little update, I now have the mold for the ear and aluminum power is on it's way! The aluminum range finders are still about 1 to 2 weeks out. Getting closer!
 
I will be keeping an eye on this thread. I sent you an email stating my interest, but I will chime in here as well! Can't wait to see the whole thing!
 
@Mr Fett..no they are not heavy at all. They are really the same you just add the CC to the resin on the outer layers.
 
overall it adds a negligible amount of weight. this helmet is a bit heavier due to the fact that it has more layers of resin involved, it's pretty thick to add strength.
 
This thread is more than 10 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top