UPDATED
(09 Sep 2015)
After further investigation (triggered by Delta13Mike) it turns out the Mythos Fett does not use the Pulce 40 which I once thought it did.
As you can see in the photos below it seems that the side arm that is used by Mythos Fett is actually a Sacros K-11. This side arm was used in the Holiday Special and had some minor appearances in later iterations of Fett.
You can see how the tip of the K-11 is visible through the bottom of the Mythos holster.
The dimensions of this side arm would be relatively similar to the Pulce 40 but would certainly not be the same - so any dimensions that anyone has would be of assistance.
Does anyone know someone in the community that produces these or would have the ability to make one?
I have found one for sale but I cant say that I trust the quality but at the end of the day it may be the only option I have. Here is the link: Evolution Props
______________________________________________________________________________________
LEGACY POST
(05 Sep 2015)
As some of you may know I am in the progress of gathering parts for a Mythos Fett.
One of the defining features of this Fett is the ammo belt. Delta13Mike has been given the huge task of building this belt from scratch - using some pictures and sketches as a reference. We have had to use the size of a single ammo pouch in order to size up the accessory pouch and we now have what we believe to be the right size (it is in proportion).
Although we have been able to work our way around some of the dimension issues, without the help of the community, there is one last thing we need and we need the community's help.
The Pulce 40 holster!
The holster on this belt isn't the standard ESB Nemrod Holster - it's a leather holster with a sleek design (as seen below).
This is our problem: We need the dimensions of the Pulce 40 to produce the holster. I do not have a Pulce 40 on hand and the dimensions for the side arm aren't common knowledge/on the forums. The dimension we would need include the length from tip of the barrel to the back of the receiver and the distance from the trigger guard to top of the receiver.
Can anyone help with this issue and provide these dimensions?
Thanks in advance,
- Alex
(09 Sep 2015)
After further investigation (triggered by Delta13Mike) it turns out the Mythos Fett does not use the Pulce 40 which I once thought it did.
As you can see in the photos below it seems that the side arm that is used by Mythos Fett is actually a Sacros K-11. This side arm was used in the Holiday Special and had some minor appearances in later iterations of Fett.
You can see how the tip of the K-11 is visible through the bottom of the Mythos holster.
The dimensions of this side arm would be relatively similar to the Pulce 40 but would certainly not be the same - so any dimensions that anyone has would be of assistance.
Does anyone know someone in the community that produces these or would have the ability to make one?
I have found one for sale but I cant say that I trust the quality but at the end of the day it may be the only option I have. Here is the link: Evolution Props
______________________________________________________________________________________
LEGACY POST
(05 Sep 2015)
As some of you may know I am in the progress of gathering parts for a Mythos Fett.
One of the defining features of this Fett is the ammo belt. Delta13Mike has been given the huge task of building this belt from scratch - using some pictures and sketches as a reference. We have had to use the size of a single ammo pouch in order to size up the accessory pouch and we now have what we believe to be the right size (it is in proportion).
Although we have been able to work our way around some of the dimension issues, without the help of the community, there is one last thing we need and we need the community's help.
The Pulce 40 holster!
The holster on this belt isn't the standard ESB Nemrod Holster - it's a leather holster with a sleek design (as seen below).
This is our problem: We need the dimensions of the Pulce 40 to produce the holster. I do not have a Pulce 40 on hand and the dimensions for the side arm aren't common knowledge/on the forums. The dimension we would need include the length from tip of the barrel to the back of the receiver and the distance from the trigger guard to top of the receiver.
Can anyone help with this issue and provide these dimensions?
Thanks in advance,
- Alex
Last edited by a moderator: