MPP Measurements Templets for ESB Blaster

  1. #1
    Seven's Avatar
    Member Since
    Aug 2002
    From
    Salem, Oregon
    Posts
    606

    MPP Measurements Templets for ESB Blaster

    OK, I obtained a Master Replica MPP flash for my Fett ESB blaster. So I am thinking about anyone who is making one out of a plumbing tube. These are the measurements of the MPP that I took. Length, hole size/placement; oval diameter/length etc. Red lines are the center. I divided the flash into four sides starting from the Top of the flash around to the back (By this i mean how the flash is positioned in the blaster). The circle measurements is the Diameter, and placement lines is to the center of the circle. Anyone else with a real MPP tell me how close I did and this replica is to the real deal. Hope this helps. Oh and please note the drawings are not drawn to scale.

    Added two PDF Blueprints drawn in Metric and to Scale
    Attached Thumbnails Attached Thumbnails mpptop-jpg   mppfront-jpg   mppbottom-jpg  

    mppback-jpg  
    Attached Files Attached Files
    Last edited by Seven; May 7, 2014 at 10:20 AM.

  2. #2
    rdpmackie
    Guest

    Re: Make your own MPP, Measurements pics add hear!

    How about editing the title so it's not so misleading. You are going to get a bung of people that are looking for measurements, not people that already have measurements.

  3. #3

    Re: MPP Measurements for ESB Blaster

    this is great!im using a plumbing tube and i wasnt too sure as to the placements of the holes.one quick question though:as you stated the first pic is the top, so does that make the next pic the left side or right?

  4. #4
    Seven's Avatar
    Member Since
    Aug 2002
    From
    Salem, Oregon
    Posts
    606

    Re: MPP Measurements for ESB Blaster

    It goes Top, Front, Bottom, Back, as seen in most, if not all, reference pictures. So the second picture the right side we always see.

  5. #5

    Member Since
    Oct 2002
    From
    Spring, TX (N.Houston)
    Posts
    76

    Re: MPP Measurements for ESB Blaster

    Nice template Seventhz.

    I haven't got an MPP/replica to compare it to, but I compared it to a photo I have that shows the top of a bare MPP tube with a ruler beside it. It looks very good indeed.

    The only difference I could see was the placement of the "E" between the two top ports - the real MPP appears to be centered.

    I know I'm not the only one who appreciates you posting your templates.

    Thanks

    Steve

  6. #6
    Seven's Avatar
    Member Since
    Aug 2002
    From
    Salem, Oregon
    Posts
    606

    Re: MPP Measurements for ESB Blaster

    Just checking up on this, and thought I would repost the images since they went to red x's.

    Has anyone actually tried to make a MPP replica using these dimentions? any information or pictures would be great.

Similar Threads

  1. Rex Pauldron Measurements?
    By christssoldiers in forum Star Wars Costumes
    Replies: 2
    Last Post: May 27, 2010, 12:46 PM
  2. Stormtrooper measurements
    By Noturno in forum Star Wars Costumes
    Replies: 7
    Last Post: Dec 2, 2008, 7:20 PM
  3. MR blaster measurements
    By WelderTim1208 in forum Jango Fett Costume
    Replies: 5
    Last Post: Aug 24, 2006, 6:33 PM
  4. anyone got helmet measurements?
    By tk421fox in forum Boba Fett Helmet
    Replies: 3
    Last Post: May 3, 2006, 11:41 PM
  5. Jet Pack Measurements
    By ACSS2 in forum Boba Fett Costume
    Replies: 3
    Last Post: Nov 17, 2004, 6:42 AM
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •