Subscribe
  1. Member Since
    May 2004
    Posts
    60
    Feb 2, 2005, 9:43 PM - Bad Day #1

    I need to share what happened to me today. I got home from work today and noticed that my bucket wasnt' where I left it the night before. It had fallen off the kitchen table and BROKE. Man am I upset. The left mandible has completly broken off from the helmet. I am hoping that I can fix it. It is a DP 95 but I am not sure that it is salvageable. Wish me luck
  2. shortimer52's Avatar
    Member Since
    Nov 2004
    Posts
    2,287
    Feb 2, 2005, 9:47 PM - Re: Bad Day #2

    Hearts are with you.
  3. BobaFettSlave_1's Avatar
    Member Since
    Oct 2004
    Posts
    1,716
    Feb 2, 2005, 9:54 PM - Re: Bad Day #3

    it should be salvagable. i had the same damn thing happen to me last month. and mine was fiber glass. i fixed it up though and i am gunna sell it
  4. Jango_Fett_Jr's Avatar
    Member Since
    May 2002
    Posts
    1,957
    Feb 2, 2005, 10:05 PM - Re: Bad Day #4

    Is that all that broke? If so, that should be a piece of cake to fix. Drill a hole on both sides, and use a small piece of wire like a cloth hanger to align it. Then superglue it, and use some bondo to smooth the seam.
  5. Member Since
    May 2004
    Posts
    60
    Feb 2, 2005, 10:10 PM - Re: Bad Day #5

    Well I got some epoxy that is suppose to work on vinyl and I hope that it works
  6. batninja's Avatar
    Member Since
    Jan 2003
    Posts
    1,900
    Feb 2, 2005, 11:37 PM - Re: Bad Day #6

    I used JB Welb on my old '95. Worked great.
  7. Prymer13's Avatar
    Member Since
    Apr 2003
    Posts
    1,090
    Feb 3, 2005, 12:06 AM - Re: Bad Day #7

    superglue, bondo and tape to hold while it sets....ALL YOUR FRIEND
  8. fettcicle's Avatar
    Member Since
    Mar 2002
    Posts
    1,263
    Feb 3, 2005, 1:12 AM - Re: Bad Day #8

    Way back when, I made my own helmet. It was a chore because I had never used fiberglass before. I did it the hard way and built up the layers and sanded areas down. My Father was suspicious of my "activities" in the basement and the unexplainable fumes. Nothing but bondo and glass resin. Anyway, I had most of the helmet built, and had it on a work bench. My mother alerted me to the fact that she heard some noise in the basement when my Father went down there for an extended period of time.... I ran down to find my helmet on the floor with a 4" crack in it! I was able to fix it..... fortunately, but my Mom beat up my dad for me
  9. BobaBabe's Avatar
    Member Since
    Jan 2005
    Posts
    106
    Feb 3, 2005, 1:15 AM - Re: Bad Day #9

    That sucks! I'm so sorry! Maybe you could find one of those dummy foam heads from Sally's Beauty supply or a other type store to sit it on so it won't fall again. Their cheap, and it might be helpful.