Cheek Greeblie Orientation: SOLVED! Measurements posted!

Fetthunter said:
hmmm.... my helmet (MSH) was based off the AoSW helmet, which is the one that Natty used for measurements, right? Instead of the MoM pics, all I have to do is scale the greeblie in the AoSW pics and I'll have the measurements I need for *my* helmet!!! :D

More to follow once I get new measurements! :)

::EDIT::

New AoSW (MSH) measurements! :D

cheek3.jpg


I've changed the other graphic (2nd pic in this thread) to reflect that it is for the MoM helmet. :)

Interesting how the measurements on the greeblie positioning varied from MoM helmet to AoSW helmet, though not by MUCH...

Is there a quick way to determine metric measurements for the standard one supplied here?? I want to get mine DEAD ON to what Fetthunter came up with,but don't have the tools to get the standard ones transferred. :)

Thanks,
Steve
 
DL44 Blaster said:
Is there a quick way to determine metric measurements for the standard one supplied here?? I want to get mine DEAD ON to what Fetthunter came up with,but don't have the tools to get the standard ones transferred. :)

Thanks,
Steve



0.53 inch = 13.462 millimeters

1.625 inch = 41.275 millimeters


Anything else? ;)
 
This thread is more than 19 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top