Blaster Stormrider ESB Sidearm build for Bunicula

BobaFiend

Active Hunter
My good friend down in Athens is finally putting some of the final nails in for his ESB costume. Things are really coming along and as I have some time on my hands these days he's asked me to finish up a few parts for him. I'll go step by step here through the process from prep to paint.

Here's how the sidearm looked after about 20 minutes of rough trimming with an X-acto blade and just a bit of drilling in the trigger area. Overall I think the cast is pretty solid. This is one of Stormrider's foam-filled light trooping sidearms. it's made of a harder outer resin and a much lighter foam filling. It is certainly much, much lighter than the rubberized dankennman blaster I have, but it's a bit fragile.

IMG_2374_zpsc28fe550.jpg


IMG_2375_zpsf74aa193.jpg


IMG_2376_zps0badd931.jpg


IMG_2377_zpse6059631.jpg


IMG_2378_zps382eae4a.jpg


IMG_2379_zps34d40b65.jpg


The parts that need to look good do look very good. All of the logos and maker's marks are well cast and the knurled ends have minimal seams. Since I can't really fill those that is good news. Otherwise, there are pretty deep inset seams that will need to be Bondo'd and sanded smooth before this sidearm sees any primer. The tip of the blaster is its own cast piece and screws onto the end, which I like because it avoids any seams on this part. The threads seem to work alright, and the piece fits very tightly without adhesive. Since the handle is mostly hollow I didn't want to add weight by filling the whole thing up with Bondo so I cut a matching piece of Sintra and glued it in with Zap-a-Gap to seal the handle, then went ahead and filled the seams as necessary.

IMG_2390_zps2e5eee50.jpg


IMG_2395_zps08ed62b4.jpg


IMG_2394_zpsc49195ba.jpg


IMG_2396_zps9e529eb4.jpg


Gonna sand soon and then re-assess. Hopefully I'll be ready for glazing putty without having to do any more major filling. More updates to follow!

Austin
 
Awesome to see another pic intensive build thread here! My Stormrider sidearm should be arriving very soon. I'll be following the steps you provide very diligently!
 
Thank you for taking time to post nice close up pics of your procedure.
I'm helping Stormrider as much as possible ( shipping etc. ) - so any input will help me out too!
It's great to know what you like about the products and if there might be ways to improve.
I look forward to seeing your progress as well as the completed build.
Have fun
And thanks again for purchasing Stormriders ESB
 
"Thank the maker!"

Appreciate you sticking your head in here, Iconic. My biggest recommendation would to cast the tip totally in the outer resin rather than have any foam filling. Since this is all the sticks out of the holster it gets banged around a lot. Hopefully it'll hold up for Bunicula.

And thanks for the comments, glad you're happy with it so far :)
 
Hi,
I hope I am not jumping into a thread that I shouldn't be. However, Ido some of the shipping for Stormrider and I sent that gun out on Dec 2. Wow! Seems like an awful long time. Please IM me when it arrives or if there are any problems.
Did you get the customs reference # ?
I am happy you are excited about it!
 
I assume you're referring to my sidearm? I'm hoping it arrives soon. In fact, I was going to PM Stormrider about it this week. But I never did get any message about it ever getting shipped. If you still have my shipping info on file, I'd really appreciate getting it via e-mail or PM.

And now, back to the sidearm thread. Sorry, Bobafiend.

Hi,
I hope I am not jumping into a thread that I shouldn't be. However, Ido some of the shipping for Stormrider and I sent that gun out on Dec 2. Wow! Seems like an awful long time. Please IM me when it arrives or if there are any problems.
Did you get the customs reference # ?
I am happy you are excited about it!
 
Ooooh now this is gonna be good! I agree the tip is a bit fragile , hope mine holds up . Looking forward to progress here, thanks for posting this Bobafiend!;)
 
It took me quite a bit of work to get those seams filled. I hope you have an easier time than I did. Looking forward to more updates. (y)
 
Update time!

I've completed all the initial sanding. I used 100 grit to knock down the large masses of filler and then came back with 220 to feather the edges down. So far everything is coming together pretty well. There are a few spots that need more filler to come flush with the body, namely the butt of the grip and the area where the trigger guard meets the grip.

IMG_2406_zps0be2a654.jpg


IMG_2399_zps7200d24b.jpg


IMG_2401_zpsb9126841.jpg


IMG_2405_zps8d434592.jpg


IMG_2404_zps38f309e8.jpg


IMG_2403_zps276ab388.jpg


IMG_2402_zps92bbcf7f.jpg


I've also run into a bit of an issue with the interior- once the top layer of the print coat is sanded down the resin shell is rather bubbly. It's not so bad that the prop is structurally unsound, but it will have to be filled again as well.

IMG_2400_zps5bba0b35.jpg
 
For the medium and fine-sized bubbles, go to a plastic model hobby shop. They should carry a liquid gap/seam filler called Mr Surfacer. It's a filler designed to be brushed on with a paintbrush. It's especially useful for the fine bubbles that can appear in resin. Be prepared to do it again after a primer coat; it tends to reveal any off-kilter seams or previously invisible bubbles.
 
Thanks for the tip! I may have to look into it soon, but for this I think I'm going to stick with the Bondo spot and glazing putty I have already.
 
Okay, so I've had some camera issues. My battery died and I have no idea what I did with the charger! This means the step-by-step will be a bit abbreviated since I have to get the big DSLR out to take any shots and it's a real pain.

Filled the big problem areas with more bondo

IMG_2407_zps1ec64e4e.jpg


IMG_2409_zps4e7c5a25.jpg


IMG_2410_zps08476fe6.jpg


Still had a few issues with tiny bubbles, so I went over those 4 or 5 spots with Bondo Spot & Glazing Putty. That was wetsanded down with 320 grit sandpaper. From there, I was ready for paint. I primed the whole gun, and then primed once more. The entire gun got a coat of Rusto Metallic Matte Nickel. After it's dry time I taped off the silver areas and sprayed Krylon Ruddy Brown (which Bunicula and I finally found at Advanced Auto Parts).

DSC_00951_zps3b571b2b.jpg


DSC_0096_zps5f394510.jpg


DSC_00971_zpsa88faa82.jpg


DSC_0098_zpsb4302a97.jpg
 
The final step was weathering! I went back over and hit the high spots with a very small piece of sponge dipped in the same silver spraypaint I used earlier. The trigger was also handpainted with the same paint. Then next up was a light blackwash. This is a mixture of black, grey, and maroon acrylic paints. I water them down and then use a stipple brush along with a wet and dry rag to fade the edges out. Could maybe use a flat clearcoat now to seal everything in, but I'm very happy calling this done!

DSC_01071_zps800a5f92.jpg


DSC_0106_zpsbc75f645.jpg


DSC_0105_zpsee79b8c7.jpg


DSC_0104_zpsc5e0d98e.jpg


DSC_01021_zps61020b14.jpg


DSC_01001_zps37820d3a.jpg


DSC_00991_zps8a1cdeb7.jpg


Thanks for looking!
 
Nice work. I had trouble finding the ruddy brown so I have another color I am going to be using krylon red oxide. I will do a test of it before I try it I the sidearm though.
 
This thread is more than 9 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top