Printable View
Well here it is, my latest creation. Briareos from Appleseed. It's ready for molding as you see it, and I'm looking for some final critique. Sculpted out of bondo, apoxie sculpt, great stuff, mdf board, pvc pipe and other things. I'll post pics of the finished helm when I'm done. There will be a light kit of red or green and a clear lense for the center eye to see through. Whatcha think?
Rusell
WOW Great work Russ:thumbsup
gorgeous mate! been searching web hi and low for ages - and was surprised to find no one had done one?!?!
I have been researching this for a while now myself - and was planning a clay sculpt come Nov. You've also based it on the recent updates ie the appelseed CGI movies rather than the original anime/comics - which is wot my research was on and the look I prefer!
My original plan had been to do a 2-part lid, the face/ear modules; and then a helmet bit; and have the 4 lens bit as a resin cast attaching to the ear mold. I was worried abt the detail being lost whilst molding as a one-piece.
Not that I could do better - but wot abt detailing where the small double lens meets the ear pience anteriorly? Not a huge image - but looked liked it was a little more grooved here
http://i119.photobucket.com/albums/o...riareos_01.jpg
you seemed to have got the subtle curves at the back where the rabbit-ear ball and socket joint meets lid - very nice.
How did u solve problem with the rabbit ears? I was worrired abt weight myself?
soz abt all the comments - its stuff that been bouncing abt my own head for a while. It is truly a gorgeous sculpt, top class. Am I glad someone with skill did it rather than wot would have a poor attempt by a part-time sculptor like myself :P
I waanttsssesss it, I neeeeedddsseesss it....ppprrreeeecccciiiiooooouuusussssseess
Nate
ps u still doing ur cool iron man lids as well ?
That's incredible! I own this movie! ^_^
:skull El1te
I think I love you, looks awesome!! Are you... planning on doing a run? ;)
hey man - if u needing "interest" list to consider a run - colour me interested!
pending cost and ability to ship to old blighty ofc
Nate
Russ. Amazing work yet again! Love it.
Thanks all for the compliments. You were right about it being more grooved where the double lenses meets the ear, but I had to cheat it out a little to make sure there was room inside to make it wearable. As far as the weight of the ears, I'll have to see what works best, solid cast or hand lay fiberglass.
When I've finished the mold and get parts from it, and have a finished piece to show, I'll post an "INTERESTED" thread. Thanks again and I'll keep you posted!
RussellQuote:
Originally Posted by Heatshock
To Heatshock, I still make the Iron Man helmets upon request.
very nice. pm'd
definately put me on an interested list. Although I may have to raid my fund for gettin a TE2 finished stormtrooper lid :D
oh forgot to ask - size wise; is this as small as the iron man helmet? or made for a more generic "big lug"?
Nate
I don't know the character but my gods... this looks so stunning, your sculpting skills are more then amazing... how do you go about the casting proces now then?
As far as size goes, it's much bigger than my Iron Man helmet. Unless you are Andre the Giant you'll probably have no problem. Measurements are; 35" in diameter at center,10 1/2" wide(9" at deep groove in ears), 13" from chin to top, 9" from behind jaw to top,the ears are 15 1/2", and it's 11" from the center eye to back of head.
As far as molding and casting, as we speak I'm determining my seam lines for the mold, probably two part silicone, and three to four part mother mold. I may be able to cast it as on whole piece through the helmet opening. The ears will be seperate and cast with all-thread and then bolted in place.
roger that russ ta for replies. Nah - I got me a standard head, measurements look spot on. Only other Briareos lid I've seen before was the PA one at D-Con.
RBF - if u dont know the character; have a look into either the manga or CGI movies; both are amazing bits of work, DR's work definately fits in well there. Surprised that there wasnt more available for the characters helmet over the years.
I would also like take this opportunity to publically apologise to community and moderators for my language in my 1st post in this thread. No intentional offense was meant. :o:( Reviewed COC, soaped my mouth and forewarned for next time.
ps Russ - u quoted my remarks in ur reply to me which still containts the offending word right at the start - would u mind editing out for me too pls
Cheers
I just watched Appleseed ex machina and wondered if anyone attempted this yet. Nice work. :thumbsup.
MAN oh MAn!!!!
Definitely tnterested in this one!
That looks awesome! i barely saw the movie today.
Russ,
That is awesome bro!!! Very very NICE!
So sick!!!
Man, that looks sick! Very very nice work! I'd like to see how it all comes together with the lights. Good luck on casting!
