Plans for my harness system

Ronin677

Well-Known Hunter

• Jun 7, 2007

• #1

Hi guys, just thought i'd run past my harness system idea.

See attached pic - I will have the usual straps coming off the shoulders and passing through the back plate to 'D' clips at the top of the JP (these are not shown on my pic though.

I have gotten hold of an old backpack and removed all except the straps and the back material. I have then added a plate to the back to reinforce it. I have next attached, using brackets, some metal rod bent as shown in the pic. These rods will then slide into tubes on the JP itself (in affect the JP will slot onto the rods.

The JP will then have the shoulder straps to stop it 'falling' backwards.

Will post pics once it is finished

PS sorry for the cruddy pic (whipped up in about two minutes )

 

T

thedustroom

Hunter

• Jun 7, 2007

• #2

Hiya matey!

That's looking like it'll be far more stable than mine is right now - get some pics up ASAP so I can scrutinize!

 

Rich D

Active Hunter

• Jun 7, 2007

• #3

Intriguing. How long are you planning to make the rods?

 

J

Jimmy BufFETT

Well-Known Hunter

• Jun 7, 2007

• #4

Are you still gonna be able to get the straps to go under the vest when ya put it on?

 

Ronin677

Well-Known Hunter

• Jun 8, 2007

• #5

Hi guys

the rods extend upwards 'into' the JP by approx 100mm, and hook under the vest quite nicely. The shoulder straps just slip through the standard holes in the vest and poke out of the back armour as usual.

As you can see i have had to extend the rods slightly lower than the material harness, in order to clear the vest.

Pics will hopefully be available after this weekend.

 

Mojo Fett

Well-Known Hunter

• Jun 8, 2007

• #6

Hey Jon... looks good so far
I'll look forward to your tutorial...

G

 

Ronin677

Well-Known Hunter

• Jun 11, 2007

• #7

Well i done a little work over the weekend and here are the results. I still need to 'tart' it up a bit (cut the ends off the screws etc)

Oh and just the shoulder starps to add

 

GCNgamer128

Sr Hunter

• Jun 11, 2007

• #8

Man Jon, that looks so cool. Good job

 

Ronin677

Well-Known Hunter

• Jun 11, 2007

• #9

Cheers Andy, hopefully this time next week i will have the whole thing sorted and be able to attach the JP onto it. Its all getting rather desperately close Celebration Europe for my liking

 

J

Jimmy BufFETT

Well-Known Hunter

• Jun 11, 2007

• #10

Thanks for posting those pics ... now I think I understand how the mechanism will work.

 

Ronin677

Well-Known Hunter

• Jun 18, 2007

• #11

Well guys, this is how it looks with the JP on. The pic without the flak vest is the first attempt. I then shortened the shoulder straps and took some more pics (with flak vest on).

can you let me know which ones are better. I think the second lot as the Jp is slightly higher up.

 

mandalore697

Active Hunter

• Jun 18, 2007

• #12

I think I just pooped!

That looks amazing mate! 2nd set is definitely the best

 

TeamFett

Well-Known Hunter

• Jun 18, 2007

• #13

Wow! Does this setup keep it from sagging?

 

Ronin677

Well-Known Hunter

• Jun 19, 2007

• #14

TeamFett said:

Wow! Does this setup keep it from sagging?

Click to expand...

No sag at all. The back of the harness system is semi rigid and sits tight against my back. This does not allow the harness to move. Also i have a chest strap to add that extra security. It distributes the weight really well, about 70% of the weight is taken by the back part of the harness, whilst the remaining 30% is taken by the shoulders. Its really quite comfy

 

GCNgamer128

Sr Hunter

• Jun 19, 2007

• #15

That looks so cool Jon! Congratulations on building that

 

Ronin677

Well-Known Hunter

• Jun 19, 2007

• #16

GCNgamer128 said:

That looks so cool Jon! Congratulations on building that

Click to expand...

cheers for that Andy. I'll tell yer, the real buzz about this project is being able to share it with you guys. If other people can get inspiration from my gear, then my job here is done . and usually other peoples kit turns out a lot better than mine (so thats a bonus as well). my dream is to kit the world out as Mandalorians (cripes i'm turning into the High Clam Lord )

 

GCNgamer128

Sr Hunter

• Jun 19, 2007

• #17

That harness looks soo awesome, it looks very simple too! How much did it cost you to set up?

 

Ronin677

Well-Known Hunter

• Jun 19, 2007

• #18

The actual backpack was an old one i had lying around, so no money there. The plastic was an old sign, so no money there. The tube is metal fuel line (from a mate in the truck business), so money there. The metal rod was from work, so no money there. I had to buy the screws which cost me approx $2. So all in all about $2

It was very simple to put together and seems to be more than up to the job.

 

GCNgamer128

Sr Hunter

• Jun 19, 2007

• #19

It looks like I need to go get some metal rod! That looks great and it looks like it might fix my jet pack weight problems, haha. I can wear it for about 6 hours, but it weighs 50lbs at the end of the day.

 

Mojo Fett

Well-Known Hunter

• Jun 19, 2007

• #20

Hey Jon... looking sweet man!
As GCN says it looks very easy yet so practical. can't wait to see it painted up with the JP and even more so in the flesh at CE! keep up the good work bro...

-Gav-