Which is the best way to attach a T-Visor?

Hello guys!

Which one is the best way to attach a T-Visor to a helmet?

I guess glue is not a good option. I´ve seen many people using a kinda of gum for atach it.
What kind of material is that? Where can i get it?

Really thanks!

JB Kwik in the automotive section at the hardware store. It's a two part epoxy, almost like putty. There is a diagram of the visor floating around here somewhere.

TF

Originally Posted by team_fett

JB Kwik in the automotive section at the hardware store. It's a two part epoxy, almost like putty. There is a diagram of the visor floating around here somewhere.

TF

i've had bad luck with jb kwik... it's so brittle, the slightest impact causes it to come apart. i did some parts of my gauntlet with it, and the came right off the first time i whacked my arm into something :-/

for my visor, i used black silicone adhesive/sealer from an automotive store. i think it's meant to seal up windshield leaks.

it holds well, but has some flex to it so it won't pop out easily.

I used Plastic Weld Epoxy. It is made to adhere to the type of material the buckets are made out of. Easy to use and apply, dries perm. hard in 15 minutes, and is super durable. I used the inside 'tacking' method that is explained on tk409.com. You only need to put a few dabs placed in strategic locations.

I used hot glue to set it first, then reinforced it with GOOP, then put industrial velcro loop around the edges to cover the glue.

i hung mine upside down, face down, placed the visor in, used adhesive glue (latex like) and hot glue