Wow, excellent sculpt! I want one. pm or email me when its available. email
r24kids@hotmail.com
that sculpt is just amazing. great work
Definitely amazing work on your Bri helmet sculpt! It's great to see Appleseed getting some love. :love
I'm currently in the planning stages of a movie-verse Deunan, so color me really interested if you happen to do a run of this helm!
wow fell in :love with movies and now I want the Hot Toys figure. :)
:thumbsupI'll put you on my list and thanks.
Deunan huh... Head sculpt, costume or what? I'd love to have one for my Bri. I was considering making a wig for my wife and trying to put costumes together. Her hair style is really cool but not sure how it"ll transilate into actual wig prop.
Color me interested if you make something wearable, or static bust would be nice too. Hmmnn. let me know what your up to.
Quote:
Originally Posted by Resilient
I love this toy from Hot Toys. Amazing quality and acuracy. Looking to get thier Iron Man 12" lite up figure.Quote:
Originally Posted by SoulAssassin
Did you get it from Sideshow or overseas? Im looking to buy one but cant find one in the US only from asia.Quote:
Originally Posted by DangerRuss
Costume. Ex Machina-style ESWAT gear to be exact. Now that my Hot Toys Deunan finally arrived from Japan, I plan on starting with the headband (w/ the targeting eye patch) on a lifecast bust I have. Then moving on to the bodysuit with the help of a seamstress.Quote:
Originally Posted by DangerRuss
As for the hair, I'm going to go the route of getting it cut/styled since I wear my hair short and have a similar hair color anyway. I'm assuming you're thinking of her hairstyle in the movie? I think it could translate pretty well into a wig too. You could maybe commission someone who makes anime cosplay wigs due to the style. Her 80's style do's from the comics would probably be a little trickier though, lol.
Wow, that looks great!
e-bay baby. got it for $185 plus shippingQuote:
Originally Posted by SoulAssassin
Do you rememeber who the seller was? I wanna buy it from someone I can trust.Quote:
Originally Posted by DangerRuss
I don't know what that is, but it's pretty cool.
e-bay handle chogokin77. It was prestine, box was undamaged, fair price buy it now, shipped in timely fashion. Yeah the box and packaging is cool. Definately worth the money.Quote:
Originally Posted by SoulAssassin
...ooo resilient - would love to see how the ESWAT body armour works out. I want to do a CGI Briareos... and now since DR has got a nice lid going - might try to get forearm armour sorted 1st. Then chest/ab plate...Quote:
Originally Posted by Resilient
Russ - if u wanted to get in touch with a cosplay wigmaker - I know a good one, although she mostly does Cloud from FFVII. Only prob is shes based in UK.
Nate
Wow, I never saw the movie, just looked up a few youtube clips. Incredible sculpt. This would be a perfect suit for me. Just gotta work on the muscles and get broly rofl
Heatshock. let me know if you do the forearms, chest /abs. I could use a set for my costume.Quote:
Originally Posted by Heatshock
will do mate - gonna try for arms 1st - CGI style ofc. 2nd time I am trying a sculpt - so dont expect quick results man.
Was also gonna be interested in the Deunan body armour idea from Resilience - not sure how I will approach that yet
we should get a Project Appleseed section :D
u noticed some Appleseed replica ordance on the Bay atm - its from a dutch guy? Unfortuantely its ordance from the original animation movie I think.
DangerRuss,
Would it be possible to add more detail especialy in the rabbit ear base area where there looks to be a screw, and the forhead area where there is finer engraving details? Possibly some extra lines around the mouth parts? The area under the left/ right eyes seems to have a dip also from my first image. Maybe more detail on the rear eyes where they connect to the ball?
I uploaded some shots from the Blue ray version...
http://img509.imageshack.us/my.php?image=duorb7.jpg
More of that head plate thing...
http://img300.imageshack.us/my.php?i...p102126vn1.jpg
it says (pardon my poor ascii art)
[ HECATONCHEIRES ]
[/////////SYSTEM//////////]
..../\
<|><|>
....\/
There's a similar one on the back of the helmet too...
http://img300.imageshack.us/my.php?i...p115566ga1.jpg
looks to be the same text however, it's in a different panel shape outline.
