Page 1 of 3 123 LastLast
Subscribe
  1. Hotshot's Avatar
    Member Since
    Nov 2005
    Posts
    316
    Feb 4, 2008, 7:46 PM - ROTJ STUNT Blaster is a go, master nearing completion #1

    Hi gang!
    With the success of the Scout blasters, I've been talked into doing a Fett Blaster amongst the others I'll be offering. No pics as of yet, and I only need to know interest and suggestions .
    By that, I mean, of course, who's interested, and how would you like to see the make up of the blaster?
    Rubber stock, resin bracket, rubber body?
    All firm rubber?
    Etc. . .
    This will of course, affect the cost.

    I can say, that an all rubber ROTJ model would run between 120 & 150. They would be finihsed, and shipped at a price in that range.

    Now, even without the suggestions, the master will be DONE at the end of this week, and the run will begin next week. So, if you are interested, be sure you'll be able to buy!!!

    I'll also let you know runs would be ongoing through the year, probably in bursts of 10-15.

    Thanks! I look forward to working on this if enough folks are interested!!!
    Last edited by Hotshot; Apr 8, 2008 at 8:20 PM.
  2. Ciscotiger's Avatar
    Member Since
    Nov 2007
    Posts
    120
    Feb 4, 2008, 8:05 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #2

    I'm interested in the hard/firm rubber ROTJ EE-3 blaster. Of course, I can't wait to see photos. No resin please.
  3. jjv5150's Avatar
    Member Since
    Jun 2007
    Posts
    113
    Feb 4, 2008, 8:15 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #3

    AlsoI'm interested in a ROTJ EE-3 blaster . prefer hard/rubber..but either way put me down, pending price/pics..thanks jjv5150..ps interested also in any trooper blaters if available...
  4. batninja's Avatar
    Member Since
    Jan 2003
    Posts
    1,900
    Feb 4, 2008, 8:18 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #4

    I would be interested as well, pending pics and price!
  5. Hotshot's Avatar
    Member Since
    Nov 2005
    Posts
    316
    Feb 4, 2008, 8:34 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #5

    Thanks guys! Please, more opinions!!
  6. stormtrooperguy's Avatar
    Member Since
    Dec 2004
    Posts
    5,039
    Feb 4, 2008, 10:08 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #6

    i'd say you REALLY want to use something hard / strong for the bracket that connects the stock.

    even on my hyperfirm (which had a reinforced frame), it was a bit wobbly there.
  7. batninja's Avatar
    Member Since
    Jan 2003
    Posts
    1,900
    Feb 4, 2008, 10:10 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #7

    I agree. I wouldn't be opposed to, say, an aluminum bracket....
  8. Devilstar2k2's Avatar
    Member Since
    Aug 2006
    Posts
    1,151
    Feb 4, 2008, 10:42 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #8

    Depending on the master, I'd be down for one.
  9. Member Since
    Nov 2007
    Posts
    75
    Feb 5, 2008, 1:45 AM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #9

    Like some of the others have said, a firm rubber blaster, no resin and possibly reinforced with aluminum at the bracket.

    Depending on the master, you can count me in!
  10. MediaGuyPJ's Avatar
    Member Since
    Jun 2005
    Posts
    463
    Feb 5, 2008, 4:46 AM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #10

    Hey man I am totally in!

    Just let me know.

    Pete
  11. Mandalor78's Avatar
    Member Since
    Sep 2007
    Posts
    42
    Feb 5, 2008, 7:25 AM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #11

    Im in for a Rotj blaster

    Thomas
  12. Wolfie's Avatar
    Member Since
    Nov 2007
    Posts
    431
    Feb 5, 2008, 7:44 AM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #12

    interested depending on pics of the master as well...
  13. I helped at SDCC '08 MandalorFett's Avatar
    Member Since
    Nov 2005
    Posts
    2,738
    Feb 5, 2008, 1:14 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #13

    batninja said: View Post
    I would be interested as well, pending pics and price!
    Ditto. ESB recipe in the works too?
  14. Hotshot's Avatar
    Member Since
    Nov 2005
    Posts
    316
    Feb 5, 2008, 5:49 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #14

    Of course! The major worry on that is how to the barrel end/MMP. i'm thinking thin walled PVC.
    But, I've solved the issue of the bracket. It will be rubber, but reinforced with solid plastic square rodding. While the risk of breakage is present, using metal would raise the cost further than I'm willing to sell.
    But, until the master is done, I'm keeping an open mind.
  15. Devilstar2k2's Avatar
    Member Since
    Aug 2006
    Posts
    1,151
    Feb 6, 2008, 11:10 AM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #15

