Subscribe
  1. TK-Fett's Avatar
    Member Since
    Oct 2002
    Posts
    1,426
    Sep 24, 2003, 11:12 PM - Merged: Jetpack Weathering #1

    I know how I am gonna try most of the major scratchs and dings on the JP but what is everyone else doin to get that real fine spotted effect all over the JP, is it some type of misting technique or something else?
  2. Jedi-Bob's Avatar
    Member Since
    Mar 2002
    Posts
    1,570
    Sep 25, 2003, 9:27 AM - Merged: Re: Jetpack Weathering #2

    I was going to bring mine outside and lay it out on a big tarp. Climb up the ol' ladder and mista way from like 6 ft with a little flat black and a little smoke gray, etc.

    I too would love to hear some feedback on this topic.
  3. asok's Avatar
    Member Since
    Dec 2002
    Posts
    2,707
    Sep 25, 2003, 2:25 PM - Merged: Re: Jetpack Weathering #3

    Check this out. http://tdh.prop-planet.com/viewtopic...c=6797&forum=9 I just was asking the same thing. I now have some good ideas.
  4. TK-Fett's Avatar
    Member Since
    Oct 2002
    Posts
    1,426
    Sep 25, 2003, 4:40 PM - Merged: Re: Jetpack Weathering #4

    thanks asok but I am looking for the speckled effect that appears over the entire surface of the jet pack it would have to be some kind of paint and not R&B.
  5. Member Since
    Mar 2002
    Posts
    387
    Sep 25, 2003, 9:29 PM - Merged: Re: Jetpack Weathering #5

    You can get that effect with an airbrush. Or you can put some paint on a toothbrush and push (don't pull or you'll get paint all over yourself) it across a dowel or scrap piece of plastic. Practice first though.
  6. BobaFettish's Avatar
    Member Since
    Mar 2002
    Posts
    3,228
    Sep 26, 2003, 9:15 AM - Merged: Re: Jetpack Weathering #6

    An airbrush will give you nice smoked effects, but for the spatter patterns, just use black spray paint. If you barely press down on the valve, it will 'spit' giving you that effect. I highly recommend practicing this before trying it out on your jet pack. The toothbrush technique will work too. Here is how mine turned out.

  7. Member Since
    Mar 2002
    Posts
    387
    Sep 26, 2003, 7:22 PM - Merged: Re: Jetpack Weathering #7

    You can get the spatter effect with an airbrush by lowering the air from the compressor. Then pull back the needle all the way. It's a lot easier to do than using spray paint. If you push just a little too hard, it'll look like your pack was on fire.
  8. Lynn TXP 0369's Avatar
    Member Since
    Mar 2002
    Posts
    1,785
    Sep 27, 2003, 4:34 PM - Merged: Re: Jetpack Weathering #8

    A few things to remember about spray cans and misting and spattering paints, new cans will give you the fine mist pattern because the pressure is the greatest in the can, a can that is almost empty will give you the bigger splatter effects like in Bobas armor because the pressure is just there to make a fine mist. Also do it in short bursts of any where from 8"-24" away from object to get your desired effects.

    HTH,
    Lynn
  9. TK-Fett's Avatar
    Member Since
    Oct 2002
    Posts
    1,426
    Sep 28, 2003, 10:21 PM - Merged: Re: Jetpack Weathering #9

    Hey guys thanks for all the paint tips and the tooth brush thing is a really cool idea. I got the desired effect with my airbrush for now but I think I just got lucky really, either way it turned out good and I will hopefully have pics up soon.
  10. TK-1776's Avatar
    Member Since
    Dec 2003
    Posts
    461
    May 16, 2004, 9:41 AM - Merged: weathering an ESB jetpack??? #10

    Hey Fetts,

    I've sucessfully painted my jet pack and have the appropriate silver showing here and there. But, has anyone weathered theirs further? I was thinking of using some kind of rust colored primer and maybe a light misting of black, but wanted to hear what others thought. Is there a better way of weathering it without fear of messing it up?

    I put 4 coats of chrome paint first, then 4 coats of American Accents Sage Green. Then I took fine steel wool and scraped away the green here and there to show the chrome. What am I missing?

    Thanks!

    John Barrows, Jr.
    TK-1776
  11. Jango_Fett_Jr's Avatar
    Member Since
    May 2002
    Posts
    1,957
    May 16, 2004, 2:19 PM - Merged: Re: weathering an ESB jetpack??? #11

    I misted some black on the thrusters by turning them upside down then blasting a few shots of black and grey on the bottoms. I also took the top rocket off and spratyed some black down the top of the part the rocket goes into.
  12. Jango's kid's Avatar
    Member Since
    Nov 2002
    Posts
    2,517
    May 17, 2004, 12:53 AM - Merged: Re: weathering an ESB jetpack??? #12

    You may want to try the blackwash method that RS suggests??? I've been using this method on all my stuff since Lee posted it in his found color thread, and I really like how it turns out. I plan to do this w/ my JP when I get it, and it looks really good on my armour & gauntlets. Basically, you just ad a small amout of balck acrylicc paint to blue windsheild washer fluid, and apply it to your prop. You can either brush it on, or use a spray bottle. It will darken your paint some, so go slow at first till you figure out how you want the end result to look. gives your stuff a dingy/dirty look, and dulls the paint down some. Hope that helps
    Damian
  13. TK-1776's Avatar
    Member Since
    Dec 2003
    Posts
    461
    May 17, 2004, 7:53 AM - Merged: Re: weathering an ESB jetpack??? #13

    Wow that sounds interesting! I think I'll try it. Thanks!

    John Barrows, Jr.
    TK-1776
  14. Admin Staff obi sean kenobi's Avatar
    Member Since
    Jul 2003
    Posts
    1,115
    Aug 14, 2004, 12:27 AM - Official Weathering Your Jet Pack Thread #14

    Post pics and info here regarding weathering your JP...
  15. Formerly Dubkid Corrose's Avatar
    Member Since
    Sep 2005
    Posts
    157
    Sep 12, 2005, 5:29 PM - Re: Official Weathering Your Jet Pack Thread #15

    I just finished the base colors on my new MLC pack and now its time for the weathering. I like the techniques I used on my old MB but I want to try something different. Even though I used the wal mart shopping list I have seen all over TDH the colors just seem deep and a slight bit dark. Would I benefit from trying to dull down say the blues by misting a lighter blue or just dusting the entire back with like a camo khaki or white?
    Just curious on techniques for lightening some areas

    Chris
  16. Predatormv's Avatar
    Member Since
    Nov 2002
    Posts
    2,199
    Sep 12, 2005, 6:59 PM - Re: Official Weathering Your Jet Pack Thread #16

    I used a color called "Grime" made by floquil, I mixed that with water, now the paint is enamel so it doesn't actually "mix" with water. I then put the "mixture" into a spray bottle and misted it onto my jet pack, then blott it up with a paper towl, it lightens up the colors a bit plus is gives the jet pack a nice dirty look and feel. The paint is weird when it drys it feels like dirt, some will even come off on your hands the first couple of times you handle the thign. You can see it a little in this pic. It makes the lighter color areas in the blue and yellow.

  17. RBF's Avatar
    Member Since
    Jan 2005
    Posts
    2,173
    Sep 13, 2005, 2:40 AM - Re: Official Weathering Your Jet Pack Thread #17

    I used a simple black matt spray can... but I tested some brown, grey and black misting cans on my helmet and that looks alot more convincing.

    so I might actually go at it again with brown and grey at some spots...
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	jetpack finished.JPG 
Views:	833 
Size:	37.2 KB 
ID:	5336  
  18. Formerly Dubkid Corrose's Avatar
    Member Since
    Sep 2005
    Posts
    157
    Sep 14, 2005, 1:24 AM - Re: Official Weathering Your Jet Pack Thread #18

    Hey gang,
    Well I finally unmasked my pack last night and today after work I started the weathering. Im about 80% done with the weathering, then all I need to do is knock out the rocket and nozzles. Before I did any weathering you don't know HOW HARD it was to accept that the orange from the wal mart list was the correct paint to be using. I kept looking at it for a long time, thinking the pack looked too dark, and contemplated several times re-masking with and going over that orange with dark yellow. I but my lip and proceeded with leaving it alone. Only until I got most of the chipping and dirtying done did I realize that the colors were in fact right. I guess it took the lightness of the silver to give it that right look and Im VERY pleased with the work I have so far. I would appreciate any feedback towards my paint work if possible.
    Attached are of course the before (primered 'glass) and what Im up to now in the after shot.

    Chris
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Before01.jpg 
Views:	812 
Size:	45.6 KB 
ID:	5354   Click image for larger version. 

Name:	After02.jpg 
Views:	807 
Size:	60.8 KB 
ID:	5355  
  19. RBF's Avatar
    Member Since
    Jan 2005
    Posts
    2,173
    Sep 14, 2005, 3:28 AM - Re: Official Weathering Your Jet Pack Thread #19

    that looks really cool!!
  20. hapajedi's Avatar
    Member Since
    Sep 2006
    Posts
    330
    Nov 30, 2007, 9:52 PM - Re: Official Weathering Your Jet Pack Thread #20

    Heres my custom pack, before paint and weathering


    and after painted and weathering




Similar Threads

  1. UN-OFFICIAL OFFICIAL SR V2 Helmet Liner / Padding PIC Thread
    By Stormrider in forum Boba Fett Helmet
    Replies: 0
    Last Post: Nov 14, 2008, 1:40 PM
  2. *Official Show off your jet pack thread
    By Star Wars Chick in forum Jango Fett Costume
    Replies: 7
    Last Post: May 5, 2005, 3:22 AM
  3. Official Thread - Stubby (arena) Jet Pack
    By chaucer44 in forum Jango Fett Costume
    Replies: 76
    Last Post: Mar 15, 2005, 2:17 PM
  4. Official Weathering Techniques Thread
    By Migrate from As You Wish in forum Prop Building Workshop
    Replies: 19
    Last Post: Jun 22, 2004, 12:00 PM
  5. Official thread: jet pack glue & filler
    By Migrate from As You Wish in forum Boba Fett Costume
    Replies: 30
    Last Post: Oct 14, 2002, 3:11 AM