Very good observations. I took some liberty to the details to make it easier for molding. Also had to make some changes to make it an actual wearable helmet. As far as detail in the forehead, I had planned on having decals or stickers made for the logos in front and on back. Thanks for your input, I'm trying to make it as detailed and accurate as humanly possible. Thanks,RussellQuote:
Originally Posted by Saikwa
Yea, I just picked up Ex Machina the other day. I really want to do a Briareos now. I'd do the one where he's in the tux at the party lol
New pics. Ear molds done. size comparison. holding ears.
Pure awsome at it's best right there! I really want one now!
i don't know appleseed, but that's a hot helmet right there!
very nice progress Russ. I found the ur head-next-to-helmet shot really useful too.
yeesh - that got to be the neatest mold casing I have ever seen!
*waits patiently with popcorn*
cant wait to see the finished product!
It's what I do. thanks for the props! The key to making good parts is making good molds.Quote:
Originally Posted by Heatshock
that looks like a rly cool. I remember going to the premiere for the most recent appleseed movie at Wondercon. I walked out like 30mins in... not rly a fan, but your work is fantastic.
That is amazing! Godd work bro :thumbsup. Oh by the way I checked the ebay seller you recommended but hes out of Hot Toys Briareos :cry
That is just to sweet,,,,
I dont even know what this helmet is from, but it displays wonderful craftsmanship. Great work!!!
Appleseed is one of my favorite movies... great work!
Looking great! The head comparison makes it look even better!
Updates. seam line determined. clay wall built. silicone print coat applied.
I am so ready to see the first cast from this mold :bowdown:
Holy Cow, dude! This is incredible!!! Amazing work here!
G-Fett
hey Russ - that some mighty fine work man.
was wondering wot u have sourced for the lenses?
Nate
Here is an example of the light(s). This one is yellow(only one I have right now) and is not lit in the pic but the light kit will be green or red. It's a LED. 7 lights will be in the light kit. 5 in front, 2 in back. The one for the center eye will be placed behind the clear lense and be detachable for when you want to wear it and see through it. Will be attached to a portable power source. This light kit will be available in the finished helm price, and for those who want the raw cast I'll include it for my cost.Quote:
Originally Posted by Heatshock
update. The silicone print coat for the back half is applied. If all goes well I'll be pulling parts this wekend! Can't wait!
:run:Quote:
Originally Posted by DangerRuss
Im going to go insane when I see this!
sweet!
Russ,
Am riding drag on the work you done so far on this but sweet mother of all things great...awesome work!!!
I want one!
Stay safe,
Tim.
Started to ruff out the shoulder armor while waiting for silicone to cure...
Looking really awsome bro!
That is just sick.
sick, sick, sick!
And I want to be able to do that!
rofl - thats a rough?
*rummages through house to look for stuff to sell*
Russ - u are killing me man!
Nate
This is amazing. If your not working in the Film Industry under Special Effects and Prop making, i would be really disappointed.
Can't wait to see more stuff from you, and updates on this Project. Your the reason i look at the Forums everyday now!
-
Alexei
Woa! Just realized your over in Jax, Im in Tally!
(I think I just became that much more annoying lol)
I have a question... What are you going to be making these Helmets for?
For a Halloween Party?
For the sake of making it?
Just wondering, Anyways keep it up
I would love to finish the whole costume for this halloween, but I'm afraid that won't be possible. To many parts to make. I'll probably have the helmet done and shoulder armor, and I might just cheat the rest of the costume for now, close enough. But I've really fell in love with this characters style and do plan on completing the whole costume. Next year!
But I do it for the sake of making it as well. It's an art form, I'm a sculptor, helps me express my talent and gain some fans while not being judged. Well, at least I've gotten nothing but positive feedback from here and therpf. Thanks!
Quote:
Originally Posted by IronAlexei
So close...:cheersQuote:
Originally Posted by tubachris85x
Oh so you are making the Full costume! Awesome. Yeah, you should use the full one next year. Chuck Norris would not even be able to do it before Halloween.
WOW!
Awesome job man! you have tremendoues skillz.
Mold complete! It looks sweet! First part curing as we speak!
I can't wait to see this finished! I always thought he looked cool. :D
That REALLY turned out Great!!!
Wow! This is Awesome! But it looks like it could get hot in there, Do you think there's any room for fan/s and battery compartment after some padding?
