Shoulder Studs help.

  1. #1

    Shoulder Studs help.

    Before I start drilling holes - can anyone give me an estimate/info on measurements for placement of shoulder studs - i.e/ distance from edge - distance from one another.

    The over the shoulder piece on my armor is 3 1/2 inches long.

    Thanks guys.

  2. #2
    Flettch's Avatar
    Member Since
    May 2008
    From
    Palombia
    Posts
    220

    Re: Shoulder Studs help.

    I'm going to drill as well, but my stuff is already painted. Should I put some tape on the painted side before I drill? What kind of tape would be best for this? Drilling from the painted side and down would be best I believe, but if you have other opinions I'd be eager to hear.

  3. #3

    Re: Shoulder Studs help.

    Flettch said: View Post
    I'm going to drill as well, but my stuff is already painted. Should I put some tape on the painted side before I drill? What kind of tape would be best for this? Drilling from the painted side and down would be best I believe, but if you have other opinions I'd be eager to hear.
    the studs will cover the hole and the area around it, so any damage you may do to the paint won't be visible because the stud will be covering it. And you probably won't damage the paint anyway. You will eventually get more damage just by screwing the studs on and off over time. It'll look more authentic that way anyhow.

  4. #4
    frb13's Avatar
    Member Since
    May 2007
    From
    so. cal
    Posts
    293

    Re: Shoulder Studs help.

    Any masking tape should work fine.

  5. #5
    peanutbutterstrangle's Avatar
    Member Since
    Apr 2008
    From
    Long Island
    Posts
    73

    Re: Shoulder Studs help.

    You can eye-ball it. Equidistant; although be cognizant of the structural strength of your armor... not too close to the edge.

  6. #6
    jwinnington's Avatar
    Member Since
    Apr 2009
    From
    Newark, Delaware
    Posts
    81

    Re: Shoulder Studs help.

    Peanutbutterstrangle is right. Every armor will be a little different so just come in off the sides with an equal distance and in enough from the back to allow for the stud to rest fully on the neck piece. You can also find a picture to go off of. Try this picture.

    http://www.tk409.com/images/photos/dcon/23.jpg

Similar Threads

  1. V 2.0 Aluminum shoulder studs
    By psberetta in forum Boba Fett Costume
    Replies: 1
    Last Post: Sep 27, 2007, 7:01 AM
  2. shoulder studs!
    By CodytheSeparatist in forum Boba Fett Costume
    Replies: 4
    Last Post: May 26, 2006, 11:49 PM
  3. Fett Shoulder/Cod Studs ....11-02-04
    By Rodann in forum Boba Fett Costume
    Replies: 90
    Last Post: Nov 17, 2004, 3:16 AM
  4. Shoulder studs!!!!
    By thksdad in forum Boba Fett Costume
    Replies: 0
    Last Post: Jul 6, 2004, 11:18 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •