My Rattlecan FettPride Gauntlets

Okay guys, don't be too hard on me. It's my first time to do something like this and I am an engineer, not a painter or artist. Also, I was not going for a strictly movie accurate version. I used the reference pictures as a guide and then just had some fun with it. Thanks to Slave1Pilot and Stoormtrooper Guy. I used both of your tutorials extensively. Also, thanks Chris for your help through the PMs. You're all Legends in my book. (y)(y)

I installed a working laser in the left gauntlet nozzle housing. It is triggered by the toggle switch as opposed to the momentary switches. I fabricated some internal brackets for the laser housing so that the bottom panel could be removed easily to access electronics (mostly for battery changes). The rocket is an FP rocket too. I can't believe how realistic it came out using Nathan's tutorial. (y)

Anyway, I think it looks good for a first timer. What do you guys think? :confused

DSCN0464.jpg


DSCN0468.jpg


DSCN0470.jpg


DSCN0471.jpg


DSCN0476.jpg


DSCN0477.jpg


DSCN0478.jpg


DSCN0480.jpg


DSCN0493.jpg


DSCN0494.jpg


DSCN0440_2.JPG
 
Last edited by a moderator:
You're kidding me right ? First time ? You painted these better than I painted my own :lol: Holy cow man, I gotta say that the weathering and detail looks closer to the exhibit photos than I think I've ever seen ???? :confused Seriously. Fantastic is about all I can say :wacko

Uhm, you painting a helmet anytime soon ?? You're going to raise the bar if this is any indication :cheers

Chris
 
Thanks Chris. You are too kind. I'm just glad the feedback so far as been positive. I'm looking forward to seeing the new bucket, although painting of that caliber is probably best saved for the pros (Slave1Pilot, Wickerbeard, etc). I wouldn't even know how to start an airbrush. Gaunts are probably at my limit because they are essentially one color painted over a base metallic color (with some primer in between). If you can use latex mask, you can make the gaunts. Just used the Floquil Grimy Black to weather. And off course some Scotch-Brite pad for the to rocket.
 
Last edited by a moderator:
Stormtrooper Guy Tutorial (used for selection of rattlecan colors and masking technique - latex liquid mask for big bits and non-missile chipping and used a silver paint marker to do specs and tiny scars)
Note: I used a black primer instead of flat black paint as the base for the Claret Wine coat. This helps with adhension to the Sterling Silver base spray. Also used Floquil Grimy Black for dusting overspray to weather.
http://www.thedentedhelmet.com/showthread.php?t=27235

Slave1Pilot Tutorial for Ganutlets (used this for subtle weathering, switches, and particularly the missile:
http://www.thedentedhelmet.com/showthread.php?t=26488&
 
First off bro, thanks for the mention, and second...those look fantastic, and very realistic which makes me all warm and fuzzy inside.lol.I especially love the missile.
Seriously awesome job my man!!!
 
Thank you..... yep, just spray cans and liquid latex. Seems I've done at least one part right. I can only imagine how ****** they would have looked without TDH tutorials. Great little community here.
 
This thread is more than 14 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top