hey guys, once again, here i am looking to gain some more of your wisdom...i began my gauntlets this week, and started with the fiberglassing reinforcement....but ya know what? i should have done the hinges first, then the fiberglassing.... learning as i go....so here is the first step...i used regular 12" hinges from lowes, cut them to the length i wanted, then cut slits to get the upper and lower halves to "set down" on the hinge...scissors worked pretty good, they were all i had to cut the gauntlets...then i used just regular screws, couldnt find anything more decorative, so if you any ideas let me know....and used faucet washers and nuts that came with the screws to secure...thanks for the input in advance!!