MOW Jet Pack ESB Build-Up!

I got my awsome MOW jet pack in the other day and wanted to share my progress!

I started off by cutting out the supplied template and drilled out the openings for the nozzles. I drilled a pilot hole, then used a 3/4" auger bit and then used a dremel to get the final opening of 1".

Template:
http://i9.photobucket.com/albums/a98...t/IMG_0748.jpg

Final product after dremling:
http://i9.photobucket.com/albums/a98...t/IMG_0750.jpg

Test fit:
http://i9.photobucket.com/albums/a98...t/IMG_0751.jpg

I then built the nozzle bracket as per MOW's thread out of 3/4" PVC pipe. I only used a little over a foot but I could only find the stuff in 10' lenghts and I have alot of extra pipe now. I did a test fit to make sure it all went to gether nicly and then installed in the JP. I did not glue the parts as I intend to keep the nozzles removable for easy transportation.

Completed assembly:
http://i9.photobucket.com/albums/a98...t/IMG_0759.jpg

I then moved on to the Beacon and stabilzer: Instead of the suppled parts I used my psberetta parts from the run he did last year (I belive the short beacon is the one I have) , and they fit perfectly. I have not installed a light yet but that is comming.

http://i9.photobucket.com/albums/a98...t/IMG_0758.jpg

Next, I needed some brackets so I went kind of accurate "J" brackets. I looked for some pre-made brackets but I did not find any. So I used some 1 1/2" wide flat brackets and bent them to into the "J" shape and then bent part of it out about 15 degrees or so. I really eye balled this as I have never done it before. I then bolted each bracket to the JP with four bolts.

http://i9.photobucket.com/albums/a98...t/IMG_0763.jpg

http://i9.photobucket.com/albums/a98...t/IMG_0762.jpg

For attaching the rocket I went with somthing a little different also. I like magnets and my clone has around 40 of them, so I thought why not magnets to hold on the rocket too?

I used some nice flat 1/2" supermagnets, one on the bottom of the pack and the other in the rocket. On the rocket I used an auger to create a bed for the magnet so it sits flush and then glued it in place. I used E6000 glue and a few hours later I put in in the rocket and then shook it to see if it came apart. The magnets did not, but the glue did (usualy needs 24 hours +) but it worked and I will try it a few times before changing it up.

http://i9.photobucket.com/albums/a98...t/IMG_0765.jpg

Also on the rocket, I felt that the holes could be a little nicer so I used a 1/16" bit and drilled each of them out and it really helped the look

http://i9.photobucket.com/albums/a98...t/IMG_0754.jpg

Later I did a bit of sanding and filling and then more sanding and it is in primer right now. I hope to get the green down tomorrow.

One last pic, all built before being taken apart for painting.

http://i9.photobucket.com/albums/a98...t/IMG_0761.jpg

Great work, thanks for sharing.

Really cool!! Nice interesting concept with the magnets, I wouldn't have thought about that :) How strong is it?

Gorgeous buildup! I can hardly wait to see the paint being laid down:thumbsup:fettesb

Nice build up...:thumbsup

Can you post close up pics of the Rocket?? Thanks:)

I'll get some pics of the rocket this afternoon. I sprayed it silver but I really did not like the look so I have to strip it off.

The magnets are quite strong, I would say around a 5lb pull or so. You cna shake the pack upsidedown and it won't come out.

Super job there. That's a nice idea with the magnets as well.

Quote:

---

Originally Posted by CMAnavy

I'll get some pics of the rocket this afternoon. I sprayed it silver but I really did not like the look so I have to strip it off.

The magnets are quite strong, I would say around a 5lb pull or so. You cna shake the pack upsidedown and it won't come out.

---

I'll have to keep that in mind when I get my jet pack :)

Okay I got alot done today. I burned thorugh several bottles of Meduim Green.

First Up are some pics of the rocket, I sprayed it a sliver that I did not like so I had to take most of it off and replaced with Rub'n buff.
http://i9.photobucket.com/albums/a98...t/IMG_0805.jpg
http://i9.photobucket.com/albums/a98...t/IMG_0806.jpg

Befor painting I put down some Rub'n Buff on the pack and rocket, then masked it off and started painting. I also painted my back plate and touched up the color and right gauntlet.

http://i9.photobucket.com/albums/a98...t/IMG_0808.jpg

After every thing dried (I was repainting a BKBT Jango while waiting) I reinstaled the beacon, stabalizer and decal. Just the trim painting and weathering to go!

With Flash:
http://i9.photobucket.com/albums/a98...t/IMG_0819.jpg
No Flash:
http://i9.photobucket.com/albums/a98...t/IMG_0820.jpg

Can't wait to see until it's all done :)

:thumbsup

nice work sir.

Thanks for posting this! Great Job! This is my first pack and you have given me some great ideas, especially with the magnets. Where do you find those types of magnets? I can't wait to get started on this!

I am almost done. Just some touch ups and weathering left.

http://i9.photobucket.com/albums/a98...t/IMG_0844.jpg

http://i9.photobucket.com/albums/a98...t/IMG_0847.jpg

http://i9.photobucket.com/albums/a98...t/IMG_0845.jpg

Nice work so far....MORE PICS!!:thumbsup

Agreed!!! Nice work do far! BUT: you're definately gonna need to do some HEAVY weathering on that sucker. (I realize you are not to that point yet with your work...but just wanted to emphasize) If I may be so bold, I would suggest heavy grey misting. I can't judge for shure at this point....would like to see some outside pics in natural light...but IMO, it looks to be a tad on the green side. Dull it down some & I think you'll nail it!! ;) Post more pics!! :)
D

I like it!

How does the paint stick to the Rub n Buff? Seems like it would lift off...

I suggest using Burnt umber to weather it.

So far the paint has not had a problem sticking.

I did not paint anything today but rigged up a harnes and worked getting it through the vest and mounted the armor.

How is the fit? It might be a little low and I will be attaching the divers belt to the pack, I just have not gotten that far yet.

http://i9.photobucket.com/albums/a98...t/IMG_0873.jpg

http://i9.photobucket.com/albums/a98...t/IMG_0874.jpg

Raise it 3-4" and you're set ;)

Looking good CMA :)

Like GCNgamer said it's mounted a little low, but other than that it looks great. I may have to try using Rub'n buff as a base coat.

Yeah, seems to be hanging a tad to low...BUT MAN I love the size and shape of that thing!!...:thumbsup

Well, thanks to Jango's kid I realize my pack it s bit green. I would do a repaint but I can't get enough of the color I need for at least 3-4 weeks. So I am moving forward with the weating of the pack. I plan on a few washes but here is the first wave of weathinging.

Flash:
http://i9.photobucket.com/albums/a98...t/100_3483.jpg

No Flash:
http://i9.photobucket.com/albums/a98...t/100_3484.jpg

I have not really touched the rocket as I don't really know what to do on it.

The weathering turned out really nice!!

Berry nyce!

I repainted the entire pack the proper color. But I forgot my cammera.

I am going to install the light and post pics tomorrow. :cheers

I repainted my pack the correct color green. Instead of a total strip down I airbrushed the new color on top of the medium green. I also added the beacon light. It is now complete!

http://i9.photobucket.com/albums/a98...t/IMG_1036.jpg

http://i9.photobucket.com/albums/a98...t/IMG_1038.jpg

http://i9.photobucket.com/albums/a98...t/IMG_1037.jpg

http://i9.photobucket.com/albums/a98...t/IMG_1041.jpg

http://i9.photobucket.com/albums/a98...t/IMG_1039.jpg

uuuwwwhhaaaaa!!!!!! PERFECT!!!!!!! I mean...PERFECT!!!! You nailed it bro!!!! Now aren't you glad I bugged you about that color??? ;)
D

Nailed it is right!! You did a great job!!

OK, I'm sorry, (don't usually do this,) but I gotta chime in again!!!!! That pack is stunning....both the pack itself, & the paint job!!! wonderfull piece!!!! I'm gonna half to say its one of the best ESBs I've seen!!!!! Blows mine outta the water!! ;)
D

Thanks again folks and a big thanks to Jango's Kid. He pointed me at the right color. I almost cryed when I found out I had the wrong color. But the repaint went well and the medium green under the RLM gives it a nice contrast.

On the dark weathering Tamaya makes these "wheathering Packs" that look like make-up compacts. They are excellent.

WOW, WOW, WOW!!! :wacko

That color did it! It really is perfect now. You should be very happy with that one. Great work :thumbup

What did you use on the endcaps for the jet nozzles? Is that more rub n buff?

And what was the final color you used?

Quote:

---

Originally Posted by CMAnavy

http://i9.photobucket.com/albums/a98...t/IMG_1036.jpg

---

Are you Filling it with Gas? ;) :lol
Just Kidding!!
Looks Awesome! Love the New Green!
Wayne

I thought about putting a gas system in it but it is way beyond me. I had to put it on that in order to get it in the light, we are loosing daylight fast up here.

The newest green is RLM 62 green.

:cheers

Looks great CMAnavy! Hopefully in January I'll have some cash for my jet pack!

Can you post an image of the other side of the pack, specifically how the divers belt attaches?

Thanks

Phil

Quote:

---

Originally Posted by hellopike

Looks great CMAnavy! Hopefully in January I'll have some cash for my jet pack!

Can you post an image of the other side of the pack, specifically how the divers belt attaches?

Thanks

Phil

---

Sure it might be a day or two before I can get to it. I used some chicago screws to attach the belt. Two holes in the belt and two in the pack, insters screws and thats it.

Great job on that pack, looks great!!!!!!!!!! :thumbsup