Page 2 of 3 FirstFirst 123 LastLast
Subscribe
  1. fettpride's Avatar
    Member Since
    Mar 2002
    Posts
    2,654
    Jan 3, 2008, 9:31 AM - Re: Lucksy31's FP3 Armor Progress #26

    Internal Server Errors - double and triple post
    Last edited by fettpride; Jan 3, 2008 at 9:38 AM.
  2. fettpride's Avatar
    Member Since
    Mar 2002
    Posts
    2,654
    Jan 3, 2008, 9:36 AM - Re: Lucksy31's FP3 Armor Progress #27

    Thanks for the backup Brian I tried to speak up before it was painted

    I knew something didn't look quite right. But nevertheless, the offer of the replacement part still stands. On me. I can have it shipped immediately due to your time constraints if this helps.

    And just a note for "GP", the slot "impressions" even though a general guide to cut, they are more based on Shackman's lights. That's what was available at the time. Of course, they're made to Brak's specs. When you said they were Chris' lights, I shut up and "moved along" ... as I've never owned a set and didn't know what to say Glad to know that it was just a simple misunderstanding. I wouldn't have thought Chris' would have been "off" at all. Good to hear

    My goodness the forum is really "choking" tonight ! Internal server errors up the wazooo !!! It's taking me forever to post this !!!!!!!!

    FP
  3. Lucksy31's Avatar
    Member Since
    Apr 2007
    Posts
    2,225
    Jan 3, 2008, 9:49 AM - Re: Lucksy31's FP3 Armor Progress #28

    FP, you ARE the man!! Many thanks for your generosity and your superior products!!!

    PM sent with the addy!!!
  4. superjedi's Avatar
    Member Since
    Jul 2003
    Posts
    4,369
    Jan 3, 2008, 2:48 PM - Re: Lucksy31's FP3 Armor Progress #29

    Hi Scott,
    If you're getting a new chest piece from FP, here's a little diagram I made to take the chest light measurements. Hope this is understandable.



    When you're measuring the bottom segments, just measure the part where the LED segments will actually show. Does that make sense?
  5. Sixxgunn13's Avatar
    Member Since
    Mar 2002
    Posts
    1,585
    Jan 3, 2008, 8:01 PM - Re: Lucksy31's FP3 Armor Progress #30

    sorry for the hijack

    nice work so far!
    Last edited by Sixxgunn13; Jan 3, 2008 at 11:02 PM.
  6. Lucksy31's Avatar
    Member Since
    Apr 2007
    Posts
    2,225
    Jan 3, 2008, 8:56 PM - Re: Lucksy31's FP3 Armor Progress #31

    OK, here goes:

    A= 1.63in
    B= 0.15in
    C= 0.35in
    D= 0.30in

    I double checked these numbers, so hopefully this is on the money.


    Quote superjedi said: View Post
    Hi Scott,
    If you're getting a new chest piece from FP, here's a little diagram I made to take the chest light measurements. Hope this is understandable.



    When you're measuring the bottom segments, just measure the part where the LED segments will actually show. Does that make sense?
  7. superjedi's Avatar
    Member Since
    Jul 2003
    Posts
    4,369
    Jan 4, 2008, 3:47 AM - Re: Lucksy31's FP3 Armor Progress #32

    Cool! Thanks for the new measurements.

    UPDATE: January 3rd

    Well, it's way too late for pics tonight (I'll get some tomorrow or Saturday at the latest), but I've pretty much completed everything I can do until I receive Scott's decals.
    I have done the right (dented) shoulder, and half of the left shoulder. I'll have to wait for the decal to place the remainder of the damage.
    Same thing with the right chest plate. Just waiting for the decal to finish detail painting the upper portion of the piece.

