Re: MOW rocketpack prep info
i just got mine, and i removed the casting flash, drilled holes for the thrusters, installed a screw on the bottom of the rocket so i can bolt it on from the inside, drilled a hole for the light, used a drill bit to clean up the tiny holes on the rocket. i guess that should be the minimum you should do to your jet pack. then it all depends what else you want to install on your jet pack. but once you did all that, you can have it painted. when using sandpaper don't go to coarse. if you sand your jet pack you can use coarse to get things in shape quick, but you always need to sand with finer paper afterwards. i used 100 to get rid of the flash, and resanded the entire pack with 240, then 320 then 400.