I got my first pull! As you can see, some minor clean up is to be done along the seam line, also in some areas there will need to be some filling of air bubbles in the deep parts of the mold (eye details ), where the material trappped air. I primed the mold with sandable primer, then I used a brush on urethane ( shell shock ) for the print coat and backed it with fiberglass. It is very strong and feels like a football helmet. Vision is good as far as seeing thru the center lense. Plenty of ventilation with the openness under helmet, and room for small fans if neeed. Room for the light kit as well, power pack tbd. Moving on to the clean up and attaching the ears, when I get a clean shot all post again! WooHoo!:D
Amazing!!!
Looking very very nice!
lookin good there Russ.
I am kinda new to the materials so apologies if wrong terminology used, just interested in some of the methods -
(1) I liked the idea of sandable primer for the most superficial layer - is that a standard procedure?
(2) Looked up smooth on site - is urethane plastic the same as polurethane? And do u use the slow or fast stuff? Also did u just use 1 layer or several?
(3) FG backup - just the sheets + resin type stuff - similiar to stuff used for car body work I take it?
(4) I have seen some other FG interiors looking quite rough - are u planning on putting roto resin on the inside?
Have fun on clean up! cant wait to see finished product mate.
soz to hear abt the IM mold btw mate :(
Nate
this makes me want to take sculpting classes. Great job!
Too cool ! Thanks for sharing the process photos. ; )
Lou
Awesomeness
Sweet. Great work on the mold and first pull! :D
Killer man! Keep it up!
1. spray the mold with mold realease, then sandable primer, makes the pull easier to sand and comes out primed!
2. Not the same but polyESTER:) resin will mechanically and chemically lock with the shell -shock print coat.
3.yes
4. It all depends on who is laying up the glass:DQuote:
Originally Posted by Heatshock
Russ,
Are you doing a layer at a time? If so how do you avoid delamination?
Thanks,
Lou
In the pic above you see a thick print coat of shell-shock, backed by a layer of resin only mixed with aerosil( artificial silica), this makes the resin like toothpaste and gets in good in the deep detail, then backed by two layers of fiberglass. All this is done one right after each other to insure a good bond without delamenation.Quote:
Originally Posted by r24kids
Russ,
Any chance of doing a youtube vid on the process?
Thanks,
Lou
wow Russ - ok soz I questioned u abt FG lids on an earlier pm; does indeed look solid
my only previous experience with FG was early on in this hobby when I got some cheap (most probably) recast stuff - which basically looked like some sheets with the resin all over em. Thin and very brittle.
Also coming from TK background, so only used to ABS/plastics and wasnt sure abt FG
Nate
I use torn pieces of FG matt, not sheets of FG cloth, The matt takes to the contours much better than cloth. I over lap them as I go, wetting and tamping them in the mold with chip brushes, working out the airbubbles. It's takes patience while working quickly to get good evenness before the resin starts to cure, and don't use too much resin all at once,just enough to get it throughly wet.
As far as you-tube?:rolleyes I give away alot of info on the forums, you should be able to get a good idea how it's done, but I might when I get time.
Russ your a beast & an inspiration to us all!Quote:
Originally Posted by DangerRuss
Thanks for sharing your knowledge. Im in ft laud Fl and if I lived near enough id be happy just to watch you and learn as much as I could.
Thanks,
Lou
Thats is a very cool helmet, i may even trade out my bluerelm Halo 2 helmet for this.
The kit is ready! pics of my first two pulls and assembled. The ears bolt on and are positioned as desired. The ear backs need to be glued on and gaps filled in where the ears meet the helm. The clear lense needs to be glued in after painting. $400 for raw kit plus shipping. Waiting for the light kits to be assembled, and will be available for extra cost TBD. Anyone interested please PM me. Thanks,
Russell
:drool PM sent
Oh man, Im so wanting one of these....:wtc:
:thumbupWe are not worthy...we are not worthy!:thumbup
I think doing the entire suit would be very cool, but also super expensive. But quite a challenge non the less.
I am planning on the suit, already have the left shoulder armor sculpted and ready to mold. I'll concentrate on the armor pieces first, then move on the the chest piece and accesories. May even make his cyborg muscles out of urethane rubber skin. But much money and time will have to be spent. I'll keep you posted.Quote:
Originally Posted by CMAnavy
A neck seal to accompany the helmet? :DQuote:
Originally Posted by DangerRuss
Really nice work! I wasn't familiar with the character so I watched the movie. Too cool. :thumbsup
wow, thanks for posting this here russ.
i lurk on the rpf and i was upset that i had to be a member in order for me to view the images of your helmet.
really happy to be able to finally see it.
great work!!!!!!!!!