    I could do the black misting, but I'm also waiting till the new left chest plate arrives. I like to mist all my pieces at the same time. That way, it'll be consistent.
    Hopefully the decals will arrive soon!
  8. fettpride's Avatar
    Member Since
    Mar 2002
    Posts
    2,654
    Jan 4, 2008, 12:23 PM - Re: Lucksy31's FP3 Armor Progress #33

    Hey guys, the left plate replacement was sent out yesterday ... it should be there no later than Monday. But I would think there is a good possibility it could be there Saturday, it's a particular zone that's pretty speedy, and it's west coast like me, no brainer



    FP
  9. Lucksy31's Avatar
    Member Since
    Apr 2007
    Posts
    2,225
    Jan 4, 2008, 1:07 PM - Re: Lucksy31's FP3 Armor Progress #34

    FP, it's been said before but YOU ARE THE MAN!!! Thanks again!
  10. Mojo-Fett's Avatar
    Member Since
    May 2007
    Posts
    4,783
    Jan 4, 2008, 1:08 PM - Re: Lucksy31's FP3 Armor Progress #35

    This is some great community spirit right here!! nice one guys...
  11. Lucksy31's Avatar
    Member Since
    Apr 2007
    Posts
    2,225
    Jan 4, 2008, 1:20 PM - Re: Lucksy31's FP3 Armor Progress #36

    Mojo,
    In my short time here, i've seen NOTHING but UNBELIEVEABLE community spirit. FP and SUPERJEDI are just (2) of the many class acts that I've had the pleasure of dealing with. Thanks again guys!!
    -Scott
  12. Mojo-Fett's Avatar
    Member Since
    May 2007
    Posts
    4,783
    Jan 4, 2008, 1:29 PM - Re: Lucksy31's FP3 Armor Progress #37

    I know what you mean Scott...
    Your a lucky fella, (2) guys like these looking out for ya. Your Armour is gonna look so sweet bro.
  13. superjedi's Avatar
    Member Since
    Jul 2003
    Posts
    4,369
    Jan 6, 2008, 6:51 PM - Re: Lucksy31's FP3 Armor Progress #38

    UPDATE: January 6th

    OK, didn't get a chance to get any pics yesterday, but things wouldn't have looked too different anyway. I got Scott's decals yesterday, and applied them to the shoulder and right chest plate. After applying them, I was able to finish painting those 2 pieces and continue on into the final weathering phase.
    Here are the shoulders. These pics are outdoors, but it's pretty cloudy today and I don't know if the colors will translate like they should. The shoulder bells have been shaded with a mix of orange/reddish-brown pastels, and then sealed with dull coat. The bell with the decal was "reverse masked," leaving the decal exposed so I could mist it with some gray-brown and a little flat black. All I have left to do on this is go back with some flat white and do some final detailing on the decal.





    With the decal in place on the chest plate, I finished painting the silver/yellow damage, and black misted it. (I went ahead and black misted all the other 'green' armor, too.)
    Same as the shoulder, I'll go back with some flat white and paint some small details on the decal.



    So if it weren't for the fact that I'll be redoing the left chest plate, this set of armor would be done tomorrow! Hopefully the new chest plate will get here tomorrow and I'll be able to finish up within the next few days.
    Almost there!
  14. jodo's Avatar
    Member Since
    Nov 2004
    Posts
    2,207
    Jan 6, 2008, 6:53 PM - Re: Lucksy31's FP3 Armor Progress #39

    Excellent paint job man, it gets excitting when you know you'll be done in a matter of days dosen't it?
  15. I helped at SDCC '08 GCNgamer128's Avatar
    Member Since
    Jan 2006
    Posts
    5,520
    Jan 6, 2008, 8:02 PM - Re: Lucksy31's FP3 Armor Progress #40

    Very nice job Superjedi! You did an amazing paint job also!
  16. Halo_1's Avatar
    Member Since
    Oct 2002
    Posts
    1,437
    Jan 6, 2008, 10:12 PM - Re: Lucksy31's FP3 Armor Progress #41

    Eric,

    You're a madman with the paints bro! I said it before, I'll say it again, sweet work! marry me? LOL!

    Keep em coming bro!

    Stay safe,

    Tim.
  17. Admin Staff webchief's Avatar
    Member Since
    Mar 2002
    Posts
    4,704
    Jan 7, 2008, 8:46 AM - Re: Lucksy31's FP3 Armor Progress #42

    Looking great Eric!
  18. Lucksy31's Avatar
    Member Since
    Apr 2007
    Posts
    2,225
    Jan 7, 2008, 11:28 AM - Re: Lucksy31's FP3 Armor Progress #43

    Eric,
    These look just outstanding. It'll be x-mas in Jaruary for me!!
  19. Jluck's Avatar
    Member Since
    Mar 2007
    Posts
    441
    Jan 7, 2008, 11:58 AM - Re: Lucksy31's FP3 Armor Progress #44

    great work as always eric! were u going to weather it strictly w/ pigments or will there be a little variety??
  20. superjedi's Avatar
    Member Since
    Jul 2003
    Posts
    4,369
    Jan 7, 2008, 3:17 PM - Re: Lucksy31's FP3 Armor Progress #45

    Thanks guys! It's almost done now.
    The weathering on the shoulders/knees is just about done. Now that it's clearcoated, I'll go back and add a couple of small silver scratches, but that's about it.

    UPDATE: January 7th

    While I'm waiting for the new piece, I did some additional work on a couple of the pieces.
    On the shoulder and chest decals, after they were misted, I took a very fine brush and some flat white and did some scratches. This finishes those parts.





    I also added the lighter green scratches on the ab plate. I really like the look of these.





    Once I get the new left chest piece, it will have a couple of these lighter scratches as well.
  21. Nobody's Avatar
    Member Since
    Apr 2004
    Posts
    146
    Jan 7, 2008, 3:22 PM - Re: Lucksy31's FP3 Armor Progress #46

    Looks great Eric. Are you painting the backplate as well?
  22. superjedi's Avatar
    Member Since
    Jul 2003
    Posts
    4,369
    Jan 7, 2008, 4:17 PM - Re: Lucksy31's FP3 Armor Progress #47

    Yeah I'm doing the whole armor set. . . guess I hadn't posted pics of the back plate yet. I'll have to do that.

    QUICK UPDATE: January 7th

    The new chest plate is here! Yay! FP even "final trimmed" the piece instead of letting me have all the fun of doing it. All I need to do is use Scott's new measurements to cut the light slots, and then paint it up.
    Wish I didn't have to go to work soon! I'm anxious to get started.
    Thanks for getting the new part out so quick, Chris.
  23. fettpride's Avatar
    Member Since
    Mar 2002
    Posts
    2,654
    Jan 7, 2008, 4:52 PM - Re: Lucksy31's FP3 Armor Progress #48

    Saweeet ! Thought I'd try to save you a little time since you already got a little behind because of it

    Looking amazing bro !

    FP
  24. jodo's Avatar
    Member Since
    Nov 2004
    Posts
    2,207
    Jan 7, 2008, 9:40 PM - Re: Lucksy31's FP3 Armor Progress #49

    Those light green scratches bro......Are awsome!!!!!!:thumbup
  25. al13ns's Avatar
    Member Since
    Dec 2006
    Posts
    384
    Jan 8, 2008, 7:25 AM - Re: Lucksy31's FP3 Armor Progress #50

    :thumbup:thumbup:thumbup too awesome

Similar Threads

  1. Lucksy31 On VACA until 4/2
    By Lucksy31 in forum Site Support & News
    Replies: 5
    Last Post: Apr 2, 2010, 9:17 PM
  2. Lucksy31's ROTJ FP lid
    By wickedbeard in forum Boba Fett Helmet
    Replies: 13
    Last Post: Jun 21, 2009, 8:51 AM
  3. HAPPY B_DAY LUCKSY31!!!
    By 22ssplt in forum Site Support & News
    Replies: 14
    Last Post: Feb 22, 2009, 8:42 AM
  4. Replies: 17
    Last Post: Oct 1, 2008, 3:43 PM
  5. Lucksy31's Completed MOW JetPack(Pic Intense)
    By Lucksy31 in forum Boba Fett Costume
    Replies: 13
    Last Post: Feb 6, 2008, 10:54 PM