+1 sir. May pick 2 of these up off of you pending price. Also, will you be working something out with mrg8ness to offer these with electronics already installed?
+1 sir. May pick 2 of these up off of you pending price. Also, will you be working something out with mrg8ness to offer these with electronics already installed?
I will drill and tap my new hollow drilled stalks to fit these if I can
get the hole pattern for this new design. I could also install long sets screws to act as studs if that would work better. Please PM me at maxxius8@aol.com
James in TEXAS
I still have some full aluminum ear sets available:facepalm
Thanks, i'm chuffed you like them
The hardware supplied is for stalk fixing, the last pic at the top shows how i fixed one of my cold cast stalks to the RF top. The threaded stud is 10mm long x 3mm so i drilled two 3mm holes 5mm deep and glued them in place. Then the nyloc nuts hold the RF in place, i used needle nose pliers to tighten them. A neater solution would be to tap the threads into the stalk which will give you more options as the studs can be tightened with an allen key...
Well, as it happens I have a set of commandoeight ears and stalk and wanted a quality topper for them, I will most likely drill and tap that. If you both want me to post up the process i used I am happy to, will be first week in Jan though now due to Christmas shutdown.
Well, as it happens I have a set of commandoeight ears and stalk and wanted a quality topper for them, I will most likely drill and tap that. If you both want me to post up the process i used I am happy to, will be first week in Jan though now due to Christmas shutdown.