Interest in aluminum stock connector arms?

hankey01

Hunter
Interest in aluminum stock connector arms/brackets?

Any interest in me doing a run of these aluminum connectors?

I'll start in interest list here...and if I get 10 ppl committed I'll do a run. They are 3/16" aluminum I believe and I used WOF's template for the shape. They would be cut out on a CNC plasma table (NOT laser cut edges). Any changes would need to be a consensus, but can be done. I'd be looking for $25 each including shipping.

If I can't get 10 or more people it wouldn't really be worth the effort.

Thanks!

Interest List:

1. Kibosh (maybe)
2. zanenigma
3.
4.
5.
6.
7.
8.
9.
10.

HPIM1820.JPG


HPIM1817.JPG


HPIM1825.JPG


HPIM1822.JPG
 
Last edited by a moderator:
I might be interested in one of these. How hard are they to drill through? I'd want to be able to screw this into my stock, and to my grip.
 
Aluminum is pretty easy to drill through. I will be doing that myself soon.

Thanks!

Edit:
I drilled 3 holes through mine last night...VERY easy!
 
Last edited by a moderator:
I would be interested in an aluminum stock connector arm, you can count me in if you start a run, do offer or know how I can get a wooden stock?
 
I started an interest list. :)

Zanenigma, the stock was made for me by a friend. Unfortunately I don't think he is interested in doing a run.
 
This thread is more than 16 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top