    Hotshot said: View Post
    I've solved the issue of the bracket. It will be rubber, but reinforced with solid plastic square rodding. While the risk of breakage is present, using metal would raise the cost further than I'm willing to sell.
    But, until the master is done, I'm keeping an open mind.
    tk7602 said: View Post
    i'd say you REALLY want to use something hard / strong for the bracket that connects the stock.

    even on my hyperfirm (which had a reinforced frame), it was a bit wobbly there.
    Why not sell them in 3 pieces? Then the buyer can decide on the bracket. Easier to ship that way too. Might have to compare spec on your bracket to 4242's though. Just an idea... I don't know much about rubber blasters, to be honest. Seems like a good idea to me.


    -Shawn
  16. Member Since
    Nov 2007
    Posts
    75
    Feb 6, 2008, 2:27 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #16

    I just put my dirty little paws on a Hyperfirm, so you can take me of the list, sorry
  17. formerly old_jedi_mind_trick Bobby Fett UK's Avatar
    Member Since
    Nov 2007
    Posts
    1,453
    Feb 6, 2008, 2:57 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #17

    Put me down for a ROTJ hard rubber, when I see photo, please.
  18. TR 4059's Avatar
    Member Since
    Nov 2007
    Posts
    696
    Feb 6, 2008, 4:04 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #18

    Put me on the intrest list Either rotj or esb works for me.
  19. Feb 6, 2008, 4:09 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #19

    im interested to in a ROTJ one!!
  20. Hotshot's Avatar
    Member Since
    Nov 2005
    Posts
    316
    Feb 7, 2008, 2:11 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #20

    Well, I'm happy that you guys are really as excited as I am about this. I'm halfway throught he ROTJ blaster, and I'm coming to the scope, which is the easiest part, and thought I'd ask . . .

    Waht would you guys think about the chopped half scope??? YOu can view it in the visual dictionary, and the famous pull out poster.
    I'm always up for doing something different, and I thought this would be cool.

    Holler your thoughts!
  21. formerly old_jedi_mind_trick Bobby Fett UK's Avatar
    Member Since
    Nov 2007
    Posts
    1,453
    Feb 7, 2008, 3:00 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #21

    Can you post a pic? Will it work for a SE fett?
  22. Devilstar2k2's Avatar
    Member Since
    Aug 2006
    Posts
    1,151
    Feb 7, 2008, 4:35 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #22

    I'm not sure what a chopped off scope is...? I was hoping for a screen accurate blaster.
  23. Hotshot's Avatar
    Member Since
    Nov 2005
    Posts
    316
    Feb 7, 2008, 5:07 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #23

    Pop open your Visual Dictionaries, and you'll see what I mean. The front tech section has a shot of the whole scop, the rear photos on Boba's page, he's holding the stunt version that luke chops.
  24. batninja's Avatar
    Member Since
    Jan 2003
    Posts
    1,900
    Feb 7, 2008, 8:31 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #24

    No choppie the scopie for me!
  25. teabo's Avatar
    Member Since
    Aug 2007
    Posts
    104
    Feb 7, 2008, 8:42 PM - Re: Interet thread and suggestions, STUNT ROTJ Blaster #25

    put me down interested depending on photos

Similar Threads

  1. STUNT ROTJ Fett rifles, finally! Big pics.
    By Hotshot in forum Boba Fett Costume
    Replies: 413
    Last Post: Apr 29, 2009, 9:54 AM
  2. ASI 4X20 Scope - RotJ Stunt and Hero
    By Art Andrews in forum Boba Fett Costume
    Replies: 12
    Last Post: Feb 27, 2009, 3:52 PM
  3. STUNT ESB Rifles, suggestions, questions, etc.
    By Hotshot in forum Boba Fett Costume
    Replies: 38
    Last Post: Dec 12, 2008, 2:43 PM
  4. Official ROTJ Blaster Thread
    By Migrate from As You Wish in forum Boba Fett Costume
    Replies: 101
    Last Post: Sep 1, 2007, 4:06 AM
  5. Blaster Suggestions
    By The Clayster in forum Expanded Universe Bounty Hunters
    Replies: 11
    Last Post: May 16, 2007, 10:41 PM