ASOK style topper question

  1. #1

    ASOK style topper question

    Hi guys, did some searching but didn't find a thread pertaining to my question. I have an ASOK GMH and I was just wondering if you have a light kit that is self contained with a battery that fits in the topper, what is the best way to build the topper to be able to change the battery in the future? Velcro? Any suggestions or advice would be much appreciated.

    Thanks,

  2. #2
    Vultana's Avatar
    Member Since
    Mar 2012
    From
    Frederick, United States
    Posts
    503

    Re: ASOK style topper question

    My understanding was that the ASOK GMH had the same topper has his budget, therfore the JC27 one should work for you. Of course, someone else can correct me if I am mistaken on that.

  3. #3

    Re: ASOK style topper question

    Vultana,
    Thanks for the response. I haven't built it, put it together yet. I just didn't know if it was a permanent glued type situation or a snap together replace the battery easy in the future deal. My main concern is how to keep it to where you can change the battery.

  4. #4
    Jc27's Avatar
    Member Since
    Jun 2012
    From
    Pennsylvania
    Posts
    1,646

    Re: ASOK style topper question

    Check out my Asok light kit thread in the cargo hold. It may answer some of your questions. If you are interested in a kit send me a PM and I will put you on the list.

  5. #5

    Member Since
    Jan 2013
    From
    New Jersey
    Posts
    182

    Re: ASOK style topper question

    I used a small piece of industrial strength velcro that held for about 10 hours before I took it off. Put it right at the front and it held.

  6. #6

    Re: ASOK style topper question

    I used a really small rare earth magnet and slid it down close to my light board. I made the light myself though so I am not sure how much room you would have with another. Then I just glued the magnets on the topper and the clear part and it snaps in place and is tough enough it wont come off unless you pull it apart.

  7. #7

    Re: ASOK style topper question

    tb5716 said: View Post
    I used a really small rare earth magnet and slid it down close to my light board. I made the light myself though so I am not sure how much room you would have with another. Then I just glued the magnets on the topper and the clear part and it snaps in place and is tough enough it wont come off unless you pull it apart.
    Thanks ttb, I am using some small magnets to hold my ear cover on. That's a great idea and I don't know why I didn't think of it.

    [COLOR="silver"]- - - Updated - - -[/COLOR]

    Jc27 said: View Post
    Check out my Asok light kit thread in the cargo hold. It may answer some of your questions. If you are interested in a kit send me a PM and I will put you on the list.
    Thanks Jc, I like your kit for sure but I went with another one that had the servo/wireless stuff included. Appreciate the help.

  8. #8

    Re: ASOK style topper question

    Did you get this situated? If so, have any pictures?

Similar Threads

  1. Question: Priming the Asok CC
    By ChrisTheArtist in forum Boba Fett Helmet
    Replies: 17
    Last Post: Oct 2, 2013, 7:36 AM
  2. Question: Asok Cold Cast Helmet Template Question
    By Cameron in forum Boba Fett Helmet
    Replies: 27
    Last Post: Feb 14, 2013, 11:09 PM
  3. Moderators - Forum Style Chooser Question
    By rubio95 in forum Site Support & News
    Replies: 6
    Last Post: Oct 9, 2012, 3:16 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •