Jet pack measurement Help

Hey guys I know there are a few threads on this subject but I need a measurement for a particular part

the part is question is this

20542009.png


the area thats starred there separate parts i know but the diameters and lengths and such would be a big help if any one knows them

thanks guys
 
I seem to be missing something about that pic

does anyone know the correct measurement for that area

It's a picture of a jetpack Nathan (slave1pilot) painted that is featured on his site:

WELCOME TO SLAVE1PILOT.COM

You probably just saw it somewhere else, and I'm sure Nate just took it as flattery.

Someone with a jetpack ought to be able to get that measurement for you -- might differ depending on whether it is a MoW, BFUK, or Bobamaker, but all should be about the same. I'd pull the measurement off mine, but it is currently in the master's hands. (y)
 
I'm sure Nate just took it as flattery.

I did.
I thought it was amusing that one of my pics was used when so many pics of the real thing are in the gallery.

I'd pull the measurement off mine, but it is currently in the master's hands. (y)
I'm hardly "the Master" but I do ok.
I took a measurement of the MOW pack below, and I got right at 45mm from base to the tip of the tank cap. It would probably be best to contact MOW himself for the specs of his pack though.
Here's Madmartigan's MOW pack midway through the painting process.
(please ignore the clutter, the Star Wars Room is a bit unkempt at the moment ;) )
madmartigan008.jpg
 
This thread is more than 13 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top