Subscribe
  1. phantom viper's Avatar
    Member Since
    Apr 2003
    Posts
    963
    Dec 23, 2003, 1:32 AM - Sintra made flame thrower #1

    I have recently made this flame thrower for my gauntlets. It still needs to be cleaned up.
    <img src=http://200.72.163.179/cdref/tdh/Armor/sintraflamer.jpg>
    <img src=http://200.72.163.179/cdref/tdh/Armor/sintraflamer2.jpg>


  2. Bobbywan's Avatar
    Member Since
    Sep 2002
    Posts
    554
    Dec 23, 2003, 2:07 AM - Re: Sintra made flame thrower #2

    Nice job man

    Can't wait to see the rest


    ~Bobby

  3. Admin Staff webchief's Avatar
    Member Since
    Mar 2002
    Posts
    4,704
    Dec 23, 2003, 7:22 AM - Re: Sintra made flame thrower #3

    Looks cool!
  4. Member Since
    Nov 2003
    Posts
    458
    Dec 23, 2003, 9:04 AM - Re: Sintra made flame thrower #4

    Looking Good!

    Loranar
  5. Member Since
    Sep 2002
    Posts
    671
    Dec 23, 2003, 11:47 AM - Re: Sintra made flame thrower #5

    Very nice job Phantom Viper!!
    Is there a bottom on those yet? How did you make it? I'm going to have to make this piece for my sintra jango gauntlets so any info is appreciated.
    Thanks.

  6. phantom viper's Avatar
    Member Since
    Apr 2003
    Posts
    963
    Dec 23, 2003, 7:39 PM - Re: Sintra made flame thrower #6

    Thanks guys

    There is a bottom on the longer body but I have yet to put a bottom on the end piece. I first made a template on my computer then printed it out and laid it on the sintra sheets and traced them with a box cutter. I had to do some trimming to the pieces to get them to fit evenly. I forgot to compensate for the . 120" thickness of the sintra when making the templates. But it was not that hard to trim the pieces to fit. For the main body I glued the top and bottom pieces in between the side pieces and for the end emitter piece I glued the top and bottom pieces on top of the side pieces. That way the emitter fits in between the main body for a good fit. I did have to trim the emitter piece to make it even with the bottom.But i have now changed the template so you could glue the top and bottom emitter pieces in between the sides. I used super glue to glue it together. That was a pain in the but. I glued my fingers together a few times before I was finished After I got the pieces together I used a glue gun to reinforce the sides. You may use the templates if you wish. If you have any other questions feel free to ask and i will try to answer as good as i can

    this is what i mean by in between
    <img src=http://200.72.163.179/cdref/tdh/Armor/flamer.jpg>

    Here is the templats with some mods. so hopefully it will be easyer to use.
    <img src=http://200.72.163.179/cdref/tdh/Armor/flamethrowertemplate2.jpg>



Similar Threads

  1. Desperatly need an ESB Flame Thrower
    By purple-sith in forum Boba Fett Costume
    Replies: 0
    Last Post: Jun 8, 2007, 8:36 PM
  2. Real flame thrower?
    By darkjediknight in forum Boba Fett Costume
    Replies: 8
    Last Post: Oct 10, 2005, 5:31 PM
  3. ESB Flame Thrower
    By Kissker in forum Boba Fett Costume
    Replies: 7
    Last Post: Jan 23, 2005, 7:13 PM
  4. ESB GAUNTLET FLAME THROWER
    By AKAI_FETT in forum Boba Fett Costume
    Replies: 7
    Last Post: Feb 19, 2004, 8:19 PM