Official Completed Blaster Show Off Thread

  • Thread starter Migrate from As You Wish
  • Start date
M

Migrate from As You Wish

Guest
Here's my scratchbuilt ROTJ blaster. I still need to add some stock plates and I am going to get a new grip sometime but this is it for now.

15290a10.jpg
 
Here is my blaster.

Gun_Finish1.jpg



I have added the fins and side greebles, I will get new pics up soon.
 
Last edited by a moderator:
For my rifle, I used Rustoleum Gray Primer for the base color, with heavy, controlled misting of Rustoleum Red Primer. I weathered it further with Krylon Ultra-Flat Black, and spot detailed by hand with Testors Gray and Flat Black. I know that the stock of the ROTJ blaster was painted too, but the wood stock that I made was just too cool. Other than the paint job and the stock, it's all due to our friendly neighborhood Spiderman. His rifle rocks!
Dcp_0020.jpg

Dcp_0013.jpg
 
Last edited by a moderator:
The ROTJ "SpideyBlaster©" kicks serious butt! Buy one TODAY! :D

http://hiwaay.net/~jethridg/graphics/rifle14.jpg

<font color="#00FFFF">(LED bar graph, slide switch, rifle sling swivel, and side greeblies not included with kit)

I gotta tell you guys... The more I look at it, the more I love that "Black Pearl" paint I used for my gun! :D It's black when it's in low lighting, but develops a metallic "sheen" when a light (or camera flash) hits it. :)
 
Last edited by a moderator:
Finally finished my ROTJ Blaster over the Holidays. It's one of webslinger's VERY nice kits !

The pics aren't too good, but you get the idea !

blaster full.jpg

blaster close.jpg
 
Last edited by a moderator:
Halo,

For my stock I didn't have to use a stain b/c I had a nice piece of hardwood that a nice reddish-brown color to it. For yours (that is wood right?) I'd mix up some acrylic paint, burnt sienna(red/brown) or burnt umber(dk brown) with a little water for a stain. I used some satin finish instead of a varnish. That would look a little too shiny for an old blaster. Oh and resin does need a light sanding to take paint, and I agree that you need to take your time on those fins. Most of my time was spent sanding them so they would be flush to the barrel, you won't regret it!

See, nice and flush!
Dcp_0015.jpg
 
Last edited by a moderator:
Well it has been a work in progress and will be until I get the correct gloves, cape, and eventually an ESB blaster, but here is my latest addition. I received this ROTJ fett blaster in kit form and finally have it all together and ready for a paint job. I know this isn't the correct style blaster for the paint scheme I went with regarding Boba, but hey, in the Special Edition A New Hope, he had the ROTJ weapon, so we have to assume he has many blasters, LOL.
fettblaster.jpg


Anyway, I will post another pic once I have detailed the blaster.

Please post pics if you can of some up close blaster pics, so I can see what some have done regarding weathering of the piece.

Take care,
David
 
Last edited by a moderator:
I kinda was leaning towards a long-range sort of piece, so was quite interested in the longer weapons carried by the Stormtroopers. Unfortunately, a non-functional Kraut MG-34, which the props were built on, runs as high as $1,000 US at times. A bit steep, especially considering how many dishonest baggage handlers there are out there. I opted to scratchbuild my own as a hybrid of the MG-34, and the MG-42. I've taken alot of creative license, but I'm really getting the desired effect. As you can see from the pics, it breaks down. This with the help of a push button like those found on patio umbrella poles. Overall length is 53.5 inches; breaksdown into two equal length pieces for carry/travel.

Still to go;
Scope
Bipod
Trigger
Sling/Harness
Various geegaws, doodads, and greeblies for aesthetic purposes.

CBR1wholelength.jpg

CBR1straightside.jpg

CBR1brokendown.jpg
 
Last edited by a moderator:
Here're my ESB blasters.

The rifle is nearly correct but the barrel end needs to be properly tapered with a flash tube etc. I also need to paint a few details, like gold on the grip etc.

The sidearm is cast from an original Bespin security pistol.

mereel-297.jpg


Phil
 
Last edited by a moderator:
ROTJ Blaster

Here is my BlasTech EE-3 SOTE/ROTJ version

bobablasterview.jpg


I started of with a Resin cast of a real Webley WW I Flair gun, the stock mount was made out of aluminum and the stock it self was made out of wood.
Once I got that by mail, I added a bunzen burner muzzle to it wich gave a super effect when looking in to the barrel.
I then gave the Blaster a Black primer coat next came the gun black paint.
I weathered it with Humbrol model paint a mix of aluminum, silver and gun metal, the stock was weathered with some earth tones
I finished it with a coat of matt varnish and poliched it just a bit to give it that parkerised look real old guns have.
I gave the inside barrel a coat of Hi Gloss varnish to make shure the copper bunzen burner muzzle dosn't go green on me
 
This is so far my Jaster Blaster :D, it's still in the stages of weathering & I'll be adding a strap soon & some grips at the nose of the Rifle.

