Page 1 of 2 12 LastLast
Subscribe
  1. Member Since
    Jun 2011
    Posts
    73
    Oct 12, 2011, 9:49 PM - ROTJ Dry Run #1

    Putting together a ROTJ and have a great helmet from AFettfullofdollars and he is painting my jet pack. I painted up my RKD armor and am doing a dry run so my wife can sew my velcro to the vest. Looking for comments on placement/fitment. Please keep in mind this is a dry run. I havent fitted my helmet with padding and the belt,girth and cod were just held in place with rubber bands and my gloves are temporary. Its rough.....just trying to get the chest situated. Any comments would be appreciated, also I weathered the vest a little.....but I think it needs some more grey and maybe blackish dusting?? what do you guys think? BFETT pictures by TK9039 - Photobucket

    Thanks
  2. High Speed Low Drag Fett 4 Real's Avatar
    Member Since
    Jan 2010
    Posts
    5,579
    Oct 12, 2011, 10:48 PM - Re: ROTJ Dry Run #2

    Your vest looks like a Tshirt not a vest there shouldnt be sleeves I'm guessing cucblack vest? I mentioned to him he needs to move the shoulder seem in on the top on the vest to get a better look. The armor looks good pull that ammo belt up its falling down a bit distracting my eyes. But get that vest sleeves sorted out they shouldn't hang low like that
  3. Member Since
    Jun 2011
    Posts
    73
    Oct 12, 2011, 10:53 PM - Re: ROTJ Dry Run #3

    The vest is a TK409...........but Ill see what I can do to adjust. . Do you think it needs more weathering? The ammo belt and girth were literally just hanging there ....so that will get adjusted. Thanks for the help!
  4. High Speed Low Drag Fett 4 Real's Avatar
    Member Since
    Jan 2010
    Posts
    5,579
    Oct 12, 2011, 10:57 PM - Re: ROTJ Dry Run #4

    Dang I didn't know chris's did that I was about to order one. The real test on weathering for the vest is flash photography if it doesn't light up ita good IMHO so I think your good if there was flash involved there? The shoulders are to wide if u follow me. My cucblack vest does that and I was about to order a tk409 vest and neck seal. So maybe I should give him measurements a little to narrow?
  5. Member Since
    Jun 2011
    Posts
    73
    Oct 12, 2011, 11:08 PM - Re: ROTJ Dry Run #5

    Most were with a flash a few were not. Ill dust it a little bit more with some grey. I thought I gave my measurements pretty tight.....so Im not sure on that part.
  6. tekering's Avatar
    Member Since
    Sep 2011
    Posts
    73
    Oct 12, 2011, 11:13 PM - Re: ROTJ Dry Run #6

    The armor and the helmet look fine, but your flightsuit's much too loose in the arms...
    The short sleeves hang too low, and there's too much fabric bunched up between the sleeves and the gauntlets.
  7. Member Since
    Jun 2011
    Posts
    73
    Oct 12, 2011, 11:22 PM - Re: ROTJ Dry Run #7

    I agree and am aware of that part.......when I do final fitments and hoses are installed alot of that will go away. BUT, I do agree. THX
  8. clonecollector's Avatar
    Member Since
    Dec 2007
    Posts
    1,591
    Oct 13, 2011, 8:46 AM - Re: ROTJ Dry Run #8

    Quote Fett 4 Real said: View Post
    Dang I didn't know chris's did that I was about to order one. The real test on weathering for the vest is flash photography if it doesn't light up ita good IMHO so I think your good if there was flash involved there? The shoulders are to wide if u follow me. My cucblack vest does that and I was about to order a tk409 vest and neck seal. So maybe I should give him measurements a little to narrow?
    I have a TK 409 vest too... when it was new it looked just like this shape wise at the top. Its not so bad after a few years. I would give it a washing a few times to take the "newness" out and the shoulders wouldn't stick out. I think I should have given a measurement that was a liitle smaller too. But that's my fault because I measured everything myself. I should have had some oneelse do it.

    As far as shinyness goes... I used gray and black primer (rustoleum gray, krylon black) to dirty up my vest.
  9. Member Since
    Jun 2011
    Posts
    73
    Oct 13, 2011, 12:19 PM - #9

    I'll dry giving it a wash then I'll add a little more mist of grey and black. Thanks for the tip.
  10. redkraytdragon's Avatar
    Member Since
    Apr 2010
    Posts
    1,091
    Oct 13, 2011, 5:14 PM - Re: ROTJ Dry Run #10

    I don't really have anything to add. Looks like everyone else pretty much covered it already. Can't wait to see it all put together proper though!
  11. Member Since
    Jun 2011
    Posts
    73
    Oct 16, 2011, 11:18 PM - Re: ROTJ Dry Run #11

    I updated with some pics of my shoulder pieces. They are not totally done....still need to damage them up a bit. The knees are just stand ins I bought on here and repainted until I build my actual knees these will get me by for now.....then they will get donated to make my wifes custom female mando. BFETT pictures by TK9039 - Photobucket
  12. VaxKordo's Avatar
    Member Since
    Jan 2011
    Posts
    27
    Oct 17, 2011, 4:38 PM - Re: ROTJ Dry Run #12

    looking good.....what blaster is that...if you don't mind me asking?
  13. Member Since
    Jun 2011
    Posts
    73
    Oct 17, 2011, 7:09 PM - Re: ROTJ Dry Run #13

    I actually bought that off someone in my garrison.....someone a few years back was making foam/nerf blasters and selling them here(not sure his name). Its one of his. I dont think he is around anymore, I think there were some issues...not sure. I seen it and thought it was great for trooping. Needed some reinforcing here and there. For what I paid(not much) I will see how it holds up!
  14. Member Since
    Jun 2011
    Posts
    73
    Oct 17, 2011, 10:34 PM - Re: ROTJ Dry Run #14

    Actually I just remembered the name of the maker of the foam/nerf gun....I think it was Hotshot.
  15. AFettFullofDollars's Avatar
    Member Since
    Mar 2004
    Posts
    1,153
    Oct 17, 2011, 11:39 PM - Re: ROTJ Dry Run #15

    That's it. I have one of his too.
  16. Member Since
    Jun 2011
    Posts
    73
    Oct 23, 2011, 11:46 AM - Re: ROTJ Dry Run #16

    Some more pics. I need to tweak some soft parts, some weathering and get it all fastened permanent........its close! I will have this done for my boys halloween party. Still stand knee parts for the knees...............BFETT pictures by TK9039 - Photobucket
  17. VaxKordo's Avatar
    Member Since
    Jan 2011
    Posts
    27
    Oct 23, 2011, 1:00 PM - Re: ROTJ Dry Run #17

    Looking good!!!!
  18. AFettFullofDollars's Avatar
    Member Since
    Mar 2004
    Posts
    1,153
    Oct 23, 2011, 2:13 PM - Re: ROTJ Dry Run #18

    George called. He wants his suit back!
  19. redkraytdragon's Avatar
    Member Since
    Apr 2010
    Posts
    1,091
    Oct 23, 2011, 6:09 PM - Re: ROTJ Dry Run #19

    Outstanding!!
  20. Member Since
    Jun 2011
    Posts
    73
    Oct 23, 2011, 6:51 PM - Re: ROTJ Dry Run #20

    Thanks for the kind words guys(You both had a Huge impact on the suit)! I think its coming along nicely. I did some more today......My wife is going to take in the arms a bit for me to get rid of some of that bunchiness.....and then its done enough for the kids party. I will make few further adjustments and submit for 501st approval. Hoping to debut this at the Thanksgiving Day parade in Chicago!
  21. Member Since
    Jun 2011
    Posts
    73
    Oct 31, 2011, 10:38 PM - Re: ROTJ Dry Run #21

    Well- Besides the "stand in knees" and a little more weathering to the belt pouches and boots..Finding something to install for that little oval thing above the darts...this is where I am at. Let me know what you think?

    Boba Fett Submittal pictures by TK9039 - Photobucket
  22. RafalFett's Avatar
    Member Since
    Oct 2010
    Posts
    2,687
    Nov 1, 2011, 3:52 AM - Re: ROTJ Dry Run #22

    You have an awesome ROTJ suit and it fits you perfectly, not to mention those great Boba stances. But there's one thing that bothers me: the chest lower display is much too red around the characters; you might fix this with a piece of tinted plastic.
  23. Member Since
    Jun 2011
    Posts
    73
    Nov 2, 2011, 12:46 PM - #23

    Thanks for the kind words, I see what your saying about the chest display. I will see if I can tweak that a little.
  24. Member Since
    Jun 2011
    Posts
    73
    Nov 3, 2011, 5:09 AM - Re: ROTJ Dry Run #24

    Suit is 501st approved!!!
  25. RafalFett's Avatar
    Member Since
    Oct 2010
    Posts
    2,687
    Nov 3, 2011, 5:22 AM - Re: ROTJ Dry Run #25

    Quote DJM0072 said: View Post
    Suit is 501st approved!!!
    That was fast! Congratulations to your approval!

Similar Threads

  1. Replies: 0
    Last Post: May 9, 2010, 2:37 PM
  2. Rub n' Buff won't dry
    By Naglium in forum Prop Building Workshop
    Replies: 4
    Last Post: Mar 13, 2010, 3:11 PM
  3. Anyone make custom dry transfers?
    By superjedi in forum The Sarlacc Pit
    Replies: 0
    Last Post: Jul 12, 2009, 9:49 AM
  4. SIGN UP RUN IS A GO MACHINED ROCKET/ MISSILE RUN 4TH RUN
    By RussRep in forum Boba Fett Costume
    Replies: 108
    Last Post: Jun 27, 2009, 10:49 PM
  5. Does JB weld dry better in the heat of the sun...
    By Studio Fett in forum Boba Fett Helmet
    Replies: 4
    Last Post: Jul 26, 2008, 4:58 PM