Blaster Mythos Sidearm Holster (K-11)

FettSpec

Hunter
UPDATED
(09 Sep 2015)

After further investigation (triggered by Delta13Mike) it turns out the Mythos Fett does not use the Pulce 40 which I once thought it did.

As you can see in the photos below it seems that the side arm that is used by Mythos Fett is actually a Sacros K-11. This side arm was used in the Holiday Special and had some minor appearances in later iterations of Fett.

Sacros K-11 Black Box (Forum).jpg


Mythos Side View - Sacross K-11.jpg
Sacros K-11 Comparison (Forum).jpg

You can see how the tip of the K-11 is visible through the bottom of the Mythos holster.

The dimensions of this side arm would be relatively similar to the Pulce 40 but would certainly not be the same - so any dimensions that anyone has would be of assistance.

Does anyone know someone in the community that produces these or would have the ability to make one?

I have found one for sale but I cant say that I trust the quality but at the end of the day it may be the only option I have. Here is the link: Evolution Props



______________________________________________________________________________________

LEGACY POST
(05 Sep 2015)

As some of you may know I am in the progress of gathering parts for a Mythos Fett.

One of the defining features of this Fett is the ammo belt. Delta13Mike has been given the huge task of building this belt from scratch - using some pictures and sketches as a reference. We have had to use the size of a single ammo pouch in order to size up the accessory pouch and we now have what we believe to be the right size (it is in proportion).


Although we have been able to work our way around some of the dimension issues, without the help of the community, there is one last thing we need and we need the community's help.

The Pulce 40 holster!

The holster on this belt isn't the standard ESB Nemrod Holster - it's a leather holster with a sleek design (as seen below).

Sideshow-Collectibles-Boba-Fett-Mythos-Review-04-Thumb.jpg


This is our problem: We need the dimensions of the Pulce 40 to produce the holster. I do not have a Pulce 40 on hand and the dimensions for the side arm aren't common knowledge/on the forums. The dimension we would need include the length from tip of the barrel to the back of the receiver and the distance from the trigger guard to top of the receiver.

Can anyone help with this issue and provide these dimensions?

Thanks in advance,

- Alex



Accessory Pouch Close Up.png
 
Last edited by a moderator:
What the actual hell Raf!? Once again dropping truth bombs on us here at TDH. Thank you for the link to thread.

I understand that the Pulce 40 is the confirmed screen accurate ESB sidearm and a little part of me feels bad for not going down that road; but I feel as if I need to do the Mythos as it appears on the statue.

Thanks again Raf for sorting me out once again! :cheers
 
Not to derail but the Sacros K-11 that was depicted in the Holiday Special cartoon has a different look to it.

This was my interpretation of the cartoon based Sacros K-11 that I was asked to model up to be 3D printed for RexGetz, which who assembled & finished the piece.

Boba-Fett-Holiday-Special-Screencap-61.jpg


Boba-Fett-Holiday-Special-Screencap-62.jpg


Sacros_K-11_Views.jpg


Sacros K-11.jpg
 
Thanks RafalFett, there are only a few views of the gun in the cartoon so had to use some artistic liberties. RexGetz wanted it to look like the cartoon but also have a real world feel for his Holiday Special Boba Fett build.
 
Last edited by a moderator:
Not to derail but the Sacros K-11 that was depicted in the Holiday Special cartoon has a different look to it.

This was my interpretation of the cartoon based Sacros K-11 that I was asked to model up to be 3D printed for RexGetz, which who assembled & finished the piece.
Spot on toolguy - I stumbled over your 3D prints when I was googling the Sacros after Delta13Mike informed me that the mythos didn't use the classic ESB sidearm.

Great work modeling that sacros without any 3D depictions. I have seen a couple of other attempts during my research that didn't turn out as nice this one.

I am currently thinking that I'll ask Woodchuck if he could recreate the body of the K-11 (Mythos not HS) and I'll stain and varnish the wood myself. Then i will have to see if someone can spin up an aluminum barrel that can be set into body to absolutely set it off in terms of realism.

Thoughts?
 
This thread is more than 8 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top