The Rust part of this Blaster is as the Jaster Mereel Story goes, Jaster's toys were always on the "Older" side of things. He hardly got rid of any of his equipment, let alone his trusty Rifle. That's where the Rust factor comes into play. Pics are as follows, enjoy:

Jaster_blaster.jpg


jaster_blaster1.jpg


jaster_blaster2.jpg
 
Last edited by a moderator:
Well, here it is so far. I wasn't to happy with the darkness of the wood. I didn't want to paint it all black, I like a wood look, just wish it was darker. I haven't weathered it yet. I painted the handles a semi-gloss black because I didn't want it to appear that it was molded to the gun.
pubimage.asp


Love to hear what ya think and any helpful suggestions.

Thanks and have a great Easter and Passover!
 
Last edited by a moderator:
This was my first blaster. I've since built a Spidey kit - see below...

I assembled, painted, and weathered this ROTJ-like blaster from a resin kit. I added the functional scope and used the MOM Photos for weathering reference. Common tempera paints (from a craft store) worked great for weathering. I primered it, then painted flat black. After weathering, I rubbed on some of that wet-black tire spray for cars to shine certain areas for a gun-metal-like appearance without making it too glossy. I love that Reference cd! :D

http://www.TK409.com/images/fett/rifle1.jpg
http://www.TK409.com/images/fett/rifle3.jpg
http://www.TK409.com/images/fett/rifle8.jpg
http://www.TK409.com/images/fett/rifle4.jpg
http://www.TK409.com/images/fett/rifle5.jpg
http://www.TK409.com/images/fett/rifle6.jpg
http://www.TK409.com/images/fett/rifle7.jpg
http://www.TK409.com/images/fett/rifle2.jpg

rifle1.jpg
 
Last edited by a moderator:
Okay, I've done about enough on this baby. I haven't given any thought to the bipod yet, and may or may not add one. At any rate, here she is. I'm pretty happy with it. As you can see, I've added a few things.

BHSRbd.jpg

BHSRcu.jpg
 
Last edited by a moderator:
I think I have the one with the new scope.

Well, I have my blaster finished, following Jedi-Bob's instructions and method, but a little bit tweaked by me. Here it is...

VLPLOFKWGP-FettBlaster0001.png


HXISLLWWYN-FettBlaster0002.png


I primed everything with Automotive gray primer (except for the scope, I took it out before anything else). Then, I sprayed the blaster with Walmart brand Silver and once it dryed I sprayed everything with Flat Black.
For the grips, I used the Krylon Ruddy Brown Primer first, and then the Gloss Black on top, with a soft coat of Matte finish cause it was too sticky before that. After drying, I made the scratches all over (scope on) with a wire sponge.

The stock I painted with Minwax Wood Finish "Red Mahogany" instead of "Jacobean" (they didn't have it at Walmart). I added the details with the same procedure as before for the gun and before installing them in the stock (of course). I went the dowel method to install the stock connector and grips, which I used metal rods instead of wood for more resistance and durability. And the stock is detachable, cause I used Wood Screws to unscrew the stock in case I pack it somewhere for ease and space.

I have to add the "rusty" details later on with Testors Rust to give it a more realistic look, and probably some Flat Gray spots, but not sure. Like Jedi-Bob said before, I don't want it to look like the MoM blaster...too much weathered.

Webslinger...YOU'RE THE BEST!!!:D(y)

Robert
 
Last edited by a moderator:
Here's some more pics of my blaster...
I had the newer type of scope with the connecting bar, but to make mine more accurate I cut the bar with a dremel and spaced the scope mounts wider apart. My grip is a Krylon black gloss while the rest of the blaster is flat black.
Blaster_Collage.jpg


Oh yeah, and I love the working scope!
 
Last edited by a moderator:
Heres a few pics of my Fett blaster

Thanks to RA for the wood stalk and metal grip attachment. the leather strap came from an old beat up Postal bag

330486_2221902488426246019_vl.jpg
 
Last edited by a moderator:
I got bored the other day so I decided to convert these plastics toys, into Bad@$$ sidearms! The pic is kind of crappy cuz I had to use my cheapo digital camera. So what do you guys think?


img_0180.jpg
 
Last edited by a moderator:
This was my weekend project, the whole weekend practically. I wanted it for some upcoming cons that are coming up. This was made to go with my custom fett outfit. The base pieces consist of a droid blaster, downspout gutter, various sized pvc tubing, red plexiglass, assortment of knobs, pc boards, leds and one neon tube. This thing is BIG too, shooting for the intimidating factor. :)


P6010004.jpg

P6010010.jpg

P6020013.jpg

P6030031.jpg

P6030028.jpg

P6030023.jpg

P6030017.jpg

P6030020.jpg

night time lighting of the gun
 
Last edited by a moderator:
This thread is more than 15 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top