Small discovery regarding blaster greeblie

kurtyboy

Active Hunter
I've been searching for some vintage model kit parts that were used on some Star Wars blasters. During my search I noticed the similarity between the trigger housing detail on the ESB Rebel DH17 and the side greeblie on the Boba Fett ROTJ blaster.

Well, turns out they are one and the same. Flip the Fett greeblie 180°, cut it in half and you get the DH17 greeblie! The reason they don't look identical in the photos is because the model kit part comes in two halves and I couldn't find a good picture of one side, so you're seeing the R side on one blaster and the L side on the other. :)

From top to bottom. ESB DH17 blaster greeblie, Boba Fett ROTJ blaster greeblie.
fett-dh17.jpg
 
Last edited by a moderator:
...guess I'll weigh in here. Yea, it sure looks a lot like a pylon and some sort of item, store, or ejector rack – albeit a primitive sculpt if it's from a kit. That's what I'm going to guess…a crude repro of a multiple ejector rack.
Judging by the pylon, maybe I can help narrow your search (considering a few airframes produced before ESB that might have been in kit form)

1st: What might be worth some research:
F-105 (inner wing pylon), B-52 (external ejector rack - conventional bombs), Hawker Hunter, Tu-16 ...or searching for ALQ-101 or 119 ECM pods (doubtful), Multiple Ejector Rack (MERs), or cruise missiles.

2nd: What it most certainly is not (based on the pylon shape):
A1 Skyraider, A3 Skywarrior, A5 Vigilante, A-6 Intruder, EA-6B, F-4, F-5, F-14, F-15, F-16, F/A-18, T-38, F-84, F-86, F-100, F-101, F-102, F-106, MiG-15, MiG-17, MiG-19, MiG-23, MiG-25, MiG-27, Buccaneer, Mi-24 Hind, Su-7, Su-15, Su-17, Su-22, AH-1, AH-64, F4D Skyray

Then again, which of these aircraft would be in a position to carry such an item on a particular station should be considered. The '105 stands out because of the use of ECM pods and different racks in the Vietnam War, where the Hunter could stand out because it's a British airplane that could have been easily obtained by prop builders in the UK *Fett history buffs: comment here* that could also carry ECM pods and air-to-ground ordnance.

Then again who knows….it might as well be a part from some car model along with the leaf-spring-lookin'-thing in the bottom photo :lol: (for everyone, the part under discussion is on the blaster's right side half-way between the scope and the trigger finger). Ok, that's my 100 cents. whew.
 
Last edited by a moderator:
OK guys, after two weeks of searching dozens of model kits (including all those mentioned above and many more!) I finally found this part!

I will reveal the source very soon...
:D
 
This thread is more than 18 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top