STUNT ROTJ Fett rifles. Finished rifle up!!
Well gang, It's finally time to get these made. I'm happy enough with the interest shown, as well as the master rifle, to start the selling of these. Here's the details. This blaster will be an entirely rubber and foam combo, similiar to the Scout Blasters seen on the RPF, and on BikerScout.net. Alot of people here helped make that run a huge success, and I want to take a chance to thanks them one more time! Thanks guys and gals! There will be a hollow, square piece of tubing running through the stock, bracket, and up to through the barrel. This is a Plastruct piece, and not only very srtong and tough to break, but light. The rifle will maintain its shapes rigidly, but will also be able to be pressed, squished, bounced, etc. You'll be able to drop it repeatedly without any breakage or ripping. The blaster should weigh about 2-3 pounds. The blaster will be cast in medium grey, trimmed, and FULLY PAINTED and assembled. It will feature a nice, weathered paintjob, with all the blackwash, rusted, and chipped glory that is this rifle. The scope will have a cool little reticle decal on the inside, and the overall rifle will beclearcoated in semigloss. The model now pictured, is the first resin cast of the gun and scope for my own collection. I don't have a Fett suit yet, so this will go on the wall. No sense in doing a foam one for my wall!
Now, the big answer you've all been waiting for, the price. I've had a rough time doing runs with oil upping almost every price involved in this, from plastic to shipping costs. But the little things, like keeping the scope small, and finding a few new ways to use the rubber, I've been able to keep the price AS QUOTED in Febuary, between 120-150. The price will INCLUDE SHIPPING AND HANDLING. The will be a domestic price and a international price. $145.00 domestic, USPS Priority w/ Insurance and Delivery Conformation $165.00 international (all international buyers assume the risk of your rifle being seized :facepalm ) w/ USPS Global Priority w/ Insurance and Customs tracking Paypal only, payable at hotshotdraw@yahoo.com. This is also an excellent contact email for me, as well as rjmartin1701@yahoo.com The first run will have 15 spots, and once those are finished, I'll begin to take more orders if nessacary. The project should take 10-15 buisness days, from start to finish, but that number could change. All the guns will be done at the same time, for beter efficency I'll update here accordingly. Questions are welcome, but be sure to read the thread thouroghly. Thanks for allowing me the oppurtunity to do this, and I hope you guys can hop on board!
1.SandmanUK-------------RE-SHIPPED FRIDAY 11/14
2.Jason1976 (PAID 9/19)--------- SHIPPED 11/12
3. Hal (PAID 10/09)-------------SHIPPED FRIDAY 11/14
4. Bet's on Fett (PAID 10/21)-------SHIPPED FRIDAY 11/14
Well gang, It's finally time to get these made. I'm happy enough with the interest shown, as well as the master rifle, to start the selling of these. Here's the details. This blaster will be an entirely rubber and foam combo, similiar to the Scout Blasters seen on the RPF, and on BikerScout.net. Alot of people here helped make that run a huge success, and I want to take a chance to thanks them one more time! Thanks guys and gals! There will be a hollow, square piece of tubing running through the stock, bracket, and up to through the barrel. This is a Plastruct piece, and not only very srtong and tough to break, but light. The rifle will maintain its shapes rigidly, but will also be able to be pressed, squished, bounced, etc. You'll be able to drop it repeatedly without any breakage or ripping. The blaster should weigh about 2-3 pounds. The blaster will be cast in medium grey, trimmed, and FULLY PAINTED and assembled. It will feature a nice, weathered paintjob, with all the blackwash, rusted, and chipped glory that is this rifle. The scope will have a cool little reticle decal on the inside, and the overall rifle will beclearcoated in semigloss. The model now pictured, is the first resin cast of the gun and scope for my own collection. I don't have a Fett suit yet, so this will go on the wall. No sense in doing a foam one for my wall!
1.SandmanUK-------------RE-SHIPPED FRIDAY 11/14
2.Jason1976 (PAID 9/19)--------- SHIPPED 11/12
3. Hal (PAID 10/09)-------------SHIPPED FRIDAY 11/14
4. Bet's on Fett (PAID 10/21)-------SHIPPED FRIDAY 11/14
Last edited by a moderator: