Just an introduction

  1. #1
    Female_Fett's Avatar
    Member Since
    May 2008
    From
    Seattle, WA
    Posts
    56

    Just an introduction

    So I'm new to the forum and I just realized that I expressed bad forum form by asking a question before even introducing myself. *slaps self on hands*

    Anywho, I'm new to the armor making business, but I'm really excited about it, I've been looking for a new project and I've loved mandos for a long time. Hell I was rping a mando chick before it was even comfirmed that they even existed lol.

    So I'm excited to get to know everyone! I've been a lurker for a while so I was a tad bit shy about poking my head out and saying hi, but I'm glad I have.

    You all seem like a great group and the JB project was amazing so I can't wait to start being a bit more active around here.

    Wishing everyone well and I'll see you guys around the forums!
    Last edited by Female_Fett; May 12, 2008 at 10:17 PM.

  2. #2
    Dougie Fett's Avatar
    Member Since
    Apr 2008
    From
    Carlow, Ireland
    Posts
    295

    Re: Just an introduction

    You've definitely come to the right place. Some super talented people here that can help you out with whatever you need. Welcome aboard!!

  3. #3
    DutchFett's Avatar
    Member Since
    May 2007
    From
    The Netherlands
    Posts
    489

    Re: Just an introduction

    Welcome to the Mando madness!

  4. #4
    Thumper's Avatar
    Member Since
    May 2007
    From
    Novi, MI
    Posts
    113

    Re: Just an introduction

    Welcome. There is a wealth of information here.

  5. #5
    Mojo-Fett's Avatar
    Member Since
    May 2007
    From
    UK
    Posts
    4,783

    Re: Just an introduction

    Welcome aboard FF... Hope you feel very welcome.

    There is a huge amount of knowledge on this forum/community, I'll look forward to seeing your design and development?

  6. #6
    mrgr8ness's Avatar
    Member Since
    Oct 2005
    From
    Central Upstate NY
    Posts
    1,603

    Re: Just an introduction

    Welcome to the board. You are in the right place for building a mando.

  7. #7
    AdmFrancis's Avatar
    Member Since
    Apr 2005
    From
    Germany / Aachen
    Posts
    356

    Re: Just an introduction

    ..welcome to the group ;o)

  8. #8
    Admin Staff webchief's Avatar
    Member Since
    Mar 2002
    From
    Massachusetts
    Posts
    4,702

    Re: Just an introduction

    Welcome to TDH!

  9. #9
    Geo's Avatar
    Member Since
    Aug 2003
    From
    St. Louis, Missouri
    Posts
    1,011

    Re: Just an introduction

    Welcome to TDH and the endless $$$ spending adventure!

    Geo

  10. #10
    Myles's Avatar
    Member Since
    Oct 2007
    From
    Southern, Utah
    Posts
    160

    Re: Just an introduction

    Welcome, your gona have a blast! I guaranty, and if not feel free to give me a good slap.

    OH and if you have any questions, always feel free to ask, someone will know.

    Myles

  11. #11
    TK1455's Avatar
    Member Since
    Nov 2007
    From
    Vancouver, BC
    Posts
    120

    Re: Just an introduction

    Welcome to TDH, you'll find a lot of good stuff here!

  12. #12
    Female_Fett's Avatar
    Member Since
    May 2008
    From
    Seattle, WA
    Posts
    56

    Re: Just an introduction

    Thanks so much for the warm welcome! I really am looking forward to this ^.^ I'm hoping to have a concept picture done by wed. to post up so that I can get comments and crits on if I'm heading in the right direction

  13. #13

    Re: Just an introduction

    I am sorry that it has taken this long to get back to you!

    Welcome!! I think you will like it here

    I used Kwik Sew 3389 as a starter pattern and then adapted it from there. I have used this for Boba and Jango, thus far, but it is not fitted. It is a men's coverall pattern, so this may not be quite right for a fem fett

    Shiruba mentioned a pattern. It sounds more fitted and that may work better for you.

    If I come up with any other ideas, I will definitely send them your way.

    *hugs*
    Debbi

  14. #14

    Re: Just an introduction

    Welcome aboard... to the... board! You'll enjoy it here, everyone is really friendly and helpful. There is alot of experience here to help you in your venture ^_^

  15. #15
    runJEDIrun's Avatar
    Member Since
    Apr 2007
    From
    Silver Spring, MD
    Posts
    850

    Re: Just an introduction

    welcome!

  16. #16
    Female_Fett's Avatar
    Member Since
    May 2008
    From
    Seattle, WA
    Posts
    56

    Re: Just an introduction

    LadySewforus said: View Post
    I am sorry that it has taken this long to get back to you!

    Welcome!! I think you will like it here

    I used Kwik Sew 3389 as a starter pattern and then adapted it from there. I have used this for Boba and Jango, thus far, but it is not fitted. It is a men's coverall pattern, so this may not be quite right for a fem fett

    Shiruba mentioned a pattern. It sounds more fitted and that may work better for you.

    If I come up with any other ideas, I will definitely send them your way.

    *hugs*
    Debbi
    Thanks! And no problem any help is always appreciated! ^.^

    Thanks again to everyone for the welcomes! I hope to have my concept art done maybe even tonight, though I'm having issues desiding what color to use fo the body suit without making the costume look like a mismatch of color lol

Similar Threads

  1. INTRODUCTION to the TDH
    By batmann539 in forum Site Support & News
    Replies: 2
    Last Post: May 31, 2010, 1:16 PM
  2. introduction
    By Fett4reaL in forum The Sarlacc Pit
    Replies: 14
    Last Post: Oct 9, 2009, 8:48 AM
  3. Introduction
    By LilBobaFett in forum Introductions
    Replies: 1
    Last Post: Nov 3, 2008, 9:22 AM
  4. introduction
    By mrbungle in forum Introductions
    Replies: 4
    Last Post: Oct 19, 2008, 3:59 PM
  5. Introduction
    By Ijaat Ka'rta in forum The Sarlacc Pit
    Replies: 3
    Last Post: Jul 11, 2008, 7:43 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •