Page 1 of 2 12 LastLast

Official Jet Pack Stabilizer

  1. #1
    RussRep's Avatar
    Member Since
    May 2003
    From
    UK
    Posts
    575

    Merged: MACHINED ALI Missile Jetpack Stabilizer

    Hi all i am going to start machining some Ali missile range finders next week and just wanted to know how many people would be intrested in 1. If so please PM or email me cambareng@hotmail.com. Will have pics next week.

    Russ.

    ::edit:: I have changed the title of the thread to accurately reflect the part being machined::/edit::

  2. #2
    RussRep's Avatar
    Member Since
    May 2003
    From
    UK
    Posts
    575

    Merged: Interest thread MACHINED ALI JET PACK STABILIZER Pics

    Hi all well i have some pics today of the finished stabilizer it is machined from ali i have also added a 5 mm taped hole at the bottom to help you attach it. Also at the top the little section with the knurl bit un screws. Any 1 interested in 1 please email me or PM cambareng@hotmail.com I hopefully want to do a run of these but i need 10-15 people . I have about 4 people who want 1. The price for 1 of these SHIPPED is 30 / $48



    Thanks
    Russ.

  3. #3
    SEEKER's Avatar
    Member Since
    Feb 2002
    From
    Chicago, IL
    Posts
    4,362

    Merged: Re: Interest thread MACHINED ALI JET PACK STABILIZER Pics

    very nice!!

  4. #4

    Merged: Re: Interest thread MACHINED ALI JET PACK STABILIZER Pics

    Nicely done, but...HOLY PRICE BATMAN!
    I'd never expect to pay that much for machined doohickey.

    Bobo

  5. #5
    bobagoat's Avatar
    Member Since
    Mar 2002
    From
    downsampling you
    Posts
    1,798

    Merged: Re: Interest thread MACHINED ALI JET PACK STABILIZER Pics

    "whoa!"

    very nice!

  6. #6
    Jedi-Bob's Avatar
    Member Since
    Mar 2002
    From
    Westchester County, NY
    Posts
    1,570

    Merged: Re: Interest thread MACHINED ALI JET PACK STABILIZER Pics

    Yeah, while REALLY cool...a wee bit too pricey for me. I'll have to stick with my resin one.

  7. #7

    Merged: <B>Merged:</B> Re: MACHINED ALI Missile Jetpack Stabilizer

    Looks pretty good, Russ, but perhaps just a tad too tall and thin. It's hard to tell though without side by side pics.

  8. #8

    Merged: Re: Interest thread MACHINED ALI JET PACK STABILIZER Pics

    Yeah I think it's too tall as well, and I believe that the base needs to be a tad thicker?!

    Bobo

  9. #9
    RussRep's Avatar
    Member Since
    May 2003
    From
    UK
    Posts
    575

    Merged: Re: Interest thread MACHINED ALI JET PACK STABILIZER Pics

    Hi Guys it was copied from a resin stabilizer the base is 6 mm thick. The drawing that i got from UKscout is 98% spot on. Pics make it look tall .

    Russ.

  10. #10
    ukscout's Avatar
    Member Since
    Aug 2002
    From
    South Devon UK
    Posts
    297

    Merged: Re: <B>Merged:</B> MACHINED ALI Missile Jetpack Stabilizer

    Hi guys

    Just to let you know i got the scale of the JP Stabilizer from pics on the CD ref web site, i imported the pics into cad which had a ruler one of them and was able to use this to get the scale of it.

    I have bought one for my MLC JP and will post pics soon.

    cheers

    neil
    uk-scoutTB7290
    www.uk-scout.co.uk
    ukbikerscout@hotmail.com


  11. #11
    RussRep's Avatar
    Member Since
    May 2003
    From
    UK
    Posts
    575

    Merged: Re: <B>Merged:</B> MACHINED ALI Missile Jetpack Stabilizer

    Hi Neil ,
    You should get your stabilizer today or tomorrow i posted it first class.
    Many thanks
    Russ.

  12. #12
    ukscout's Avatar
    Member Since
    Aug 2002
    From
    South Devon UK
    Posts
    297

    Merged: Re: MACHINED ALI Missile Jetpack Stabilizer

    russ,

    got it today and i must say the quality is brillant, all i need is my MLC JP to put it on

    once again great job

    cheers

    neil
    uk-scout
    WWW.UK-SCOUT.CO.UK
    ukbikerscout@hotmail.com

  13. #13
    Han Hunter's Avatar
    Member Since
    Feb 2003
    From
    Nr Bristol, UK
    Posts
    953

    Merged: Re: MACHINED ALI Missile Jetpack Stabilizer

    Soon, Neil, soon.

    .........

    Si

  14. #14
    RussRep's Avatar
    Member Since
    May 2003
    From
    UK
    Posts
    575

    Merged: Re: MACHINED ALI Missile Jetpack Stabilizer

    Hi all just to you know i have 5 new stabilizer's in stock .
    Russ.

  15. #15

    Official Jet Pack Stabilizer

    i did a search and no luck.does anyone know the height/diameter of the stabilizer and the base?im putting together a scratchbuilt one and i need some general dimensions,just to put me in the ballpark.thanks in advance.

  16. #16

    Merged: Re: jetpack stabilizer dimensions

    The stabilizer itself is 1 1/8" tall, 5/16" diameter. It rests on a small round washer 1/16" then a larger washer 1/8"

    So total hieght is 1 5/16" inches high.

  17. #17

    Merged: Re: jetpack stabilizer dimensions

    awesome thanks bud

  18. #18
    secol_FETT's Avatar
    Member Since
    Mar 2002
    From
    on the country whit name of chili(aji in spanish)
    Posts
    2,036

    Merged: Re: jetpack stabilizer dimensions

    can you transform those inches to centimeters
    pleeeeeeeeeeeeeeaaaaaaaaaaaaaaaaaaaaasssssseeeeee

    thanks in advance




  19. #19
    mobius's Avatar
    Member Since
    Aug 2003
    From
    Mosfellsbaer Iceland
    Posts
    424

    Merged: Re: jetpack stabilizer dimensions

    The metric system is more accurate, none of that 1/8th something. I got some measurements for my blaster and I had to spent some time just transfering the inches to mm.

    and 1" is 25 mm

  20. #20
    T-Visor's Avatar
    Member Since
    Nov 2003
    From
    Moesko Island
    Posts
    379

    Merged: Re: jetpack stabilizer dimensions


  21. #21
    TK-1776's Avatar
    Member Since
    Dec 2003
    From
    Massachusetts
    Posts
    461

    Merged: Re: MACHINED ALI Missile Jetpack Stabilizer

    Hey Russ,

    I have a set of all of your aluminium parts and they are great, but the stablizer seems quite small to me. From the pictures that I had seen of it, I thought it was larger. I've seen other Fetts while trooping that had larger ones. Are you sure that the size is correct? Don't think I'm unhappy with it or anything like that. It just seems too small.

    John Barrows, Jr.
    TK-1776

  22. #22

    Merged: Scratch Built JP - Cheap and Easy Stablizer

    I found a very easy way to make my stablizer for my JP.

    I used 1 stainless steel washer (OD 1 1/4"), 3/8" OD chrome toilet tubing, and 1 stainless steel knurled nut (3/8" OD).

    The washer had to be drilled out to accept the toilet tubing. Then all that is left is to glue the parts together.

    I ended up having about &#36;7 invested in it, and apart from the chrome being a little too shiny - it is spot on for the original. The only reason the cost is that high, is that knurled nuts cost! One nut can run you about &#36;3.50.


  23. #23
    secol_FETT's Avatar
    Member Since
    Mar 2002
    From
    on the country whit name of chili(aji in spanish)
    Posts
    2,036

    Merged: Re: Scratch Built JP - Cheap and Easy Stablizer

    sound cool
    but where's the pics

    thanks for share



  24. #24

    Merged: Re: Scratch Built JP - Cheap and Easy Stablizer

    Quick - someone send me a digital camera!

    I don't have a way to take pix right now. I changed jobs back in Feb. and lost access to the one I used before. And I'm too far in debt buying Fett stuff to buy one now...


  25. #25

    <B>Merged:</B> Re: Scratch Built JP - Cheap and Easy Stablizer


    Forced Trekker wrote:

    Quick - someone send me a digital camera!
    I got a loaner! Since I couldn't get really close with it, these picures came out a little blurry.

    This is the piping I was talking about along with the knurled nut.


    Simply cut the pipe to the length you want, put glue on the nut, insert the nut into the piping, allow to dry, and you get something like this.


    I apologize for the crappy pix. Bad thing is I couldn't get pic of mine in my JP because I couldn't find it! I think my son may have picked it up




Similar Threads

  1. Official Jet Pack Beacon
    By Migrate from As You Wish in forum Boba Fett Costume
    Replies: 130
    Last Post: Aug 13, 2008, 4:26 PM
  2. Possible Jet Pack Stabilizer Found?
    By Seven in forum Boba Fett Costume
    Replies: 3
    Last Post: Apr 19, 2008, 11:30 PM
  3. Official Jet Pack Symbols
    By VashDstampede in forum Boba Fett Costume
    Replies: 166
    Last Post: Jun 12, 2007, 4:48 PM
  4. Official Jet Pack Greeblies
    By Migrate from As You Wish in forum Boba Fett Costume
    Replies: 30
    Last Post: Feb 25, 2007, 8:19 PM
  5. Official: Painting Your Jet Pack
    By Migrate from As You Wish in forum Boba Fett Costume
    Replies: 178
    Last Post: Dec 16, 2004, 10:23 PM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •